A4040-109試験無料問題集（180題）「IBM Assessment: Power Systems Virtualization Technical Support for AIX and Linux -v2 認定」

出題：1

A client is planning to purchase a Power 770 with 2 enclosures, and needs to have redundancy for multiple LPARs. Which of these solutions provides the most redundancy for the LPARs at least cost?

A. Create two VIO servers assigning IVE and HBA adapters from different enclosures.
Assign a virtual Ethernet adapter from each VIO server to Setup NIB on the LPARs. Assign SAN mapped virtual SCSI disks from each VIO server and use MPIO on the LPARS.

B. Create two VIO servers assigning IVE and HBA adapters from different enclosures.
Configure SEA failover on the VIO servers and assign a virtual Ethernet adapter to the
LPARs. Assign SAN mapped virtual SCSI disks from each VIO server and use MPIO on
the LPARS.

C. Assign an IVE logical port from each enclosure to each LPAR. Assign an HBA from each enclosure to each LPAR.

D. Create a VIO server with two IVE adapters from different enclosures.
Configure EtherChannel on the VIO server and assign a virtual Ethernet adapter to the
LPARs. Assign an HBA from each enclosure to each LPAR.

正解：B 解答を投票する

出題：2

Where can an administrator find the implementation process for configuring a Power 795 to run in TurboCore mode?

A. IBM InfoCenter

B. IBM System Planning Tool

C. Performance Toolbox for AIX

D. IBM Systems Director

正解：A 解答を投票する

出題：3

While reactivating client LPARs following a scheduled power down, some LPARs have lost visibility to their NPIV-allocated SAN LUNs. On investigation it appears the WWNs have changed on the problem LPARs. What is the most likely cause for the change in WWN?

A. The option to randomly assign WWNs for security reasons has been selected.

B. The NPIV adapters on the VIOS LPARs were not tagged as being "required for partition activation."

C. The virtual Fibre Channel client adapters were dynamically allocated to the LPARs before being added to the partition profile.

D. The WWNs will have changed due to the recycle of the Hypervisor. The chsyscfg -r command should be used to recover the previously allocated WWN.

正解：C 解答を投票する

出題：4

Which is the lowest edition of PowerVM that will permit redundant VIO Servers?

A. PowerVM Enterprise Edition

B. PowerVM Basic Edition

C. PowerVM Standard Edition

D. PowerVM Express Edition

正解：C 解答を投票する

出題：5

A customer is planning to purchase a fully populated Power 795. There are 65 applications which need to run and all need an AIX 7 environment. The architect is considering whether to use an LPAR for each application or to use a single large LPAR and have a WPAR for each application.
What must be considered before creating the environment?

A. An activation key for LPARs with more than 128 processors is required.

B. Multiple IVE adapters are required to support all the partitions.

C. There is a limit of 64 WPARs in any AIX V7 global environment.

D. There is a limit of 32 Processors in a WPAR.

正解：A 解答を投票する

出題：6

A key customer application currently can only be hosted under AIX 5.2. Development work is underway to update the application to be compatible with more current versions of AIX. An administrator notices hardware errors are being logged against the legacy POWER3 hardware.
To preserve the application in its current form while avoiding the cost of repairing the legacy hardware, the administrator plans to migrate the application into a versioned WPAR.
The administrator understands that an intact mksysb image of the 5.2 system is required. Which additional elements are required?

A. Hosting AIX 6.1 LPAR AIX 5.2 NIM server POWER6 hardware

B. AIX 7.1 vwpar.52 images LPP POWER7 hardware

C. HMC-managed hardware PowerVM Enterprise edition AIX 7.1

D. AIX 7.1 NIM server POWER7 hardware PowerVM WPAR Manager

正解：B 解答を投票する

出題：7

Certain configurations of Power 770 and Power 780 servers can be ordered with multiple IVE adapters. When designing a configuration to provide improved network availability what fact should be observed as a risk?

A. The same model of IVE must be ordered for each building block.

B. 1Gbps and 10Gbps adapters may not be aggregated into a single logical link.

C. An EtherChannel device created from adjacent IVE ports can result in broadcast storms.

D. IVE adapters do not support hot-plug operations.

正解：D 解答を投票する

出題：8

What will cause a broadcast storm when configuring redundant VIO servers with SEA failover?

A. The secondary SEA is created before enabling failover on the primary SEA.

B. A mismatch of defined VLANs between the primary and secondary SEA.

C. Incorrect EtherChannel configuration on one SEA

D. The secondary SEA is brought online before the configured primary SE

正解：A 解答を投票する

A4040-109試験無料問題集「IBM Assessment: Power Systems Virtualization Technical Support for AIX and Linux -v2 認定」