2022年04月実際に出る21450T試験問題集には正確で更新された問題
21450T試験問題集でPDF問題とテストエンジン
質問 34
The monitor commands can be used to get a real time status of the system from SAT.
Which command is incorrect command?
- A. monitor traffic command
- B. monitor security-violations command
- C. monitor system view command
- D. monitor trace station command
正解: D
解説:
質問 35
From which interface you can add, delete or change a user login ?
- A. System Management Interface
- B. SAT interface using PuTTY
- C. Bash interface of System Manager
- D. Element Cut-Through using System Manager
正解: B
質問 36
For which type of users does Call Park best serve?
- A. users who need to retrieve calls from any extension in the system
- B. users who travel internationally using smartphones for basic communication
- C. users who travel domestically using smartphones for basic communication
- D. users who need to pick up calls from their smartphones while traveling
正解: A
質問 37
What information (of remote server) is required when you are preparing to configure the Communication Manager to perform an automatic daily full backup using SCP?
- A. User name, password, and default directory
- B. User name, password, IP address, and default directory
- C. IP address, port number, protocol, and default directory
- D. IP address, port number, and default directory
正解: B
質問 38
Which parameter in the call vector SAT screen instructs the system that the vector is to be used for Meet-me conference?
- A. Enhanced Vectoring?
- B. Attendant Vectoring?
- C. Announcement Prompting?
- D. Meet-me Conf?
正解: D
質問 39
You want a user's station to be able to dial extension 5605 and 5608 only.
What configuration for station will achieve this?
- A. The FRL = 7 to the user's station, FRL = 7 to station 5606 and 5608. Set FRL for all other stations to 6 and lesser.
- B. The FRL =5 to the user's station, FRL = 7 to station 5606 and 5608. Set FRL for all other stations to 5 or lesser.
- C. Assign COR 10 to the user's station. In COR 11, set COR-to-COR calling permission
='n' for all except COR 10. Assign COR 11 to 5605 and 5608. Ensure that these two CORs are not assigned to any other object. - D. Assign COR 11 to the user's station. In COR 11, set COR-to-COR calling permission
='n' for all except COR 10. Assign COR 10 to 5605 and 5608. Ensure that these two CORs are not assigned to any other station object.
正解: D
質問 40
In which SAT form is the PSA feature enabled for a user?
- A. Class of Restriction (COR)
- B. Class of Service (COS)
- C. Station
- D. Mobility Feature List
正解: B
質問 41
Which type of information do you expect to find in the " list history" output report?
- A. Logins/logoffs, administrative and maintenance action commands
- B. Processor occupancy statistics
- C. Security violation status summary
- D. ASG session establishment/rejection data
正解: A
質問 42
Which command must be used to define the system internal number scheme of the extensions?
- A. change dialplan analysis
- B. change uniform-dialplan
- C. change dialplan parameters
- D. change node-names ip
正解: A
質問 43
Which parameters are configured when implementing Automatic Route Selection (ARS)?
- A. Dial Plan, Codec Set, Private Numbering, Network Region
- B. Far-End Node, Near-End Node, Coverage Path, Call Forwarding
- C. Feature Access Code, Digit Analysis, Digit Conversion, Route Pattern, Trunk Group
- D. MGC List, H.248 Link Timer, Call Admission Control, Feature Access Code
正解: C
質問 44
Which type of phone doesn't support Station Lock feature in Communication Manager R8.1?
- A. Analog
- B. H.323
- C. Digital
- D. SIP
正解: D
質問 45
Users are reporting that they cannot make any outgoing calls.
Which interface, page, or command, can you use to see how CM routed the call in real-time?
- A. SMI, Network Configuration page
- B. SAT, list trace command
- C. SMI, Certificate Alarms page
- D. SAT, display node-names command
正解: B
質問 46
Which Facility Restriction Level (FRL) gives the lowest level of permissions?
- A. 0
- B. 1
- C. 2
- D. 3
正解: A
質問 47
Which reset level reloads call processing translations into memory?
- A. 0
- B. 1
- C. 2
- D. 3
正解: B
質問 48
What is the range of COS Profiles in a Cos Group?
- A. 1 thru 10
- B. 0 thru 99
- C. 0 thru 15
- D. 1 thru 100
正解: C
質問 49
The monitor and display capacity SAT commands can be used to get a real-time status of the system using SAT.
Which command should you use to view a summary of the overall condition of the system?
- A. monitor traffic command
- B. list configuration all command
- C. monitor system command
- D. display status command
正解: C
質問 50
Which one cannot be used as Coverage Point in Coverage Path?
- A. Coverage Answer Group
- B. Trunk Group
- C. Announcements
- D. Attendant Group
正解: B
質問 51
Which command is needed to verify an Enhanced Call Forwarding destination?
- A. status station xxxx
- B. change station xxxx
- C. display station xxxx
- D. edit station xxxx
正解: A
質問 52
Which field on the Station SAT form needs to be populated to allow a user to move their station to a different port using PSA?
- A. Mobility
- B. COR
- C. Security Code
- D. Coverage Path 1
正解: C
質問 53
Which Communication Manager SAT command must be used to backup changes
made in volatile RAM to the hard disk, so that in case of a loss of power, the changes will be available?
- A. copy translation all
- B. save translation startup-configuration
- C. copy running-configuration startup-configuration
- D. save translation
正解: D
質問 54
......
合格させるAvaya 21450T試験最速合格にはGoShiken:https://www.goshiken.com/AVAYA/21450T-mondaishu.html