C_S4CPB試験無料問題集「SAP Certified - Implementation Consultant - SAP S/4HANA Cloud Public Edition (C_S4CPB_2602) 認定」
SIMULATION
Create a Custom Business Role with Restrictions
Business Scenario:
You are building a custom business role with restrictions to ensure the end users assigned the role have only the minimum level of access necessary to complete their core job tasks. The end users are project managers based in the United States. They should only be able to create projects, edit projects, and access projects that are occurring in the United States. They should not be able to staff any resources outside of the United States. Write, Read, and Value Help access should be restricted to only the United States for all relevant fields.
Prerequisites:
Note: In the task below, always replace ###### with the last 6 digits of your group number.
Note: Make sure to use the EXACT names/values/spaces as they are listed in the task. Even forgetting a space or a number will cause the validation of the task to fail and be marked as incorrect.
Task:
Use the template for the business role Project Manager - Professional Services (SAP_BR_PROJECT_MANAGER_PROF) to create a new business role with the following information:
Create a Custom Business Role with Restrictions
Business Scenario:
You are building a custom business role with restrictions to ensure the end users assigned the role have only the minimum level of access necessary to complete their core job tasks. The end users are project managers based in the United States. They should only be able to create projects, edit projects, and access projects that are occurring in the United States. They should not be able to staff any resources outside of the United States. Write, Read, and Value Help access should be restricted to only the United States for all relevant fields.
Prerequisites:
Note: In the task below, always replace ###### with the last 6 digits of your group number.
Note: Make sure to use the EXACT names/values/spaces as they are listed in the task. Even forgetting a space or a number will cause the validation of the task to fail and be marked as incorrect.
Task:
Use the template for the business role Project Manager - Professional Services (SAP_BR_PROJECT_MANAGER_PROF) to create a new business role with the following information:
正解：
See Explanation below for all solution
Explanation:
Objective
The purpose of this task is to create a custom business role for project managers in the United States by using the standard SAP template role Project Manager - Professional Services and then restricting the role so users only have the minimum access needed for their job.
The template role used is:
Template Business Role ID: SAP_BR_PROJECT_MANAGER_PROF
Template Business Role Description: Project Manager - Professional Services The new custom role must be created with exact values defined in the task.
Business Scenario Explanation
In this simulation, you are building a restricted custom role for project managers who work only in the United States.
The goal is to ensure that these end users:
can create and edit projects,
can access only projects occurring in the United States,
cannot work with projects or staffing outside the US,
have only the minimum level of authorization needed.
This is done in two major parts:
Create a new custom business role from the standard SAP template
Restrict the role values so only US-related data is allowed
Important Notes
Always replace ###### with the last 6 digits of your group number.
Every value must be entered exactly as shown.
Even one missing space or incorrect character can cause the simulation validation to fail.
You must also create and assign a launchpad space as part of the custom role creation.
Required Values for Role Creation
Use the following values exactly as shown in the task image.
Parameter
Value
New Business Role ID
BR_PROJECT_MANAGER_PROF_US_######
New Business Role Description
Project Manager - Professional Services - US - ######
Option for Launchpad Spaces
Create and Assign Spaces Based on Space Templates
New Space ID
ZBR_PROJECT_MANAGER_PROF_US_######
Activate IAM Apps
Yes (check the box)
Example
If your suffix is 000457, the values become:
BR_PROJECT_MANAGER_PROF_US_000457
Project Manager - Professional Services - US - 000457
ZBR_PROJECT_MANAGER_PROF_US_000457
Detailed Step-by-Step Procedure
Part 1: Open the standard template role
Step 1: Open the app "Maintain Business Roles"
From the SAP S/4HANA Cloud launchpad:
Log in to SAP S/4HANA Cloud.
Use the app search.
Search for:
Maintain Business Roles
Open the app.
Explanation:
This app is used to maintain standard and custom business roles.
Because this task requires creating a custom role from an existing template, this is the correct starting app.
Step 2: Search for the template role
Inside Maintain Business Roles:
In the search/filter area, search for:
SAP_BR_PROJECT_MANAGER_PROF
or
Project Manager - Professional Services
Open the standard SAP template role.
