D-PST-MN-A-24試験無料問題集（63題）「EMC Dell PowerStore Maintenance Achievement 認定」

出題：1

A Storage Administrator has an existing single appliance Dell EMC PowerStore 3000T cluster. An additional PowerStore 9000T has been purchased to add into the existing cluster.
How does the administrator proceed?

A. Add the new 9000T appliance into the cluster per the procedure; mixed models of the same type are supported

B. The new appliance cannot be added to the cluster; appliance model and type must match when clustering appliances together

C. Additional VLT links on the ToR switching must be configured for the 9000T to support the increased inter-switch network load

D. Remove two of the four NVMe NVRAM drives from the 9000T; the caching configuration of all clustered appliances must match

正解：A 解答を投票する

解説: (GoShiken メンバーにのみ表示されます)

出題：2

How is a service laptop IP configured to connect to the Service LAN port of a Dell EMC PowerStore node?

A. Static IP: 128.221.1.249 and netmask: 255.255.255.0

B. Leave IP address and netmask unconfigured

C. Static IP: 169.254.1.249 and netmask: 255.0.0.0

D. Obtain IP address from DHCP on PowerStore

正解：A 解答を投票する

解説: (GoShiken メンバーにのみ表示されます)

出題：3

What does the command "svc_journalctl -f -g "st_io_monitor""do?

A. Ignores log messages from the specified error and re-occurring errors

B. Retrieves log messages from the specified error and watches for re-occurrence

C. Rotates the log based on the specified error

D. Deletes all logs before the specified error

正解：B 解答を投票する

解説: (GoShiken メンバーにのみ表示されます)

出題：4

When a Dell EMC PowerStore node powers up in service mode, what are the commands and sequence used from the appliance SSH client to restore the node back to normal?

A. svc_node restart
svc_rescue_state start

B. svc_rescue_state normal
svc_node start

C. svc_node shutdown
svc_rescue_state clear

D. svc_rescue_state clear
svc_node reboot

正解：D 解答を投票する

解説: (GoShiken メンバーにのみ表示されます)

出題：5

Which component is only replaceable by qualified personnel?

A. Memory module

B. Power supply

C. Embedded I/O module

D. Base enclosure

正解：D 解答を投票する

解説: (GoShiken メンバーにのみ表示されます)

出題：6

What does the output of the command "svc_diag list -- basic" show?

A. Failover status

B. Boot mode

C. Service tag

D. License status

正解：C 解答を投票する

解説: (GoShiken メンバーにのみ表示されます)

D-PST-MN-A-24試験無料問題集「EMC Dell PowerStore Maintenance Achievement 認定」