HP2-T23試験無料問題集（109題）「HP Supporting Industry Standard Server Solutions 認定」

出題：1

Which feature should you enable in RBSU in a ProLiant Gen8 server lo reduce processor power usage and improve overall performance in some applications?

A. Processor Core Disable

B. Intel Hyper-Threading

C. OS Control Mode

D. HP Dynamic Power Savings Mode

正解：A 解答を投票する

出題：2

An engineer is installing an HP R7000 UPS and an Extended Runtime Module (ERM) in an existing HP 10642 G2 rack. This rack contains 10 ProLiant DL380e Gen8 servers mounted from 1U upward.
How should the engineer perform this installation?

A. Remove the lowest ProLiant DL380e Gen8 servers and mount the R7000 and the ERM at the lowest position in the rack. Mount the removed ProLiant DL380e Gen8 servers at a higher position in the 10642 G2 rack.

B. Mount the R7000 UPS at 10U in the 10642 G2 rack with the ERM on top of the R7000 UPS.

C. Mount the R7000 at the highest position possible in the 10642 G2 rack with the ERM just below the UPS.

D. Remove the two lowest mounted ProLiant DL380e Gen8 servers and mount the R7000 at the bottom of the 10642 G2 rack. Mount the two removed ProLiant DL380e Gen8 servers at the top of the 10642 G2 rack. Mount the ERM above the remaining original mounted ProLiant DL380e Gen8 servers.

正解：A 解答を投票する

出題：3

What is needed to support Dynamic Power Capping at the enclosure level?

A. Redundant power supplies

B. Redundant Onboard Administrator modules

C. Insight Control power management software

D. Intelligent PDU (iPDU) and intelligent extension bars

正解：C 解答を投票する

出題：4

What are some general requirements that must be met to update Virtual Connect firmware? (Select three.)

A. The VC firmware must not be flashed before the configuration is backed up.

B. The correct deployment order must be set.

C. The enclosure must not be part of a domain.

D. The VC domains must not be in Maintenance Mode, so the firmware updates have direct access.

E. Multiple instances of the Virtual Connect Support Utility (VCSU) must be run, with multiple clients, to access an enclosure faster.

正解：A,B,C 解答を投票する

出題：5

Which software tool should you use to deploy an operating system to a ProLiant BL460c Gen8 server blade?

A. Array Configuration Utility

B. Intelligent Provisioning

C. System Management Homepage

D. SmartStart

正解：B 解答を投票する

出題：6

What should you do if an online firmware flash of the system board fails?

A. Download a new version of the ROM, reboot the server and try again.

B. Reboot the server, remove power, and try again.

C. Retry the flash before rebooting the server.

D. Replace the system board because the flash is corrupt.

正解：A 解答を投票する

出題：7

Which statements are correct about the HP Customer Self Repair (CSR) program?

A. A travel and labor charge applies when customers request HP to replace parts.

B. A travel and labor charge does not apply when customers decline to replace a mandatory CSR part.

C. A travel and labor charge applies when customers decline to replace an optional CSR part.

D. A travel and labor charge does not apply when customers decline to replace an optional CSR part.

正解：A 解答を投票する

解説: (GoShiken メンバーにのみ表示されます)

出題：8

Which technologies are supported on a ProLiant Gen8 server blade when the appropriate mezzanine card is installed along with the FlexFabric interconnects? (Select two)

A. Adaptive Fibre Channel

B. FCoE

C. iSCSI

D. Accelerated Ethernet

E. InfiniBand

正解：D,E 解答を投票する

出題：9

How many months is the support duration for a Service Pack for ProLiant versions release?

A. 6

B. 18

C. 12

D. 24

正解：C 解答を投票する

出題：10

What are two standard features of the HP Modular Cooling System G2? (Select two.)

A. Phone-home capability of a failing component

B. Non hot-swappable high-airflow fans

C. Use of bi-directional cooling

D. Support for two racks simultaneously

正解：C,D 解答を投票する

HP2-T23試験無料問題集「HP Supporting Industry Standard Server Solutions 認定」