Explanation:
You must start from the standard template role because the task explicitly says to use the template for:
Project Manager - Professional Services
SAP_BR_PROJECT_MANAGER_PROF
Part 2: Create the custom role from the template
Step 3: Click "Create Derived Business Role"
On the template role page:
Click:
Create Derived Business Role
Explanation:
This function creates a customer-specific copy based on the standard SAP business role template.
It preserves the delivered role content but allows you to define your own role ID, description, restrictions, and launchpad space.
Step 4: Enter the custom role information
In the creation popup, enter the values exactly as follows:
Template = SAP_BR_PROJECT_MANAGER_PROF
New Business Role ID = BR_PROJECT_MANAGER_PROF_US_######
New Business Role Description = Project Manager - Professional Services - US - ###### Option for Launchpad Spaces = Create and Assign Spaces Based on Space Templates New Space ID = ZBR_PROJECT_MANAGER_PROF_US_###### Activate IAM Apps = checked Explanation:
These values define the new custom project manager role that will later be restricted to US-only access.
The space option is important because the task expects the role to include its own launchpad space.
Step 5: Confirm creation
Click OK
Explanation:
SAP now creates the custom role derived from the template and assigns the new launchpad space at the same time.
Part 3: Verify the newly created custom role
Step 6: Review the new custom role
After creation, SAP opens the new custom role.
Verify:
Business Role ID = BR_PROJECT_MANAGER_PROF_US_######
Business Role Description = Project Manager - Professional Services - US - ###### Business Role Template ID = SAP_BR_PROJECT_MANAGER_PROF Explanation:
This confirms the derived role was created correctly from the right SAP template.
Part 4: Maintain role restrictions
Step 7: Open "Maintain Restrictions"
On the custom role page:
Click:
Maintain Restrictions
Explanation:
This is the most important part of the task.
You are not only creating a role - you are also limiting the role so it only allows US-related values.
Step 8: Understand the rule for restriction maintenance
The PDF/task logic is:
Fields explicitly listed in the restriction table → keep them Restricted and enter the required values All other fields not listed in the task table → set them to Not Maintained Explanation:
This is essential.
If extra fields remain restricted or blank, the role may not validate correctly.
The safest approach is:
only maintain the required fields,
mark all unrelated fields as Not Maintained.
Part 5: Enter the required US restrictions
From your exercise run, the maintained values included restrictions such as:
Keep these kinds of fields restricted with US/1710 values where required Examples from your run:
Bank Country/Region Key
Read, Value Help = US
Value Help = US
Company Code
use 1710 only where the task table explicitly requires it
Purchasing Organization
use 1710 where required
Valuation Area
use 1710 where required
Explanation:
These are the exact business restrictions that make the role usable only for the intended geography and business scope.
Step 9: Set unrelated restriction fields to "Not Maintained"
For every field not included in the task's restriction list, choose:
Not Maintained
Examples from your screenshots included fields like:
Accounting Principle
Authorization Group for Business Partners
Billing Type
These should be Not Maintained unless they are explicitly listed in the task's required restriction table.
Explanation:
This removes unnecessary access and matches the task wording that all other fields should be set to Not Maintained.
Step 10: Save the restrictions
After all required values are entered and unrelated fields are marked Not Maintained:
Click Save
Explanation:
This saves the restriction profile of the role.
If you do not save here, the role will remain incomplete or in draft.
Part 6: Verify launchpad space and page creation
Step 11: Go to Launchpad Spaces
In the custom role:
Open the tab:
Launchpad Spaces
Verify that the assigned space exists:
ZBR_PROJECT_MANAGER_PROF_US_######
Explanation:
Because you selected Create and Assign Spaces Based on Space Templates, SAP should have created and assigned the launchpad space automatically.
Step 12: Verify the created space
Open the assigned space and confirm:
the custom space exists,
it is customer-managed,
the pages are assigned correctly.
Explanation:
This proves that the new business role has its own launchpad structure as required by the task.
Expected Result
After this task is completed successfully:
a new custom role exists based on SAP_BR_PROJECT_MANAGER_PROF,
the role uses the exact required ID and description,
the role has a custom launchpad space,
IAM apps are activated,
restrictions are maintained for US-only access,
all irrelevant fields are set to Not Maintained,
the role is saved successfully.
