300-430試験無料問題集（355題）「Cisco Implementing Cisco Enterprise Wireless Networks 認定」

出題：1

More people are working from home, so an engineer must configure OEAPs to support the users.
The security team already configured NAT with a public IP address that points to the internal WLC IP address. The APs also have been configured with the public WLC IP address, but APs cannot join the controller yet. Which action resolves this issue?

A. Create an ACL in WLC to accept the OEAPs.

B. Configure the public WLC IP address on the home router.

C. Configure the internal WLC IP address on the OEAPs.

D. Enable NAT on the WLC to configure the public IP address.

正解：D 解答を投票する

解説: (GoShiken メンバーにのみ表示されます)

出題：2

A network engineer must deploy a Cisco wireless solution for an event company. Cisco ISE will be used for user authentication based on groups. Each user group must be placed in its own VLAN after authentication. Where in the Cisco ISE user interface must the configuration be made?

A. Profiling

B. Client Provisioning

C. Allowed Protocols

D. Authorization Profiles

正解：D 解答を投票する

解説: (GoShiken メンバーにのみ表示されます)

出題：3

An engineer is using Cisco Prime Infrastructure reporting to monitor the state of security on the WLAN. Which output is produced when the Adaptive wIPS Top 10 AP report is run?

A. last 10 wIPS events from monitor mode APs

B. last of 10 sniffer mode APs with the most wIPS events

C. last 10 wIPS events from sniffer mode APs

D. last of 10 monitor mode APs with the most wIPS events

正解：A 解答を投票する

解説: (GoShiken メンバーにのみ表示されます)

出題：4

A wireless engineer completed the configuration of QoS on the WLC and the policy map on the switch that the WLC is connected. During testing, the engineer realizes that the markings are preserved in an incorrect way in the end-to-end traffic flow. What is missing from the configuration?

A. class map

B. ACL

C. NetFlow

D. port channel

正解：A 解答を投票する

解説: (GoShiken メンバーにのみ表示されます)

出題：5

Which two steps are needed to complete integration of the MSE to Cisco Prime Infrastructure and be able to track the location of clients/rogues on maps? (Choose two.)

A. Add the MSE to Cisco Prime Infrastructure using the Cisco Prime Infrastructure communication credentials configured during set up.

B. Apply a valid license for location tracking.

C. Synchronize access points with the MSE.

D. Apply a valid license for Wireless Intrusion Prevention System.

E. Add the MSE to Cisco Prime Infrastructure using the CLI credentials.

正解：A,B 解答を投票する

解説: (GoShiken メンバーにのみ表示されます)

出題：6

Refer to the exhibit. An engineer implemented a CPU ACL on the controller, and now the Web Authentication Redirect page is not working. What must be changed for the redirect page to work?

A. The Web Authentication Redirect must be HTTP.

B. The permit statement for 192.0.2.100 must be in both directions.

C. The Web Authentication Redirect must be configured on the CPU ACLs.

D. The permit statement must be directed to the controller management address.

正解：C 解答を投票する

解説: (GoShiken メンバーにのみ表示されます)

出題：7

An engineer must enable AVC on a Cisco Catalyst 9800 WLC and send the NetFlow data to a NetFlow collector. What must be configured on the controller with the IP address and port number of the NetFlow collector?

A. flow exporter

B. flow record

C. flow monitor

D. flow policy

正解：A 解答を投票する

出題：8

An engineer set up a local authenticated Cisco FlexConnect AP with a guest LAN. Guests report not being able to authenticate. Which configuration must be changed on the WLAN for guests to be able to authenticate?

A. central authentication

B. backup RADIUS server

C. RADIUS NAC

D. AAA override

正解：A 解答を投票する

出題：9

Refer to the exhibit. You enter the command on a Cisco Catalyst 3850 Series Switch that runs Cisco ISO XE. What does the command do?

A. It captures information on the length of the authorized session, as well as the bandwidth usage of the client.

B. It defines the RADIUS server used to track which sessions are still active.

C. It defines the user identity or the device identity to be validated by the RADIUS server.

D. It defines the level of access of the user or the device.

正解：D 解答を投票する

出題：10

An engineer is implementing a FlexConnect group for access points at a remote location using local switching but central DHCP.
Which client feature becomes available only if this configuration is changed?

A. mDNS

B. multicast

C. static IP

D. fast roaming

正解：C 解答を投票する

解説: (GoShiken メンバーにのみ表示されます)

出題：11

An engineer must set up EAP-TLS authentication on all Cisco FlexConnect APs in local authentication mode. Which certificates must be added to allow seamless roaming?

A. client and controller root CA

B. client and AP root CA

C. controller and AP root CA

D. AP and controller root CA

正解：A 解答を投票する

解説: (GoShiken メンバーにのみ表示されます)

出題：12

A customer must use deep-packet inspection on the Cisco Catalyst 9800 Series Wireless Controller. The details must include all wireless client use details. Where must AVC be configured to meet this requirement?

A. AP join tag

B. policy profile

C. WLAN

D. RF tag

正解：C 解答を投票する

出題：13

An engineer must configure client profiling on a Cisco WLC v8.2 and a Cisco ISE. The customer has a complex wireless network with different AP modes, depending on locations and functionalities. Which two AP modes should be configured for full functionality? (Choose two.)

A. FlexConnect

B. workgroup bridge

C. local authentication

D. standalone

E. local

正解：A,E 解答を投票する

出題：14

Refer to the exhibit. An engineer must preserve a QoS marking sent by the Cisco Jabber software running on PC1. Which marking value must be trusted on port Fa 0/6?

A. 802.1p

B. DSCP

C. CoS

D. IP precedence

正解：B 解答を投票する

出題：15

A retail company has created a promotional video to promote the opening of a new branch store named RET-FB5B1C246027HE. The video must be sent over wireless multicast and only received by interested hosts only. What feature should be used?

A. TPC

B. WMM

C. WMF

D. DCA

正解：C 解答を投票する

解説: (GoShiken メンバーにのみ表示されます)

300-430試験無料問題集「Cisco Implementing Cisco Enterprise Wireless Networks 認定」