A. the integrity of the firmware can be verified by the device before upgrading.
B. only super administrators are able to initiate a firmware upgrade.
C. only one device at a time is upgraded, to avoid interruptions.
D. the upgrade can be scheduled to take place at a non-critical time.
A. Lens calculator
B. AXIS People Counter
C. AXIS Forensic Search
D. Pixel counter
A. Frame rate is reduced
B. Resolution is reduced
C. Noise is increased
D. Light sensitivity is decreased
A. TCP
B. MAC
C. Ip
D. UDP
A. 100 lux
B. 1000 lux
C. 400 lux
D. 25 lux
A. maintain its IP-rating.
B. remain in focus constantly.
C. stay compatible with the VMS.
D. stay as cybersecure as possible.
A. Conformity with SMPTE standard.
B. Life time of cable installations.
C. Surge protection.
D. Image quality.
A. Verify that the SD card is properly ejected before the upgrade is started
B. Verify that both rack mounted and standalone servers support the latest firmware version
C. Verify that the IEEE 802.3af compliant PoE switch supports the latest firmware version
D. Verify that the Video Management Software (VMS) supports the latest firmware version
A. Flickering effects on video
B. Motion blur on moving objects
C. Increased random noise
D. Increased color saturation
A. 11.4 GB
B. 2.6 GB
C. 5.4 GB
D. 24.2 GB
A. The sensor will attract dust.
B. The camera electronics will short circuit.
C. The shutter will break.
D. The lens electronics will short circuit.
A. Grass
B. Concrete
C. Snow
D. Sand
A. The built-in IR immediately melts any snow landing on the front side
B. The weather shield is tilted with the camera, protecting the glass front
C. The camera can vibrate to shake off any drops from the glass front
D. The built-in wipers automatically removes any drops blocking the view
A. the aspect ratio and the frame rate.
B. the illuminance and the depth of field.
C. the total resolution and the installation height.
D. the horizontal resolution and the field of view.
A. Selecting the right cameras and choosing AXIS Camera Station licenses.
B. Plan network topology and determining camera coverage.
C. Determining camera coverage and creating a bill of materials.
D. Estimating bandwidth and creating a bill of materials.
A. The video stream only needs to be sent once, even though there are multiple viewers.
B. Many cameras can share the same network connection.
C. The video stream reaches every computer in the network simultaneously.
D. The video stream is rerouted in case of network dropout.
A. Adapting cable for RJ48 connectors
B. Keeping connectors dust-free prior to installation
C. Puncturing the cable gasket cleanly
D. Meeting fire code requirements