Explanation:
Objective
The purpose of this task is to create a custom business role for project managers in the United States by using the standard SAP template role Project Manager - Professional Services and then restricting the role so users only have the minimum access needed for their job.
The template role used is:
Template Business Role ID: SAP_BR_PROJECT_MANAGER_PROF
Template Business Role Description: Project Manager - Professional Services The new custom role must be created with exact values defined in the task.
Business Scenario Explanation
In this simulation, you are building a restricted custom role for project managers who work only in the United States.
The goal is to ensure that these end users:
can create and edit projects,
can access only projects occurring in the United States,
cannot work with projects or staffing outside the US,
have only the minimum level of authorization needed.
This is done in two major parts:
Create a new custom business role from the standard SAP template
Restrict the role values so only US-related data is allowed
Important Notes
Always replace ###### with the last 6 digits of your group number.
Every value must be entered exactly as shown.
Even one missing space or incorrect character can cause the simulation validation to fail.
You must also create and assign a launchpad space as part of the custom role creation.
Required Values for Role Creation
Use the following values exactly as shown in the task image.
Parameter
Value
New Business Role ID
BR_PROJECT_MANAGER_PROF_US_######
New Business Role Description
Project Manager - Professional Services - US - ######
Option for Launchpad Spaces
Create and Assign Spaces Based on Space Templates
New Space ID
ZBR_PROJECT_MANAGER_PROF_US_######
Activate IAM Apps
Yes (check the box)
Example
If your suffix is 000457, the values become:
BR_PROJECT_MANAGER_PROF_US_000457
Project Manager - Professional Services - US - 000457
ZBR_PROJECT_MANAGER_PROF_US_000457
Detailed Step-by-Step Procedure
Part 1: Open the standard template role
Step 1: Open the app "Maintain Business Roles"
From the SAP S/4HANA Cloud launchpad:
Log in to SAP S/4HANA Cloud.
Use the app search.
Search for:
Maintain Business Roles
Open the app.
Explanation:
This app is used to maintain standard and custom business roles.
Because this task requires creating a custom role from an existing template, this is the correct starting app.
Step 2: Search for the template role
Inside Maintain Business Roles:
In the search/filter area, search for:
SAP_BR_PROJECT_MANAGER_PROF
or
Project Manager - Professional Services
Open the standard SAP template role.
Explanation:
You must start from the standard template role because the task explicitly says to use the template for:
Project Manager - Professional Services
SAP_BR_PROJECT_MANAGER_PROF
Part 2: Create the custom role from the template
Step 3: Click "Create Derived Business Role"
On the template role page:
Click:
Create Derived Business Role
Explanation:
This function creates a customer-specific copy based on the standard SAP business role template.
It preserves the delivered role content but allows you to define your own role ID, description, restrictions, and launchpad space.
Step 4: Enter the custom role information
In the creation popup, enter the values exactly as follows:
Template = SAP_BR_PROJECT_MANAGER_PROF
New Business Role ID = BR_PROJECT_MANAGER_PROF_US_######
New Business Role Description = Project Manager - Professional Services - US - ###### Option for Launchpad Spaces = Create and Assign Spaces Based on Space Templates New Space ID = ZBR_PROJECT_MANAGER_PROF_US_###### Activate IAM Apps = checked Explanation:
These values define the new custom project manager role that will later be restricted to US-only access.
The space option is important because the task expects the role to include its own launchpad space.
Step 5: Confirm creation
Click OK
Explanation:
SAP now creates the custom role derived from the template and assigns the new launchpad space at the same time.
Part 3: Verify the newly created custom role
Step 6: Review the new custom role
After creation, SAP opens the new custom role.
Verify:
Business Role ID = BR_PROJECT_MANAGER_PROF_US_######
Business Role Description = Project Manager - Professional Services - US - ###### Business Role Template ID = SAP_BR_PROJECT_MANAGER_PROF Explanation:
This confirms the derived role was created correctly from the right SAP template.
Part 4: Maintain role restrictions
Step 7: Open "Maintain Restrictions"
On the custom role page:
Click:
Maintain Restrictions
Explanation:
This is the most important part of the task.
