MS-203試験無料問題集「Microsoft 365 Messaging 認定」
You have a Microsoft Exchange Online tenant that uses an email domain named contoso.com.
You enable DKIM for contoso.com and create the required DNS CNAME record for the first key.
You need to create the second DNS CNAME record required to support DKIM, How should you complete the second DNS record? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
You enable DKIM for contoso.com and create the required DNS CNAME record for the first key.
You need to create the second DNS CNAME record required to support DKIM, How should you complete the second DNS record? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
正解：
You have a hybrid deployment between a Microsoft Exchange Online tenant and an on-premises Exchange Server 2019 server.
Users report that the email they send to external recipients is marked as spam.
You need to validate the Reverse DNS and Sender ID data for the on-premises server.
What should you use in the Microsoft Remote Connectivity Analyzer?
Users report that the email they send to external recipients is marked as spam.
You need to validate the Reverse DNS and Sender ID data for the on-premises server.
What should you use in the Microsoft Remote Connectivity Analyzer?
正解：D
解答を投票する
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
Your company has a Microsoft Exchange Server 2019 hybrid deployment that contains two Mailbox servers named MBX1 and MBX2.
The company has the departments shown in the following table.
From the on-premises organization, outbound email is sent directly to the Internet by using DNS lookups.
You are informed that some sales department users send email messages that are identified as spam.
You need to automatically block the sales department users from repeatedly sending spam.
Solution: You run the Install-AntispamAgents.psl PowerShell script on the MBX1 Mailbox server.
Does this meet the goal?
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
Your company has a Microsoft Exchange Server 2019 hybrid deployment that contains two Mailbox servers named MBX1 and MBX2.
The company has the departments shown in the following table.
From the on-premises organization, outbound email is sent directly to the Internet by using DNS lookups.
You are informed that some sales department users send email messages that are identified as spam.
You need to automatically block the sales department users from repeatedly sending spam.
Solution: You run the Install-AntispamAgents.psl PowerShell script on the MBX1 Mailbox server.
Does this meet the goal?
正解：A
解答を投票する
解説: (GoShiken メンバーにのみ表示されます)
You have a Microsoft Exchange Online tenant.
Users use Microsoft Outlook as their primary email client.
The users report that email messages received from a partner company are often delayed before being delivered.
You need to analyze the message header of one of the delayed messages to identify the cause of the delay.
What are two actions that you can perform? Each correct answer presents a complete solution.
NOTE: Each correct selection is worth one point.
Users use Microsoft Outlook as their primary email client.
The users report that email messages received from a partner company are often delayed before being delivered.
You need to analyze the message header of one of the delayed messages to identify the cause of the delay.
What are two actions that you can perform? Each correct answer presents a complete solution.
NOTE: Each correct selection is worth one point.
正解：B,C
解答を投票する
Please wait while the virtual machine loads. Once loaded, you may proceed to the lab section. This may take a few minutes, and the wait time will not be deducted from your overall test time.
When the Next button is available, click it to access the lab section. In this section, you will perform a set of tasks in a live environment. While most functionality will be available to you as it would be in a live environment, some functionality (e.g., copy and paste, ability to navigate to external websites) will not be possible by design.
Scoring is based on the outcome of performing the tasks stated in the lab. In other words, it doesn't matter how you accomplish the task, if you successfully perform it, you will earn credit for that task.
Labs are not timed separately, and this exam may have more than one lab that you must complete. You can use as much time as you would like to complete each lab. But, you should manage your time appropriately to ensure that you are able to complete the lab(s) and all other sections of the exam in the time provided.
Please note that once you submit your work by clicking the Next button within a lab, you will NOT be able to return to the lab.
Use the following login credentials as needed:
To enter your username, place your cursor in the Sign in box and click on the username below.
To enter your password, place your cursor in the Enter password box and click on the password below.
Microsoft 365 Username: [email protected]
Microsoft 365 Password: xxxxxx
If the Microsoft 365 portal does not load successfully in the browser, press CTRL-K to reload the portal in a new browser tab.
The following information is for technical support purposes only.
Lab Instance: XXXXXX
You need to reduce the likelihood that malicious links contained in emails received by mailboxes in @lab.CloudCredential(1).TenantName are opened.
To complete this task, sign in to the Exchange admin center.
When the Next button is available, click it to access the lab section. In this section, you will perform a set of tasks in a live environment. While most functionality will be available to you as it would be in a live environment, some functionality (e.g., copy and paste, ability to navigate to external websites) will not be possible by design.
Scoring is based on the outcome of performing the tasks stated in the lab. In other words, it doesn't matter how you accomplish the task, if you successfully perform it, you will earn credit for that task.
Labs are not timed separately, and this exam may have more than one lab that you must complete. You can use as much time as you would like to complete each lab. But, you should manage your time appropriately to ensure that you are able to complete the lab(s) and all other sections of the exam in the time provided.
