DEE-1721試験無料問題集（63題）「EMC Expert

出題：1

You want to perform an SCOS ISO update. However, you need to determine the BMC IP address first. What is one way to determine the BMC IP address?

A. Perform a trace route from the controller CLI to the virtual IP address

B. In the Dell Storage Manager Client, highlight the controller under the "Hardware" tab and select Edit Settings

C. Select the "Storage Centers" tab from the Data Collector to display the BMC IP address for each controller

D. Select the "Hardware" tab from the Data Collector to display the BMC IP address for each controller

正解：C 解答を投票する

出題：2

A storage administrator has several hosts and redundant FC switches that been in production for six months.
All zoning complies with port zoning best practices. A new switch is added t one fabric and immediately all paths on that fault domain drop. The network administrator confirms that the switches are properly cascaded and working, and that no zoning or configuration changes have been made.
In order to correct the issue with the dropped paths, which information should be provided to the administrator?

A. SCOS must be uploaded to support the new switch

B. Domain ID of the switches changed

C. Port zoning requires that FCoE is enabled for high availability

D. Server mapping must be updated to use the new paths

正解：A 解答を投票する

出題：3

You have created a snapshot profile in which one snapshot is taken every 10 minutes with an expiration time set to "1 week". You goal is to Improve space utilization without changing the 10-minute Interval between the snapshots.
Which action will achieve this goal?

A. Set the minimum "Allowed Repeat Interval" to 15 minutes

B. Decrease the expiration time

C. Select the "Allow Snapshots" option to coalesce into active snapshot

D. Change the interval to 24 hours

正解：C 解答を投票する

出題：4

You need to physically install an I/O card into an SC9000 storage array. What must be considered when installing the I/O card?

A. IPC connection and ESD

B. I/O slot priority and I/O card BIOS

C. I/O card BIOS and IPC connection

D. ESD and I/O slot priority

正解：C 解答を投票する

出題：5

You installed the Dell Storage Manager Server Agent on a Microsoft Windows 2008 R2 server. In addition, you configured White Space Recovery for the specific server. However, recovery is not completing successfully when it is scheduled to run.
What should be changed to allow White Space Recovery to run successfully?

A. Convert the disk targeted for space recovery from basic to dynamic in Windows

B. Convert the disk targeted for space recovery from NTFS to FAT32 in Windows

C. Globally enable Automated Space Recovery in the Server View of Dell Storage Manager

D. Create a Live Volume replication for the volume targeted for space recovery in Dell Storage Manger.

正解：D 解答を投票する

出題：6

While installing Dell Storage Manger (DSM) at a company's location, they have requested that a Microsoft SQL server's IP address; however, it is missing the required login Information.
Which username should be used to connect the DSM to the DSM to the database upon installation?

A. domain administration

B. local administration

C. root

D. sa

正解：B 解答を投票する

出題：7

You need to upgrade an existing dual controller SC030 to a dual controller SC8000storage array. While preparing to start the physical upgrade, you need to documents the existing port configuration. Which steps are required to accurately document the existing poet configuration?
A)

B)

C)

D)

A. Option D

B. Option C

C. Option A

D. Option B

正解：D 解答を投票する

DEE-1721試験無料問題集「EMC Expert - SC Series 認定」