You are not only creating a role - you are also limiting the role so it only allows US-related values.
Step 8: Understand the rule for restriction maintenance
The PDF/task logic is:
Fields explicitly listed in the restriction table → keep them Restricted and enter the required values All other fields not listed in the task table → set them to Not Maintained Explanation:
This is essential.
If extra fields remain restricted or blank, the role may not validate correctly.
The safest approach is:
only maintain the required fields,
mark all unrelated fields as Not Maintained.
Part 5: Enter the required US restrictions
From your exercise run, the maintained values included restrictions such as:
Keep these kinds of fields restricted with US/1710 values where required Examples from your run:
Bank Country/Region Key
Read, Value Help = US
Value Help = US
Company Code
use 1710 only where the task table explicitly requires it
Purchasing Organization
use 1710 where required
Valuation Area
use 1710 where required
Explanation:
These are the exact business restrictions that make the role usable only for the intended geography and business scope.
Step 9: Set unrelated restriction fields to "Not Maintained"
For every field not included in the task's restriction list, choose:
Not Maintained
Examples from your screenshots included fields like:
Accounting Principle
Authorization Group for Business Partners
Billing Type
These should be Not Maintained unless they are explicitly listed in the task's required restriction table.
Explanation:
This removes unnecessary access and matches the task wording that all other fields should be set to Not Maintained.
Step 10: Save the restrictions
After all required values are entered and unrelated fields are marked Not Maintained:
Click Save
Explanation:
This saves the restriction profile of the role.
If you do not save here, the role will remain incomplete or in draft.
Part 6: Verify launchpad space and page creation
Step 11: Go to Launchpad Spaces
In the custom role:
Open the tab:
Launchpad Spaces
Verify that the assigned space exists:
ZBR_PROJECT_MANAGER_PROF_US_######
Explanation:
Because you selected Create and Assign Spaces Based on Space Templates, SAP should have created and assigned the launchpad space automatically.
Step 12: Verify the created space
Open the assigned space and confirm:
the custom space exists,
it is customer-managed,
the pages are assigned correctly.
Explanation:
This proves that the new business role has its own launchpad structure as required by the task.
Expected Result
After this task is completed successfully:
a new custom role exists based on SAP_BR_PROJECT_MANAGER_PROF,
the role uses the exact required ID and description,
the role has a custom launchpad space,
IAM apps are activated,
restrictions are maintained for US-only access,
all irrelevant fields are set to Not Maintained,
the role is saved successfully.
SIMULATION
Set up an Integration Scenario
Business Scenario
You are responsible for setting up the Bank Integration with File Interface (1EG). During an actual implementation, you would first download the Set-up Instructions for the business process from SAP Signavio Process Navigator. In this practical exam, all the information will be provided to you, so you do not need to download the Set-up Instructions.
Prerequisites
Note:
In the task below, always replace ###### with the last 6 digits of your group number.
Note:
Make sure to use the EXACT names/values/spaces as they are listed in the task. Even forgetting a space or a number will cause the validation of the task to fail and be marked as incorrect.
Your Task
Create a Communication Arrangement for Finance - Account Receivable Bank Statement Integration with the information below and save.
Set up an Integration Scenario
Business Scenario
You are responsible for setting up the Bank Integration with File Interface (1EG). During an actual implementation, you would first download the Set-up Instructions for the business process from SAP Signavio Process Navigator. In this practical exam, all the information will be provided to you, so you do not need to download the Set-up Instructions.
Prerequisites
Note:
In the task below, always replace ###### with the last 6 digits of your group number.
Note:
Make sure to use the EXACT names/values/spaces as they are listed in the task. Even forgetting a space or a number will cause the validation of the task to fail and be marked as incorrect.
Your Task
Create a Communication Arrangement for Finance - Account Receivable Bank Statement Integration with the information below and save.
正解：
See Explanation below for all solution
Explanation:
Objective
The purpose of this task is to create a Communication Arrangement for the bank integration scenario using the communication system created in the previous task.
The required scenario is:
Scenario ID: SAP_COM_0316
Scenario Description: Finance - Account Receivable Bank Statement Integration This is the final configuration step in the integration scenario setup sequence.