Please note that once you submit your work by clicking the Next button within a lab, you will NOT be able to return to the lab.
Use the following login credentials as needed:
To enter your username, place your cursor in the Sign in box and click on the username below.
To enter your password, place your cursor in the Enter password box and click on the password below.
Microsoft 365 Username: [email protected]
Microsoft 365 Password: xxxxxx
If the Microsoft 365 portal does not load successfully in the browser, press CTRL-K to reload the portal in a new browser tab.
The following information is for technical support purposes only.
Lab Instance: XXXXXX
You need to reduce the likelihood that malicious links contained in emails received by mailboxes in @lab.CloudCredential(1).TenantName are opened.
To complete this task, sign in to the Exchange admin center.
正解：
See explanation below
Explanation:
Navigate to the Exchange Admin Center, and then choose the Advanced Threats section of the EAC.
Click the Safe Links tab to examine all existing Safe Links policies:
After navigating to the Safe Links policy page, choose the Add button (+) to create a new policy. The New Safe Links Policy window opens.
- In the resulting window we'll be presented with the options available for creating our new Safe Links policy.
In Name enter an appropriate, unique, name that describes this policy. In the description enter some text that provides a little more detail for anyone trying to make sense of the options selected here.
Next we'll choose the action to take for URLs. We can leave this Off, if for example we are creating a policy to exclude a group of users that would otherwise be affected by another Safe Links policy.
The checkbox Do not track user click can be selected if you do not wish to use the reporting functionality available at a later date. This is a key feature when understanding which users clicked a link that was later found to be a threat, so be careful about choosing to disable user click tracking.
Our final check box provides options for click-through is a link is found to be dangerous. In some circumstances you may trust users to click-through links, or they may request the ability to do so. In most circumstances you will not want a user to click-through the malicious link.
Some URLs, such as those for internal addresses or even trusted partners, may not require re-writing. Enter these URLs here.
Finally, we will select the scope for the rule under the Applied to section.
Using similar conditions to transport rules we can select who this rule applies to including:
- Individual recipients
- Recipient domains
- Members of distribution groups
The same conditions can be used for exceptions. When you have configured your rule, choose Save.
After saving the new Safe Links rule it will be shown in the EAC list. Just like Transport Rules, you can use the Enabled column to enable or disable the Safe Links policy.
Reference:
https://techgenix.com/implementing-exchange-online-advanced-threat-protection-part2/
Explanation:
Navigate to the Exchange Admin Center, and then choose the Advanced Threats section of the EAC.
Click the Safe Links tab to examine all existing Safe Links policies:
After navigating to the Safe Links policy page, choose the Add button (+) to create a new policy. The New Safe Links Policy window opens.
- In the resulting window we'll be presented with the options available for creating our new Safe Links policy.
In Name enter an appropriate, unique, name that describes this policy. In the description enter some text that provides a little more detail for anyone trying to make sense of the options selected here.
Next we'll choose the action to take for URLs. We can leave this Off, if for example we are creating a policy to exclude a group of users that would otherwise be affected by another Safe Links policy.
The checkbox Do not track user click can be selected if you do not wish to use the reporting functionality available at a later date. This is a key feature when understanding which users clicked a link that was later found to be a threat, so be careful about choosing to disable user click tracking.
Our final check box provides options for click-through is a link is found to be dangerous. In some circumstances you may trust users to click-through links, or they may request the ability to do so. In most circumstances you will not want a user to click-through the malicious link.
Some URLs, such as those for internal addresses or even trusted partners, may not require re-writing. Enter these URLs here.
Finally, we will select the scope for the rule under the Applied to section.
Using similar conditions to transport rules we can select who this rule applies to including:
- Individual recipients
- Recipient domains
- Members of distribution groups
The same conditions can be used for exceptions. When you have configured your rule, choose Save.
After saving the new Safe Links rule it will be shown in the EAC list. Just like Transport Rules, you can use the Enabled column to enable or disable the Safe Links policy.
Reference:
https://techgenix.com/implementing-exchange-online-advanced-threat-protection-part2/
You have a Microsoft Exchange Online tenant named contoso.com.
The Exchange configuration contains the following public folder hierarchy:
- Support
- Messages
- Calendar
You create a distribution list named [email protected].
You need to add the Messages public folder to the HelpDesk distribution list.
What should you do first?
The Exchange configuration contains the following public folder hierarchy:
- Support
- Messages
- Calendar
You create a distribution list named [email protected].
You need to add the Messages public folder to the HelpDesk distribution list.
What should you do first?
正解：B
解答を投票する
解説: (GoShiken メンバーにのみ表示されます)
You have a Microsoft Exchange Online tenant.
You need to add a custom domain named contoso.com that meets the following requirements:
+ All email messages from the intemet must first be filtered by a third-party cloud service before being delivered to Exchange Online.
