5V0-31.22試験無料問題集（145題）「VMware Cloud Foundation Specialist (v2) 認定」

出題：1

An administrator successfully finished restoring a SDDC Manager and now needs to verify its operation.
Which tool should the administrator use for this verification?

A. vRealize Operation plugin tool for VCF

B. Support and Serviceability (SoS) tool

C. Ruby vSphere Console VCF check tool

D. SDDC Manager GUI restore health tool

正解：B 解答を投票する

出題：2

An architect is designing overlay networking and routing for two VMware Cloud Foundation VI workload domains.
The following requirements must be met in the design:
- NSX-T Bare Metal Edge nodes are required to satisfy a requirement for extremely low latency.
- The costs must be kept to a minimum.
Which design meets these customer requirements?

A. Create separate NSX-T Manager clusters for each workload domain, and then create separate NSX-T Bare Metal Edge clusters for each workload domain.

B. Place the Bare Metal Edge nodes in the same rack as the management domain hosts, and then add the NSX-T Bare Metal Edge cluster to the management domain NSX-T Manager cluster.

C. Create separate NSX-T Manager clusters for each workload domain, and then create a single NSX-T Bare Metal Edge cluster to be shared between NSX-T Manager clusters.

D. Share an NSX-T Manager cluster between both workload domains, and then add the NSX-T Bare Metal Edge cluster to the shared NSX-T Manager cluster.

正解：D 解答を投票する

出題：3

Which two features are supported when implementing NSX Federation? (Choose two.)

A. DHCP dynamic binding

B. Identity Firewall

C. DHCP

D. NAT operations

E. Load Balancer

正解：C,D 解答を投票する

解説: (GoShiken メンバーにのみ表示されます)

出題：4

A VMware Cloud Foundation administrator created a Tanzu Namespace in one of the workload domains.
Which two functions related to permissions can be performed on the newly created Namespace?
(Choose two.)

A. Add permissions to users from vCenter Single Sign-On identity sources.

B. Add permissions to local vSphere with Tanzu users only.

C. Permissions can be set to either view or edit.

D. Add permissions only from the vSphere.local domain.

E. Add a custom role to create more granular permissions.

正解：A,C 解答を投票する

解説: (GoShiken メンバーにのみ表示されます)

出題：5

An administrator must configure the user authentication for a new VMware Cloud Foundation (VCF) deployment.
Where would the identity provider be configured to reach this goal?

A. SDDC Manager

B. Workspace ONE Access

C. vCenter Server

D. vRealize Suite Lifecycle Manager

正解：C 解答を投票する

解説: (GoShiken メンバーにのみ表示されます)

出題：6

A VCF architect collected the following requirements when designing the expansion of a new VI Workload Domain with twenty-four vSAN Ready nodes, each with a dual-port 25Gbps network interface card:
- Provide scalable high-performance networking with layer-3 termination at top-of-rack
- Protect workloads from switch/NIC failure
- Provide at-least 25Gbps dedicated bandwidth to backup traffic
- Easily accept workloads on traditional VLAN-backed networks
- Fully-supported by VMware
Which design consideration meets all of these requirements?

A. Utilizing a single dvSwitch:
- Install a second dual-port 25Gbps network adapter into all hosts.
- Add the new vmnics as uplinks for the existing dvSwitch.
- Create a dvPortgroup for Backup using only the vmnics from the new adapter.

B. Utilizing two dvSwitches:
- Install a second dual-port 25Gbps network adapter into all hosts.
- Create a new dvSwitch.
- Specify two uplinks using one vmnic from each adapter on both dvSwitches.
- Create a dvPortgroup for Backup on the second dvSwitch.

C. Utilizing a single dvSwitch:
- Create a dvPortgroup for Backup.
- Manually edit the dvPortgroup for Backup to only utilize the second 25Gbps uplink.

D. Utilizing two dvSwitches:
- Install a second dual-port 25Gbps network adapter into all hosts.
- Create a new dvSwitch using the two new vmnics as uplinks.
- Create a dvPortgroup for Backup on the second dvSwitch.

正解：B 解答を投票する

出題：7

A systems administrator has finished imaging hosts on the first cluster using an ESXi ISO.
Afterwards, the administrator configured the network and the VM network port group on the hosts.
Which service does the administrator need to configure to complete the initial configuration of all ESXi hosts?

A. RTSP

B. PTP-SSH

C. NTP

D. RTP

正解：C 解答を投票する

出題：8

An administrator is leveraging existing ESXi hosts to deploy a VMware Cloud Foundation (VCF) environment.
What are two of the minimum requirements for this deployment? (Choose two.)

A. Each host needs to have at least one available NIC.

B. Host's CPU needs to be on the Hardware Compatibility List.

C. Hosts should have a configured Virtual Distributed Switch.

D. Each host needs to have at least two available NICs.

E. A minimum of three VCF ready-nodes are required.

正解：B,D 解答を投票する

解説: (GoShiken メンバーにのみ表示されます)

出題：9

Which functionality does a NSX Tier-1 Gateway provide to a vSphere with Tanzu deployment?

A. Downlink connection to Tier-0 gateway

B. Static or dynamic routing

C. Layer 2 Switching

D. Downlink connection to segments

正解：D 解答を投票する

解説: (GoShiken メンバーにのみ表示されます)

出題：10

Which two requirements are needed to add new hosts to an existing VI workload in a VMware Cloud Foundation environment? (Choose two.)

A. The host uses only the VLAN network.

B. The host uses a minimum of four network ports.

C. The host uses heterogenous hardware.

D. The host uses the same storage type as the existing cluster hosts.

E. The host uses the same network pool.

正解：D,E 解答を投票する

解説: (GoShiken メンバーにのみ表示されます)

5V0-31.22試験無料問題集「VMware Cloud Foundation Specialist (v2) 認定」