H13-629_V2.0試験無料問題集（363題）「Huawei HCIE-Storage (Written) V2.0 認定」

出題：1

In the scenario of protecting the database, the slave uses the virtual snapshot method to verify the services of the production end and the DR-sideand discover the data of the DR on the disaster recovery end. What are the possible reasons that the library can not start normally? (Multiple choice.)

A. When creating a snapshot on the disaster recovery end LUN, the production end is copying data to the disaster recovery end.

B. Disaster recovery side of the data stored in the cache, not yet written to the hard disk.

C. After a snapshot of the LUN of the redundancy site is created, the snapshot is not activated at thesame time.

D. The production end and disaster recovery end adopt the disaster recovery solution of incremental LUN copy, and the incremental data link is abnormal during the synchronization.

正解：A,C,D 解答を投票する

出題：2

On the command line of the N8500 (V200R001) clustered NAS system, you run the NFS> share add / vx / xs-cmfs 100.43.13.210 command.
One system that is used NFS sharing has IP address 100.43.13.11. If the client operating system is Suse Linux, which of the following access to the description of the file system is correct: (multiple choice)

A. Not just the host with IP 100.43.13.210 can access this NFS share

B. Toquery the client for all the NFS shares on the service IP, use the command: showmount -e
100.43.13.11

C. Verify that NFS shared file system has been mounted locally, executable: mount

D. Mount the NFS shared file system locally and execute: mount -t nfs 100.43.13.11:xs-cmfs / mnt

正解：B,C 解答を投票する

出題：3

Zone change on a FC switch will send the switch to send RSCN to the device in a Zone. Which fabric service is responsible for collecting the status of the fabric change information?

A. Fabric Server

B. Fabric Controller server

C. Name Server

D. ManagementServer

正解：B 解答を投票する

出題：4

Which of the following is NOT correct regarding the backup RMAN?

A. Backup slice size is unlimited, but its size can be set by maxpiecesize

B. A backup piece corresponds to a separate input output file

C. The backup piece is a binary file used to store the backup set information

D. One or more backup pieces form a backupset

正解：A 解答を投票する

出題：5

Which of the following functions in VMware leverages content-based read cache (CBRC) of ESXi hosts as shown in the figure to ease the pressure of partial storms in VDI?

A. Linked Clone

B. SE Sparse

C. User Data Management

D. VSA

正解：A 解答を投票する

出題：6

In the mirroring scenario of OceanStor VIS6600T, an engineer detected an abnormal mirroring alarm on the VIS6600T. When you login to the ISM interface, you can view the mirror status of the volume in the corresponding logical disk group based on the alarm and find that the status of a volume in the mirror is NODEVICE.
The reason may be: (multiple choice)

A. Array where the failed mirrored volume is powered down

B. The RAIDarray is degraded on the array where the failed mirrored volume is residing, and the hot spare is being rebuilt

C. The disk on the array on which the failed mirrored volume failed

D. All optical links between the VIS 6600T and the array in which the failed mirror volume is located have failed

正解：A,C,D 解答を投票する

出題：7

When one of the nodes in the Huawei N8000 cluster fails, the service IP address of the node cannot be accessed. Which of the following methods can recover the affected services?

A. Use the other node's business IP access

B. Only manually switch the node's service IP to the remaining nodes

C. Restart the failed node

D. restart service

正解：A,B 解答を投票する

出題：8

Which of the following describes the correct steps of an Oracle database backup?
1, backup oralce controlfile
2, backup oracle archive log
3, oralce placed in backup mode
4, oracle placed in normal mode
5, backup oracle data files

A. 3,1,5,4,2

B. 3,5,2,1,4

C. 3,5,1,2,4

D. 3,5,2,4,1

正解：A 解答を投票する

出題：9

WMware backup transfer mode NBD SSL refers to the backup agent through the TCP / IP network to read the backup data, VSA and ESX between encrypted transmission.

A. True

B. False

正解：A 解答を投票する

出題：10

In a client OceanStor V3 storage array, the engineer examines the log information, the search found that power failure time point has the following:
"1 & 1 or 2 & 3 -" not exist ", you can determine the reason for the system failure to start is not inserted into the safe disk

A. True

B. False

正解：A 解答を投票する

出題：11

Two Huawei N8500 standard nodes opened the CIFS service. Which of the following CIFS parameters allows users to view the other users without seeing the head record?

A. fs_mode

B. oplocks

C. hide_unreadable

D. noguest

正解：C 解答を投票する

出題：12

Oracle database normally starts the opening state of the process. Which files must it read? (Multiple choice.)

A. Archive log file

B. Parameter file

C. Data files

D. Control Documents

正解：B,C,D 解答を投票する

出題：13

Which of the following about the multi-channel usage of Huawei OceanStor 9000 to SMB3 is correct?
(multiple choice)

A. If the client has a GE network port with the same type and number of ports, when the client uses SMB3 to access Huawei OceanStor 900, the client will establish multiple connection channels with Huawei OceanStor 9000

B. If the client has two or more GE and 10GE IB ports of the same type, after the SMB3 is applied, when one of them is disconnected from the network port, business will be interrupted.

C. Ifthe client has only one network port, you can not use the SMB3 function

D. The client must also support the SMB3.0 protocol

正解：A,D 解答を投票する

出題：14

In VMwarevirtualization environment, if the user wants to migrate a VM from one ESXi host to another with no downtime, (_) can be used for this; if the user wants to migrate virtual machine storage disk files to another storage array with no downtime, (_) can be used.

A. vMotion, Storage vMotion

B. Storage vMotion, Storage DRS

C. vMotion, Storage DRS

D. vMotion, HA

正解：A 解答を投票する

出題：15

An Engineer installed a OceanStor 9000 for a customer (a total of 5 OceanStor 9000 C Node, front and rear endsare 10GE TOE networking, on-site installation TOE network card). Then connected the signal lines, power lines, and debugged the software. During the installation there were issues. Which of the following description of these issues are correct? (Multiplechoice.)

A. Label NODE 01 A0-0 The signal cable is inserted in the network port A0-1. The signal cable labeled NODE01 B3-1 is inserted in the network position B3-0, due to the same network card two network port peer, you can place the wrongline, you cannot adjust.

B. The signal cables are long and need to be strapped to the cabinet or placed on the bottom tray.

C. CE6850 switch connected to two stacked copper cables, one of which is needed to post-cold more cold, because it does not affect the network interoperability. You can base this software debugging.

D. 5 devices TOE NIC A0, B1, and A0, B3 inserted into the PCIe slot will not affect the system.
Deployment will not affect the network bandwidth, so it cannot be adjusted.

正解：B,C 解答を投票する

出題：16

Which description of the N8000 Clustered NAS file system snapshot features and their application is wrong?

A. Snapshot file system can be dedicated as a separate space to the client.

B. For a file system can create multiple snapshots, supportsnapshots of the snapshot

C. File System Snapshot Instantly copy the source file system completely available copy, when due to viruses or man-made misuseand other causes of the original file system is not available, the rollback of the snapshot can restore the original file system.

D. Snapshot file system provides only read-only access to external, it cannot provide write operations

正解：D 解答を投票する

H13-629_V2.0試験無料問題集「Huawei HCIE-Storage (Written) V2.0 認定」