あなたを必ず合格させるC-S4TM-2023問題集PDF 2024年最新のに更新されたのは195問あります
SAP C-S4TM-2023リアル試験問題と解答を無料で提供いたします
質問 # 23
Which of the following actions can be triggered from the transportation cockpit?
Note: There are 2 correct answers to this question.
- A. Remove a resource from a freight order
- B. Apply a default route to a freight unit
- C. Define the capacity of a truck
- D. Create a freight settlement document
正解：B、D
質問 # 24
For which of the following documents is it possible to do forward and backward scheduling in the transportation cockpit?
- A. Freight order
- B. Sales order
- C. Forwarding order
- D. Freight unit
正解：A
解説：
Transportation Management Overview and Fundamentals
質問 # 25
What is frequently the leading master data system? Please choose the correct answer.
- A. Components under
- B. The ERP system
- C. Applications Reusable
- D. Environment PPF
正解：B
質問 # 26
You add an assessorial charge to a freight order after the freight settlement document (FSD) has been posted and accruals have been booked in materials management. The background report to create FSDs determines change strategy "Reverse and Repost with new FSD" for this freight order.
What will you see in transportation management and materials management? Note: There are 2 correct answers to this question.
- A. 1 purchase order in materials management
- B. 3 service entry sheets in materials management
- C. 3 FSDs in transportation management
- D. 2 FSDs and 1 credit memo in transportation management
正解：C、D
解説：
Transportation Planning
質問 # 27
The master data in SAP TM can be described as a transportation network. To support proper transportation planning and execution, several master data elements are needed.
When combined, these elements outline a transportation network comprised of the following elements: There are 4 correct answers to this question.
- A. Schedules
- B. Transportation lanes
- C. Shipping Condition
- D. Transportation zones and zone hierarchies
- E. Locations (customers, vendors, plants, shipping points, ports, airports, hubs,...)
正解：A、B、D、E
質問 # 28
Purchase order integration to SAPTM is achieved using output control. determine whether this statement is true or false.
- A. false
- B. true
正解：A
質問 # 29
In the logistics integration profile, the Incoterm location stage building is set to "Source location to Incoterm location- type 1". You create a sales order in which you have specified an Incoterm and Incoterm location. What will be the result of these settings?
- A. Two stages created: An active stage from the Incoterm location to the destination location, and an additional non-planning-relevant stage from the source location to the Incoterm location
- B. One stage created: An active stage from the source location to the Incoterm location is created
- C. Two sta9es created: An active stage from the source location to the Incoterm location, and an additional non-planning-relevant stage from the Incoterm location to the destination location is created
- D. One stage created: An active stage from the Incoterm location to the destination location
正解：C
質問 # 30
What do you need to maintain to ensure that certain products are always shipped by air?
- A. Instructions
- B. Incompatibilities
- C. Allocations
- D. Compartments
正解：B
質問 # 31
You create a freight agreement request for quotation (RFQ) master with seven RFQ items.
* Carrier A is NOT incumbent for three items and is removed from those items.
* Four other carriers are assigned to this freight agreement RFQ master.
You generate the individual freight agreement RFQs. How many individual freight agreement RFQs are created for carrier A?
- A. 0
- B. 1
- C. 2
- D. 3
正解：A
質問 # 32
You have created two freight units for customer A and two freight units for customer B.
You have defined the transportation network (see attached diagram) and no incompatibilities exist. How many freight orders does the optimizer create using only route-based distance costs?
- A. 0
- B. 1
- C. 2
- D. 3
正解：D
質問 # 33
In TM, organizational units are used to represent the organizational structure of a company. Organizational structures in SAP TM are flexible. An organizational unit can have the following organizational functions in SAP TM:
There are 3 correct answers to this question.
- A. TRRO
- B. Purchasing
- C. Sales
- D. Planning and Execution
正解：B、C、D
質問 # 34
You transfer an SAP ERP sales order to SAP TM in the XML monitor of SAP TM you find the message shown in the screenshot. What does this entry mean?
