HPE7-A11試験無料問題集「HPE Network Campus Access Professional Architect 認定」

A large multinational financial institution has engaged you to design a new full-stack wired and wireless network for its new 6-story regional office building. The facility's bottom two floors will be retail space for a large banking branch. The upper floors will be carpeted corporate office space, with each floor approximately
100,000 sq ft (9290 sq m). Data centers are all offsite and are outside this project's scope. The customer is underserved by its current L2-based network infrastructure and wants to use modern best practices in the new design. The network must be fully resilient and fault-tolerant, with dynamic segmentation at the edge.
The retail space will provide public guest Wi-Fi access. Retail associates will use corporate tablets for customer service, and the retail floors will contain a mixture of wired and wireless devices. Corporate users will primarily connect wirelessly, although several wired clients, printers, and hard VoIP phones will be used.
The customer also plans to renovate the corporate office space to take advantage of 'smart office' technology.
These upgrades will enable blue-dot wayfinding, presence analytics, and other location-based services.
After further discussions with the customer, the team determined that EVPN-VXLAN will provide dynamic segmentation. The customer wants to ensure that a particular VNI is present only when it is used on that switch.
Which solution is valid and meets this technical requirement?

解説: (GoShiken メンバーにのみ表示されます)
Mark the layer at which Dynamic Multicast Optimization should be activated.
HPE campus multicast network diagram showing services aggregation, standalone core, access aggregation, access layer and wireless access
正解:

Explanation:
Wireless Access Layer (Access Points)
Dynamic Multicast Optimization (DMO) is an HPE Aruba Networking wireless optimization feature that improves the efficiency of multicast traffic delivered to wireless clients.
In a conventional WLAN, multicast traffic is generally transmitted at a basic data rate so that multiple associated clients can receive it. This behavior can consume substantial airtime, particularly when multicast streams carry high-volume application traffic.
When DMO is enabled, the access point converts eligible multicast frames into individual unicast transmissions for subscribed wireless clients.
These unicast frames can be transmitted at each client's supported unicast data rate, reducing channel occupancy and allowing normal 802.11 acknowledgments and retransmissions.
DMO uses IGMP and MLD snooping information to track multicast group membership and determine which wireless devices should receive each multicast stream.
The feature is configured in the WLAN profile and operates at the AP's wireless forwarding interface. It is not an equivalent feature of the campus core, services aggregation, or conventional wired access switching layers.
HPE recommends evaluating multicast application requirements, channel utilization, and client density before enabling DMO because multicast-to-unicast conversion increases the number of transmitted frames.
Official HPE Reference: HPE Aruba Networking AOS-10 Design - Dynamic Multicast Optimization; Broadcast and Multicast Optimization.
Which statement is true regarding HPE Aruba Networking Central licensing for gateways?

解説: (GoShiken メンバーにのみ表示されます)
What distinguishes OM4 cabling from OM5 cabling?
Choose two.

解説: (GoShiken メンバーにのみ表示されます)
A global cruise-line company needs to modernize its existing fleet. It will refresh the ship's "insides" to reduce costs and improve sustainability, replacing all WLAN/LAN hardware. During this refresh, the company will retain its existing security requirements. The CIO also wants to minimize the number of unused switch ports. Any future expansion will always require a hardware refresh. The project starts with the smallest ship, which supports a maximum of 800 guests.
Each ship has a LAN infrastructure with two core switches, up to 10 redundant distribution switches, and up to 500 access switches (400 cabins and 100 technical rooms). The core switches reside in the ship's MDF, while distribution switches reside in the IDFs. Each cabin and technical room receives one individual access switch.
The ship's cabling infrastructure will not be refreshed. Every IDF connects to the MDF using SMF, with two pairs available for the core-to-distribution interconnect. The SM fiber between the MDF and IDF is under 300 meters (980 ft) and is OS1. Each cabin connects to its IDF using one OM2 pair, at a maximum distance of 60 meters (200 ft). Each technical room connects to its IDF with one OM2 pair, at distances from 100 to 150 meters (320 to 500 ft).
For every cabin/technical room, the customer wants to replace the current fanless 2530/2540 switches without altering requirements, except that the uplink to the distribution switch must be upgraded to 10GbE to accommodate increased network traffic, and technical rooms require redundant power.
The WLAN infrastructure will be refreshed 1:1, with no new cabling or AP locations. The WLAN uses 200
/300 Series indoor and outdoor APs running InstantOS (fewer than 300 APs), and the customer has no changes to WLAN requirements.
The cruise-line company will replace its existing Internet connection before the LAN/WLAN refresh. The new Internet connection will offer 99.8% uptime, required to keep paid guest Wi-Fi continually operational.
With this new Internet connection, the CIO wants to base the design on Aruba's ESP architecture because the Internet connection is guaranteed.
Based on best practices and customer requirements, which switch series should be recommended for the core?