Business Scenario Explanation
In the previous tasks, you created:
a Communication User
a Communication System
Now you must create the Communication Arrangement that links the communication scenario to the communication system.
In SAP S/4HANA Cloud, the communication arrangement defines:
which communication scenario is used,
which communication system is connected,
which inbound/outbound services are active,
and which technical settings are applied for the integration.
For this task, the communication arrangement is used for:
Finance - Account Receivable Bank Statement Integration
Scenario: SAP_COM_0316
Important Notes
Always replace ###### with the last 6 digits of your group number.
Use the exact values provided.
Do not change spaces, underscores, or capitalization.
The communication system selected must be the one created in Task 14:
1EG_SYSTEM_######
Required Values
Use the following values exactly as shown in the task image.
Example
If your suffix is 000013, then the values become:
Scenario = SAP_COM_0316
Arrangement Name = SAP_COM_0316_000013
Communication System = 1EG_SYSTEM_000013
Step 1: Open the app "Communication Arrangements"
From the SAP S/4HANA Cloud launchpad:
Log in to SAP S/4HANA Cloud.
Use the search bar or app finder.
Search for:
Communication Arrangements
Open the app.
Explanation:
This app is used to create and maintain communication arrangements for SAP communication scenarios.
Because the task explicitly asks to create a communication arrangement, this is the correct starting point.
Step 2: Start creating a new communication arrangement
Inside the Communication Arrangements app:
Click:
New
Explanation:
This starts the creation wizard for a new communication arrangement.
Step 3: Enter the communication scenario
In the Scenario field, enter:
SAP_COM_0316
Then confirm or continue.
Explanation:
This is the required SAP communication scenario for:
Finance - Account Receivable Bank Statement Integration
It is critical to use the exact scenario ID because the arrangement configuration is generated from this selection.
Step 4: Continue to the arrangement creation screen
After selecting the scenario:
Click Create
or
Click Continue
depending on the screen behavior.
Explanation:
This opens the detailed arrangement creation screen where the arrangement name and communication system are maintained.
Step 5: Enter the Arrangement Name
In the Arrangement Name field, enter:
SAP_COM_0316_######
Example
If your suffix is 000013, enter:
SAP_COM_0316_000013
Explanation:
This is the technical/business name of the communication arrangement and must match the task exactly.
Step 6: Select the previously created Communication System
In the Communication System field:
Open the value help or selection list.
Select the communication system created in the previous task:
1EG_SYSTEM_######
Example
If your suffix is 000013, select:
1EG_SYSTEM_000013
Explanation:
This step links the communication arrangement to the communication system that contains:
the technical host definition,
the communication user assignment,
and the inbound communication settings.
Without this link, the arrangement is incomplete.
Step 7: Review the automatically derived communication details
After selecting the communication system, SAP may automatically populate integration-related sections such as:
inbound communication user
authentication method
service endpoints
service URLs
Explanation:
These values are normally derived automatically from the selected communication scenario and communication system.
You usually do not need to manually change them unless the task explicitly requires it.
Step 8: Review all required values
Before saving, verify:
Scenario = SAP_COM_0316
Arrangement Name = SAP_COM_0316_######
Communication System = 1EG_SYSTEM_######
Explanation:
This final review ensures there are no typing errors or wrong system selections.
Step 9: Save the Communication Arrangement
Click:
Save
Explanation:
This finalizes the communication arrangement creation.
Without saving, the configuration does not exist and the integration setup is incomplete.
Step 10: Verify the saved arrangement
After saving, confirm that the arrangement shows:
Arrangement Name = SAP_COM_0316_######
Communication System = 1EG_SYSTEM_######
Scenario = SAP_COM_0316
scenario description:
Finance - Account Receivable Bank Statement Integration
Explanation:
This is the confirmation that the communication arrangement was created successfully and is ready for later use in the bank integration scenario.
Expected Result
After this task is completed successfully:
the communication arrangement exists,
it uses scenario SAP_COM_0316,
it has the correct arrangement name,
it is linked to the previously created communication system,
the arrangement is saved successfully.
Explanation:
Objective
The purpose of this task is to create a Communication Arrangement for the bank integration scenario using the communication system created in the previous task.
