合格させる試験完全版H35-912-ENU問題集175解答
検証済みH35-912-ENU問題集と解答100%合格はここ
質問 51
If you are sitting in the back seat of the car, there is no need to wear a seat belt.
- A. False
- B. True
正解: A
質問 52
ONT is the "optical network terminal", commonly known as the light cat, which is usually placed in the living room or study room to provide Internet, video, voice and other services for home users.
- A. True
- B. False
正解: A
質問 53
The EPW3000-12A is an E9000 AC power module that supports 100V AC~ 240V AC input. The E9000 does not support DC power input.
- A. False
- B. True
正解: A
質問 54
How many half-width slots does the E9000 support?
- A. 0
- B. 1
- C. 2
- D. 3
正解: B
質問 55
Server survey includes two scenarios, one for determining the configuration of the BoQ for the pre-sales phase and for the supply chain, and the other for the detailed installation for hardware installation.
- A. True
- B. False
正解: A
質問 56
In the MSO network, HFC is an abbreviation for Hybrid Fiber Coaxial.
- A. True
- B. False
正解: A
質問 57
Regarding power-on and power-off, which of the following statements is correct? (Multiple Choice)
- A. Please wait at least 1 minute after turning off the power, then turn the power back on.
- B. After turning off the power, you can turn it back on immediately.
- C. Do not cut off the power before the hard disk running indicator stops flashing to avoid damage to the hard disk and data loss.
- D. Do not plug or unplug cables and FRU (Reid Replaceable Unit) modules during power-on, otherwise data may be lost.
正解: A,C,D
質問 58
The location of the supplier communication equipment connected to the power supply output breaker of the equipment room should be determined according to which of the following options? (Multiple Choice)
- A. Design documents
- B. Connected on the large rated output terminal
- C. Free use of idle terminals
- D. Reserved terminals for customer planning
正解: A,D
質問 59
Which of the following statements about going to the lower part of working at height and hoisting correct?
- A. It is forbidden to enter the lower part of working at height and hoisting.
- B. In the case of safety reminder, on the basis of PPE, you can enter the lower part of working at height and hoisting.
- C. You can enter the lower part of working at height and hoisting. You need to bring PPE.
正解: A
質問 60
Huawei's equipment is maintained by Huawei. When we perform engineering quality inspection, we can enter the equipment room and directly operate Huawei equipment.
- A. False
- B. True
正解: A
質問 61
Huawei's recommended grounding resistance must be less than how much ohms?
- A. 0
- B. 1
- C. 2
- D. 3
正解: C
質問 62
Which are the correct statements in the SOP interpretation of the MA5800? (Multiple choice)
- A. Workers need to wear safety helmets and anti-shoes when entering the station.
- B. The DC power supply system of the engine room must have been installed to provide a stable power supply.
- C. The transmission equipment in engine room does not need to be installed.
- D. The installation scenario must be clear: cement floor installation or anti-static floor installation, etc.
正解: A,B,D
質問 63
What is the range of copper wire recommended by Vectoring/SuperVector/G.fast in the FTTC scenario?
- A. 5Km or more
- B. 1Km~3Km
- C. 500m~1Km
- D. 100m~500m
正解: D
質問 64
If an external person uses an office application system for work, which of the following roles can be used to apply for a personal account?
- A. Outsourced employees authorized by the business unit
- B. Outsourced PM that is present
- C. Huawei employees authorized by the business department
- D. Outsourced employees who are present
正解: C
質問 65
The following are the operations that should be described before the power-on of the communication device. What are the correct descriptions? (Multiple Choice)
- A. All power switches of the powered device are disconnected
- B. Measuring no short circuit inside the powered device
- C. The output switch of the power supply device is disconnected and the output voltage is normal.
- D. Measure the power supply circuit without short circuit between each other and the ground
- E. Rated output current meets the needs of powered devices
- F. Check the electrical connection is firm and reliable
正解: A,B,C,D,E,F
質問 66
Which of the following should be applied to the rope when manually hoisting?
- A. Allowing jerk, emergency stop, flashing, etc. in the case of power assurance
- B. Allowing jerk, emergency stop, flashing, etc.
- C. Do not allow jerk, emergency stop, flashing, etc.
正解: C
質問 67
When the MA5800 uplink fiber connection is connected, which statements are correct? (Multiple Choice)
- A. Fiber needs to be tied
- B. Upstream adopts SC type fiber
- C. One end is connected to the uplink port, and the other end is connected to the corresponding optical port of the ODF frame.
- D. The fiber needs to be placed in the bellows at the top of the cabinet.
正解: A,C,D
質問 68
......
H35-912-ENU問題集完全版解答で試験学習ガイド：https://www.goshiken.com/Huawei/H35-912-ENU-mondaishu.html