解説: (GoShiken メンバーにのみ表示されます)
Which statements correctly describe the Unified Communication (UCC) and Intelligent Call Handling (ICH) capabilities available in HPE Aruba Networking AOS-10, along with their associated subscription and configuration requirements?
Choose two.

解説: (GoShiken メンバーにのみ表示されます)
What should be considered when using existing MMF and upgrading to equipment capable of 10 GbE speeds?
Choose two.

解説: (GoShiken メンバーにのみ表示されます)
You are the lead network architect completing the Bill of Materials (BoM) for a new HPE Aruba Networking ClearPass Policy Manager (CPPM) deployment that must support the following environment:
3,000 wired IoT devices using MAC authentication.
2,000 wireless IoT devices using MPSK.
12,000 corporate laptops-a mix of Windows 11 Desktop PCs and Surface Pro devices-joined to Active Directory and authenticating through EAP-TLS, with posture assessments required through a ClearPass client agent.
1,000 BYOD users, each onboarding 2-3 personal devices and receiving certificates through ClearPass Onboard.
Up to 2,500 guest users per day, using ClearPass Guest with sponsor-based registration.
Which HPE Aruba Networking ClearPass license combination most accurately reflects what should be included in the IRIS-generated Bill of Materials to support this deployment?

Refer to the exhibit.
Original HPE Aruba Networking SSE architecture exhibit

Match the HPE Aruba Networking (ANW) Secure Service Edge (SSE) cloud services with the appropriate descriptions.
正解:

Explanation:
Description
Correct service
Establishes rules that permit or block users' access to website categories based on organizational internal policies.
Secure Web Gateway (SWG)
Provides a comprehensive view of the entire network path, from a user's endpoint device to the application server.
Digital Experience Monitor (DEM)
Provides application-level least-privilege access with continuous verification to specific private applications.
Zero Trust Network Access (ZTNA)
Provides pattern matching for based on Regex and prebuilt data matcher definitions, provides support for OCR.
Data Loss Prevention (DLP)
Protects users' access to Software-as-a-Service (SaaS) applications using SSE public points of presence.
Cloud Access Security Broker (CASB)
HPE Aruba Networking Security Service Edge combines multiple cloud-delivered security and monitoring capabilities to secure application access for users regardless of their physical location.
Secure Web Gateway applies web-access policies, including URL and website-category filtering, to help protect users from inappropriate or malicious Internet destinations.
Digital Experience Monitoring provides visibility into the user-to-application communication path. This allows administrators to identify performance degradation associated with endpoints, network connectivity, service providers, or applications.
Zero Trust Network Access implements identity-aware access to authorized private applications. It enforces least-privilege access rather than broadly exposing internal network resources through conventional remote- access methods.
Data Loss Prevention focuses on detecting and controlling sensitive information. Pattern matching, regular expressions, predefined data identifiers, and optical character recognition support inspection of potentially sensitive content.
Cloud Access Security Broker provides security controls for SaaS applications, including application access governance, monitoring, and data-protection enforcement through cloud-delivered security services.
These capabilities serve complementary purposes rather than replacing one another.
In a campus architecture proposal, the architect should map each SSE capability to corresponding business risks, application-access requirements, compliance obligations, and operational monitoring objectives.
Official HPE Reference: HPE Aruba Networking SSE Workshop - ZTNA, SWG, CASB, DLP, DEM; EdgeConnect SD-Branch Solution Overview - Unified SASE.
It has been identified that the client's existing network must retransmit packets because of possible hardware or configuration issues. Hardware configuration and transport reliability will need to be reviewed before completing the new design.
How should this phenomenon be classified?
Original exhibit - Question 47

解説: (GoShiken メンバーにのみ表示されます)