D-PE-OE-01試験無料問題集（420題）「EMC Dell PowerEdge Operate v2 認定」

出題：1

In order to Improve efficiency of the Data Center, the IT department has been tasked with auditing the health and performance, including any sensor alerts, for all Dell servers from the past quarter. Which two basic actions must be taken on the servers in order to obtain the requested information?

A. Enable RACADM

B. Apply iDRAC Enterprise License

C. Set iDRAC networking to use DHCP

D. Acquire appropriate Login privilege

正解：B,D 解答を投票する

解説: (GoShiken メンバーにのみ表示されます)

出題：2

You have been tasked with configuring a Dell EMC PowerEdge server to be a file server. The server operating system has been installed and there are 8 x 1TB drives that must be configured.
Which RAID configuration would provide the maximum usable space with maximum redundancy?

A. RAID 0

B. RAID 10

C. RAID 5

D. RAID 50

正解：D 解答を投票する

出題：3

A server has two 1100w power supplies. The system needs to enable or disable power supplies dynamically depending on power needs. Power Supply 2 needs to be main power supply.
Which two settings should the technician change?(Choose two.)

A. Enable Power Factor Correction

B. Set Power Cap to 1100w for the system

C. Enable Hot Spare for power supplies

D. Set Primary Power Supply to PSU 2

E. Set Default Power Supply to PSU 2

正解：C,D 解答を投票する

出題：4

Refer to the exhibit.

Match each callout to the Dell EMC PowerEdge server model shown.

正解：

出題：5

How can the ePSA be accessed?

A. OMSA

B. VMware vSphere plug-in

C. iDRAC

D. Lifecycle Controller

正解：C 解答を投票する

出題：6

A technician recently installed a supported third-party PCIe expansion card and updated the iDRAC firmware on a server. The server is now experiencing internal temperatures that are higher than normal. A second technician is troubleshooting the server and discovers that the expansion card is hot to the touch.
What should the technician do to resolve this issue?

A. Replace the fans one at a time until the faulty fan is identified.

B. Adjust the power settings.

C. Adjust the Multi Vector Cooling values.

D. Reseat all the fans.

正解：C 解答を投票する

出題：7

A technician needs to configure a server to allow the OS to manipulate processor frequencies for higher power efficiency.
Which setting can they enable to achieve this?

A. Performance per Watt (DAPC)

B. Logical Processing

C. Performance per Watt (OS)

D. Adjacent Cache Line Prefetch

正解：C 解答を投票する

出題：8

Refer to the exhibit.

A technician tries to apply a BIOS update through the iDRAC web interface on a server using the Linux Dell Update Package file BIOS_2H4CC_LN_2 0.2.BIN. The error shown occurs. How should this error be fixed?

A. Download and apply the Windows Dell Update Package file

B. Extract the Linux Dell Update Package and apply payload file

C. Reset the iDRAC and reapply the update

D. Redownload the file to replace corrupted version and reinstall

正解：A 解答を投票する

出題：9

A technician builds a bootable ISO with Repository Manager, and then mounts the ISO via the iDRAC virtual console. After the updates have completed, the technician reboots the server to apply the updates. When reviewing the updates, the technician determines NOT all updates were applied.
What is causing this issue?

A. An OS was NOT installed prior to upgrading the firmware.

B. The firmware must be manually updated from the iDRAC.

C. The iDRAC update caused virtual media disconnect.

D. A SUU repository must be used to update the firmware instead of the bootable ISO.

正解：D 解答を投票する

出題：10

Which server security feature verifies the cryptographic signatures of the UEFI driver in Dell EMC PowerEdge 14G and 15G servers?

A. TPM

B. Enterprise Key Management

C. iDRAC Credential Vault

D. Secure Boot

正解：D 解答を投票する

出題：11

What is a difference between iDRAC Direct 2.0 in 14G and iDRAC Direct in 13G Dell EMC PowerEdge servers?

A. Speed of the connection

B. Availability on certain low-end servers

C. Sharing of iDRAC Direct port with OS

D. Support on rack servers

正解：A 解答を投票する

D-PE-OE-01試験無料問題集「EMC Dell PowerEdge Operate v2 認定」