The required scenario is:
Scenario ID: SAP_COM_0316
Scenario Description: Finance - Account Receivable Bank Statement Integration This is the final configuration step in the integration scenario setup sequence.
Business Scenario Explanation
In the previous tasks, you created:
a Communication User
a Communication System
Now you must create the Communication Arrangement that links the communication scenario to the communication system.
In SAP S/4HANA Cloud, the communication arrangement defines:
which communication scenario is used,
which communication system is connected,
which inbound/outbound services are active,
and which technical settings are applied for the integration.
For this task, the communication arrangement is used for:
Finance - Account Receivable Bank Statement Integration
Scenario: SAP_COM_0316
Important Notes
Always replace ###### with the last 6 digits of your group number.
Use the exact values provided.
Do not change spaces, underscores, or capitalization.
The communication system selected must be the one created in Task 14:
1EG_SYSTEM_######
Required Values
Use the following values exactly as shown in the task image.
Example
If your suffix is 000013, then the values become:
Scenario = SAP_COM_0316
Arrangement Name = SAP_COM_0316_000013
Communication System = 1EG_SYSTEM_000013
Step 1: Open the app "Communication Arrangements"
From the SAP S/4HANA Cloud launchpad:
Log in to SAP S/4HANA Cloud.
Use the search bar or app finder.
Search for:
Communication Arrangements
Open the app.
Explanation:
This app is used to create and maintain communication arrangements for SAP communication scenarios.
Because the task explicitly asks to create a communication arrangement, this is the correct starting point.
Step 2: Start creating a new communication arrangement
Inside the Communication Arrangements app:
Click:
New
Explanation:
This starts the creation wizard for a new communication arrangement.
Step 3: Enter the communication scenario
In the Scenario field, enter:
SAP_COM_0316
Then confirm or continue.
Explanation:
This is the required SAP communication scenario for:
Finance - Account Receivable Bank Statement Integration
It is critical to use the exact scenario ID because the arrangement configuration is generated from this selection.
Step 4: Continue to the arrangement creation screen
After selecting the scenario:
Click Create
or
Click Continue
depending on the screen behavior.
Explanation:
This opens the detailed arrangement creation screen where the arrangement name and communication system are maintained.
Step 5: Enter the Arrangement Name
In the Arrangement Name field, enter:
SAP_COM_0316_######
Example
If your suffix is 000013, enter:
SAP_COM_0316_000013
Explanation:
This is the technical/business name of the communication arrangement and must match the task exactly.
Step 6: Select the previously created Communication System
In the Communication System field:
Open the value help or selection list.
Select the communication system created in the previous task:
1EG_SYSTEM_######
Example
If your suffix is 000013, select:
1EG_SYSTEM_000013
Explanation:
This step links the communication arrangement to the communication system that contains:
the technical host definition,
the communication user assignment,
and the inbound communication settings.
Without this link, the arrangement is incomplete.
Step 7: Review the automatically derived communication details
After selecting the communication system, SAP may automatically populate integration-related sections such as:
inbound communication user
authentication method
service endpoints
service URLs
Explanation:
These values are normally derived automatically from the selected communication scenario and communication system.
You usually do not need to manually change them unless the task explicitly requires it.
Step 8: Review all required values
Before saving, verify:
Scenario = SAP_COM_0316
Arrangement Name = SAP_COM_0316_######
Communication System = 1EG_SYSTEM_######
Explanation:
This final review ensures there are no typing errors or wrong system selections.
Step 9: Save the Communication Arrangement
Click:
Save
Explanation:
This finalizes the communication arrangement creation.
Without saving, the configuration does not exist and the integration setup is incomplete.
Step 10: Verify the saved arrangement
After saving, confirm that the arrangement shows:
Arrangement Name = SAP_COM_0316_######
Communication System = 1EG_SYSTEM_######
Scenario = SAP_COM_0316
scenario description:
Finance - Account Receivable Bank Statement Integration
Explanation:
This is the confirmation that the communication arrangement was created successfully and is ready for later use in the bank integration scenario.
Expected Result
After this task is completed successfully:
the communication arrangement exists,
it uses scenario SAP_COM_0316,
it has the correct arrangement name,
it is linked to the previously created communication system,
the arrangement is saved successfully.