+ Recipient email systems must validate the messaging server for contoso.com) Which type of DNS record should you use for each requirement? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
You need to add a custom domain named contoso.com that meets the following requirements:
+ All email messages from the intemet must first be filtered by a third-party cloud service before being delivered to Exchange Online.
+ Recipient email systems must validate the messaging server for contoso.com) Which type of DNS record should you use for each requirement? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
正解：
You need to perform a remote wipe of the devices of User2 and User3.
You run the following commands.
Clear-MobileDevice -id User2-Device
-NotificationEmailAddress "[email protected]"
Clear-MobileDevice -id User3-Device
-NotificationEmailAddress "[email protected]"
What occurs on each device? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
You run the following commands.
Clear-MobileDevice -id User2-Device
-NotificationEmailAddress "[email protected]"
Clear-MobileDevice -id User3-Device
-NotificationEmailAddress "[email protected]"
What occurs on each device? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
正解：
Reference:
https://docs.microsoft.com/en-us/exchange/clients/exchange-activesync/remote-wipe?view=exchserver-2019
Topic 4, ADatum Corporation
Overview
This is a case study. Case studies are not timed separately. You can use as much exam time as you would like to complete each case. However, there may be additional case studies and sections on this exam. You must manage your time to ensure that you are able to complete all questions included on this exam in the time provided.
To answer the questions included in a case study, you will need to reference information that is provided in the case study. Case studies might contain exhibits and other resources that provide more information about the scenario that is described in the case study. Each question is independent of the other questions in this case study.
At the end of this case study, a review screen will appear. This screen allows you to review your answers and to make changes before you move to the next section of the exam. After you begin a new section, you cannot return to this section.
To start the case study
To display the first question in this case study, click the Next button. Use the buttons in the left pane to explore the content of the case study before you answer the questions. Clicking these buttons displays information such as business requirements, existing environment, and problem statements. If the case study has an All Information tab, note that the information displayed is identical to the information displayed on the subsequent tabs. When you are ready to answer a question, click the Question button to return to the question.
Overview
Company Information
ADatum Corporation is a consulting company that has a main office in Montreal.
ADatum has a Microsoft 365 E5 tenant named adatum.com and uses Microsoft Exchange Online for messaging services.
Existing Environment
Mailboxes
Public Folder Mailboxes
Rules
Connectors
Safe Attachments Policies
Groups
Group Membership
Contacts
Allan Deyoung Role Assignments and Mailbox Details
Organization Sharing
Roles
Outlook Web App Policies
Mobile Device Mailbox Policies
You have a Microsoft Exchange Server 2019 organization that uses an email domain named contoso.com.
You plan to move several mailboxes to Microsoft 365.
You need to configure hybrid mail flow to meet the following requirements:
All email messages received from the internet must be filtered for spam by Microsoft 365.
Your company's on-premises firewall must allow email messages between the on-premises Exchange servers and Microsoft 365.
What should you configure? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
You plan to move several mailboxes to Microsoft 365.
You need to configure hybrid mail flow to meet the following requirements:
All email messages received from the internet must be filtered for spam by Microsoft 365.
Your company's on-premises firewall must allow email messages between the on-premises Exchange servers and Microsoft 365.
What should you configure? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
正解：
Reference:
https://docs.microsoft.com/en-us/exchange/hybrid-deployment-prerequisites
You have a Microsoft 365 subscription for a company named Fabrikam,Inc. The company uses an Exchange Online tenant that has an email domain named fabirkam.com.
Fabrikam works with a partner company Contoso, Ltd. that uses an email domain named contoso.com.
A new security policy at Contoso states that any email sent from partners to Contoso employees must use TLS encryption.
You need to ensure that email sent from Fabrikam to Contoso uses TLS.
What should you create in the tenant?
Fabrikam works with a partner company Contoso, Ltd. that uses an email domain named contoso.com.
A new security policy at Contoso states that any email sent from partners to Contoso employees must use TLS encryption.
You need to ensure that email sent from Fabrikam to Contoso uses TLS.
What should you create in the tenant?
正解：D
解答を投票する
解説: (GoShiken メンバーにのみ表示されます)
Your company has a Microsoft Exchange Server 2019 organization.
You are auditing the Litigation Hold on the mailboxes of the company's research and development department.
You discover that the mailbox of a user named User1 has a Litigation Hold enabled.
You need to discover who placed the Litigation Hold on the mailbox of User1, and when the Litigation Hold was enabled.
Which two actions should you perform? Each correct answer presents part of the solution.
NOTE: Each correct selection is worth one point.
You are auditing the Litigation Hold on the mailboxes of the company's research and development department.
You discover that the mailbox of a user named User1 has a Litigation Hold enabled.
You need to discover who placed the Litigation Hold on the mailbox of User1, and when the Litigation Hold was enabled.
Which two actions should you perform? Each correct answer presents part of the solution.
NOTE: Each correct selection is worth one point.
正解：A,D
解答を投票する
解説: (GoShiken メンバーにのみ表示されます)