070-659試験無料問題集「Microsoft TS: Windows Server 2008 R2, Server Virtualization 認定」
You have a Windows Server 2008 R2 Hyper-V server with a single network adaptor that is connected to a virtual network.
The virtual network is configured as External. Virtual machines (VMs) running on the server are not able to communicate with the host server over the network.
You need to ensure that VMs running on the server are able to communicate with the host server over the network.
In Virtual Network Manager, what should you do?
The virtual network is configured as External. Virtual machines (VMs) running on the server are not able to communicate with the host server over the network.
You need to ensure that VMs running on the server are able to communicate with the host server over the network.
In Virtual Network Manager, what should you do?
正解：C
解答を投票する
A company uses Windows Server 2008 R2 Domain Name System (DNS). You are configuring Remote Desktop (RD) Connection Broker load balancing. You add the necessary DNS entries for each RD Session Host server.
RD Connection Broker load balancing is not working.
You need to ensure that the Remote Desktop sessions are load-balanced across the RD Session Host server farm.
Which server option should you use? (To answer, select the appropriate setting or settings in the answer area.)
Point and Shoot:
RD Connection Broker load balancing is not working.
You need to ensure that the Remote Desktop sessions are load-balanced across the RD Session Host server farm.
Which server option should you use? (To answer, select the appropriate setting or settings in the answer area.)
Point and Shoot:
正解：
Explanation:
To load balance sessions in an RD Session Host server farm, you can use the RD Connection Broker Load
Balancing feature together with Domain Name System (DNS) round robin. To configure DNS, you must
create a DNS host resource record for each RD Session Host server in the farm that maps the RD Session
Host server's IP address to the RD Session Host server farm name in DNS.
The following procedure provides the steps to configure DNS on a Windows Server 2008 R2-based domain
controller.
You must be a member of the Domain Admins, Enterprise Admins, or the DnsAdmins group to
complete this procedure.
To add DNS entries for each RD Session Host server in the farm
Open the DNS snap-in. To open the DNS snap-in, log on to a computer where the DNS snap-in has been
installed, click Start, point to Administrative Tools, and then click DNS.
Expand the server name, expand Forward Lookup Zones, and then expand the domain name.
Right-click the appropriate zone, and then click New Host (A or AAAA).
In the Name (uses parent domain name if blank) box, type the RD Session Host server farm name.
The farm name is the virtual name that clients will use to connect to the RD Session Host server farm. Do
not use the name of an existing server. For management purposes, we recommend that you use the same
farm name that you specified when you configured the RD Session Host servers to join a farm in RD
Connection Broker.
In the IP address box, type the IP address of an RD Session Host server in the farm.
Click Add Host.
Repeat steps three through six for each RD Session Host server in the farm.
Important You must specify the same farm name in the Name (uses parent domain name if blank) box for each DNS entry.
For example, if you have three RD Session Host servers in a farm named FARM1, with IP addresses of 192.168.1.20, 192.168.1.21, and 192.168.1.22, the entries would look similar to the following:
Copy
Farm1
Host(A)
192.168.1.20
Farm1
Host(A)
192.168.1.21
Farm1
Host(A)
192.168.1.22
When you are finished, click Done. Note
By default, DNS round robin is enabled when using DNS on a Windows Server 2008 R2-based domain controller. The Enable round robin setting is available on the Advanced tab when you view the properties of the server in DNS.
http://technet.microsoft.com/en-us/library/cc772506.aspx
A company has a server that runs Windows Server 2008 R2 with Hyper-V. The Hyper-V server hosts several virtual machines (VMs). The disk configuration for the VMs is shown in the following table.
You are unable to perform an online backup of the VMs.
You need to ensure that you can perform online backups of the VMs.
Which two actions should you perform? (Each correct answer presents part of the solution. Choose two.)
You are unable to perform an online backup of the VMs.
You need to ensure that you can perform online backups of the VMs.
Which two actions should you perform? (Each correct answer presents part of the solution. Choose two.)
正解：D,E
解答を投票する
解説: (GoShiken メンバーにのみ表示されます)
You manage your virtual environment by using Microsoft System Center Virtual Machine Manager (VMM) 2008 R2.
You plan to install the VMM Self-Service Portal.
You need to install the prerequisite Web Server (IIS) role services.
Which two role services should you choose? (Each correct answer presents part of the solution. Choose two.)
You plan to install the VMM Self-Service Portal.
You need to install the prerequisite Web Server (IIS) role services.
Which two role services should you choose? (Each correct answer presents part of the solution. Choose two.)
正解：A,D
解答を投票する
解説: (GoShiken メンバーにのみ表示されます)
Your company has a Microsoft Hyper-V Server 2008 R2 environment. You manage the virtual environment by using Microsoft System Center Virtual Machine Manager (VMM) 2008 R2. You manage MAC addresses in Hyper-V by using the MinimumMacAddress and MaximumMacAddress registry keys.
The company is experiencing a high number of MAC address collisions.
You need to lower the number of collisions, provide room for growth, and lower the administration requirements for MAC addresses.
What should you do first?
The company is experiencing a high number of MAC address collisions.
You need to lower the number of collisions, provide room for growth, and lower the administration requirements for MAC addresses.
What should you do first?
正解：B
解答を投票する
解説: (GoShiken メンバーにのみ表示されます)