- A. The order-based transportation requirement was NOT created because the message encountered an error.
- B. The order-based transportation requirement was created SUCCESSFULLY.
- C. The order-based transportation requirement was NOT created because the message is schedu for processing but is NOT processed yet.
- D. The order-based transportation requirement was NOT created because the message was transferred to an external application but the message has error state on outbound side.
正解：C
質問 # 35
Forwarding house FWH1 is responsible for a forwarding order (FWO). The stages are set up as shown in the attached table 1. In total two freight orders are created for the three stages. The freight charges for execution organization FWH_Ex01 (see attached table 2) are calculated with resolution base 'root'.
If there is an internal agreement based on costs between FWH1 and FWH_Ex01, what is the internal settlement charge owed by FWH1 to FWH_Ex01? (1 correct answer)
- A. USD 475
- B. USD 375
- C. USD 450
- D. USD 400
正解：B
質問 # 36
Which of the following can you use to determine a stage sequence in a forwarding order? Note: There are 2 correct answers to this question.
- A. Stage profile
- B. Stage type
- C. Movement type
- D. Shipping type
正解：A、C
質問 # 37
Which of the following driver management settings are maintained in freight order customization?
- A. Home location
- B. Number of required drivers
- C. Default driver
- D. Default truck handling
正解：A
質問 # 38
What is selected by a standard program (rsnastOO ) that is set to run at regular intervals? Please choose the correct answer.
- A. The output to be sent
- B. Inventory investments
- C. Service goals .
- D. Dynamically link customer
正解：A
質問 # 39
You want to print a road waybill document, a loading list, and labels for your freight orders with freight order type FOT1. You also want to send e-mails and XML messages to the carriers of freight orders of this type. What is the MINIMUM number of PPF action profiles that you need to define for this purpose?
- A. 0
- B. 1
- C. 2
- D. 3
正解：A
質問 # 40
The following settings are defined for a freight order from location A to location B with two freight units:
* The distance between locations A and B in the transportation lane is 1500 km, the duration is 19 hours and the Fix Transportation Duration flag is set. The average speed for the means of transport is defined as 100 km/h and the GIS quality flag is NOT set.
Loading and unloading of each freight unit at locations A and B is defined as 1 hour.
The vehicle resource is available weekdays from 8:00 am to 8:00 pm.
* Loading starts on Monday at 8:30 am. When is unloading finished?
Please choose the correct answer.
- A. Tuesday 7:30 am
- B. Tuesday 7:30 pm
- C. Tuesday 5:30 pm
- D. Tuesday 3:30 pm
正解：B
質問 # 41
What is maintained in the ERP system, from where it is transferred to SAP TM as locations and business partners using the SAP Core Interface (GIF)?
Please choose the correct answer.
- A. The customer and supplier master data.
- B. The output of error
- C. You can use the dangerous.
- D. The processing of the dangerous.
正解：A
質問 # 42
In which document types can you enable cost distribution in SAP TM?
There are 2 correct answers to this question.
- A. Freight order
- B. Forwarding settlement document
- C. Freight unit
- D. Freight settlement document
正解：A、D
質問 # 43
You want to set up charge calculation for freight orders. Valid charges should consist of a based on the distance and gross weight of the freight order, and a supplemental charge per container that is included in the freight order. Multiple containers are allowed for each freight order, and the charge is based on the container type can be small, medium or large. What is the minimum number of charge lines with instruction type "standard" that you must set up?
- A. 0
- B. 1
- C. 2
- D. 3
正解：D
質問 # 44
......
合格できるSAP C-S4TM-2023試験情報と無料練習テスト：https://www.goshiken.com/SAP/C-S4TM-2023-mondaishu.html
2024年最新のの問題C-S4TM-2023問題集を試そう！更新されたSAP試験が合格できます：https://drive.google.com/open?id=1RqCCLpeYNZH5hXM9wA-y7D9oSjiztsLu