試験内容は定期的に見直されるため、古い教材では安心できません。GoShikenのCisco Implementing Cisco Enterprise Advanced Routing and Services練習問題は2026年の出題範囲に沿って更新されており、300-410の最新の出題傾向を押さえた内容です。ご購入後365日間は無料で最新版をご利用いただけます。

Cisco 300-410 試験概要:

Cisco 300-410 試験シラバストピック:

Cisco Implementing Cisco Enterprise Advanced Routing and Servicesのよくある疑問を解決します

Cisco Implementing Cisco Enterprise Advanced Routing and Services 認定 300-410 試験問題：

問題 #1

Refer to the exhibit. Which action makes 10.1.3.2 the feasible successor to reach 10.200.1.0/24
for location S42T431E64F51?

A. Increase path bandwidth lower than 10.1.1.2 and lower than 10.1.2.2 between RtrA and the
destination.
B. Increase path bandwidth higher than 10.1.2.2 and higher than 10.1.1.2 between RtrA and the
destination.
C. Increase path bandwidth higher than 10.1.2.2 and lower than 10.1.1.2 between RtrA and the
destination.
D. Increase path bandwidth higher than 10.1.1.2 and lower than 10.1.2.2 between RtrA and the
destination.

問題 #2

Refer to the exhibit. The traffic from spoke to hub is dropping. The operations team observes:

- R2-R3 link is down due to the fiber cut.
- R2 and R5 receive traffic from R1 in AS 65101.
- R3 and R6 receive traffic from R4 in AS 65201.
Which configuration resolves the issue?

A. R6(config)#router bgp 65101
R6(config-router)#no neighbor 10.0.0.17 update-source Loopback0
B. R6(config)#router bgp 65201
R6(config-router)#neighbor 10.10.10.5 remote-as 65101
R6(config-router)#neighbor 10.10.10.5 update-source Loopback0
R6(config-router)#neighbor 10.10.10.5 ebgp-multihop 3
C. R5(config)#router bgp 65101
R5(config-router)#no neighbor 10.0.0.18 update-source Loopback0
D. R5(config)#router bgp 65101
R5(config-router)#neighbor 10.10.10.6 remote-as 65201
R5(config-router)#neighbor 10.10.10.6 update-source Loopback0
R5(config-router)#neighbor 10.10.10.6 ebgp-multihop 3

問題 #3

Refer to the exhibit. An administrator must harden a router, but the administrator failed to test the
SSH access successfully to the router. Which action resolves the issue?

A. Configure SSH on the remote device to log in using SSH.
B. Configure enable secret to log in to the device.
C. SSH syntax must be ssh -l user ip to log in to the remote device.
D. SSH must be allowed with the transport output ssh command.

問題 #4

Refer to the exhibit. A network administrator has developed a Python script on the local Linux
machine and is trying to transfer it to the router. However, the transfer fails.
Which action resolves this issue?

A. The Python interpreter must first be enabled with the guestshell enable command.
B. The SSH access must be allowed on the VTY lines using the transport input ssh command.
C. The SSH service must be enabled with the crypto key generate rsa command.
D. The SCP service must be enabled with the ip scp server enable command.

問題 #5

Which group of components works together to create an MPLS VPN?

A. MPLS forwarding, OSPF routing protocol, and BGP peering
B. route target, OSPF routing protocol, and label distribution protocol
C. route target, label distribution protocol, and QoS
D. route target, MP-BGP peering, and MPLS forwarding

解説：