HPE7-A12試験無料問題集「HPE Network Data Center Professional Architect 認定」

Waratah Hospital, based in Australia, is planning to move many data center services to new facility. (The remaining legacy data center will not be part of this project.) Waratah Hospital hired an external consultant to assist with the new data center network design.
Based on the requirements for the data center network infrastructure, the external consultant has created a high-level design. The below summarizes the content of the design document.
Requirements and information:
- Six racks in the data center room (single row).
- Redundant Top of Rack leaf switches with back-to-front cooling in each rack, providing 10/25 Gbps connectivity to servers, storage, and other devices.
- Four 100 GbE uplinks per leaf switch.
- The customer requested to install all switch ports facing the back of the rack racks (hot aisle.)
- OOB management for servers, storage, and network has to be provided through an external switch with back-to-front cooling. This switch has to be included in the solution. One OOB switch provides connectivity for two racks.
- Core equipment for the OOBM network is being reused.
- Middle-of-row spine switches.
-The data center should connect to the hospital building with links that provide 400 Gbps.
- Internet access is provided through an existing firewall cluster with two firewalls, each firewall in one data room. The second firewall is operating in standby mode, VRRP is utilized on the firewalls for failover. The data center network should connect to these firewalls with links that total
100 Gbps.
- The external link is a dark fiber direct link based on single-mode fiber (OS2). The distance to the main hospital 1.5 KM. The links will terminate on two core switches in the hospital.
The customer also requires:
- 99.999% uptime for this life-critical environment.
- Planned and unplanned downtime has to be minimized.
- Software upgrades are only allowed once per year with close to zero downtime.
- All life-critical resources are accessed locally, and all resources exist within the hospital campus.
- Waratah Hospital requires a highly secure environment for the data center. Encrypted wire speed connectivity between the data room and the hospital is a must-have because the link between the buildings crosses a public road.
- Waratah Hospital has a mix of virtualized (vSphere) servers. Nutanix storage, bare metal servers, backup servers and other devices.
In the past, the hospital has had a security breach that resulted in data loss, network downtime, and identity theft.
Given the scenario, what environmental information should be gathered to complement the design? (Choose two.)

A customer has deployed CX 10000 switches. Fabric Composer, and Pensando Policy and Services Manager (PSM). The switches are discovered in PSM but no VRFs or networks are added. Now the customer wants to get started by applying micro-segmentation to one network.
The customer tells you that they plan to add a policy with rules for permitting desired traffic from endpoints in this network. They will apply it as an egress policy to the network. At this point they will not add any other networks to PSM or apply policies to them. What warning should you give the customer about this plan?

You're presenting your solution to your customer. What's important to include in your presentation?

A customer wants to know how their new EVPN VXLAN fabric will interoperate with their existing WAN edge routers, which only support traditional VLAN trunks. What is an appropriate design element to bridge this gap?

During the assumptions and constraints phase of a proposal, the customer mentions they have a hard budget cap that is lower than what is needed for full fabric redundancy. What should the architect do?

What is the primary purpose of conducting a "current state assessment" before beginning a data center network design?

You have designed a spine and leaf topology, which includes 16 leaf switches and four spine switches. The customer has no existing overlay solution. You are helping the implementer work with the customer to obtain IP address blocks for the design. You plan to ask for these /24 subnets. One for an individual loopback interface for each switch. One for point-to-point connections between leaf and spine switches. What is one of the corrections you must make?

You are finalizing a proposal for a data center network consisting of 14 CX 8325 switches, 6 CX
6300M switches, and Fabric Composer licenses for those switches. What is one assumption that you might include in the assumptions documentation?