合格できるFortinet NSE7_ADA-6.3のPDF問題集！最近更新された36問あります
更新されたテストエンジンNSE7_ADA-6.3練習問題集と練習試験合格させます
Fortinet NSE7_ADA-6.3（Fortinet NSE 7- Advanced Analytics 6.3）認定試験は、Fortinetセキュリティファブリックアーキテクチャとその高度な分析機能を詳細に理解する認定です。認定試験は、ネットワークをサイバー脅威から保護するために、Fortinetソリューションの展開、構成、および管理における候補者のスキルと知識を検証するように設計されています。
質問 # 18
From where does the rule engine load the baseline data values?
- A. The daily database
- B. The profile report
- C. The memory
- D. The profile database
正解：D
解説：
Explanation
The rule engine loads the baseline data values from the profile database. The profile database contains historical data that is used for baselining calculations, such as minimum, maximum, average, standard deviation, and percentile values for various metrics.
質問 # 19
Refer to the exhibit.
The rule evaluates multiple VPN logon failures within a ten-minute window. Consider the following VPN failure events received within a ten-minute window:
How many incidents are generated?
- A. 0
- B. 1
- C. 2
- D. 3
正解：D
解説：
Explanation
The rule evaluates multiple VPN logon failures within a ten-minute window. The rule will generate an incident if there are more than three VPN logon failures from the same source IP address within a ten-minute window.
Based on the VPN failure events received within a ten-minute window, there are two incidents generated:
* One incident for source IP address 10.10.10.10, which has four VPN logon failures at 09:01, 09:02,
09:03, and 09:04.
* One incident for source IP address 10.10.10.11, which has four VPN logon failures at 09:06, 09:07,
09:08, and 09:09.
質問 # 20
Refer to the exhibit.
The service provider deployed FortiSIEM without a collector and added three customers on the supervisor.
What mistake did the administrator make?
- A. Customer A and customer B have overlapping IP addresses.
- B. Collectors must be deployed on all customer premises before they are added to organizations on the supervisor.
- C. At least one collector must be deployed to collect logs from service provider infrastructure devices.
- D. The number of workers on the FortiSIEM cluster must match the number of customers added.
正解：A
解説：
Explanation
The mistake that the administrator made is that customer A and customer B have overlapping IP addresses.
This will cause confusion and errors in event collection and correlation, as well as CMDB discovery and classification. To avoid this problem, each customer should have a unique IP address range or use NAT to translate their IP addresses.
質問 # 21
Refer to the exhibit.
Which statement about the rule filters events shown in the exhibit is true?
- A. The rule filters events with an event type that belong to the Domain Account Locked CMDB group or a reporting IP that belong to the Domain Controller applications group.
- B. The rule filters events with an event type that belong to the Domain Account Locked CMDB group and a user that belongs to the Domain Controller applications group.
- C. The rule filters events with an event type that equals Domain Account Locked and a reporting IP that equals Domain Controller applications.
- D. The rule filters events with an event type that belong to the Domain Account Locked CMDB group and a reporting |P that belong to the Domain Controller applications group.
正解：D
解説：
Explanation
The rule filters events with an event type that belong to the Domain Account Locked CMDB group and a reporting IP that belong to the Domain Controller applications group. This means that only events that have both criteria met will be processed by this rule. The event type and reporting IP are joined by an AND operator, which requires both conditions to be true.
質問 # 22
Why can collectors not be defined before the worker upload address is set on the supervisor?
- A. Collectors receive the worker upload address during the registration process
- B. To ensure that the service provider has deployed at least one worker along with a supervisor
- C. Collectors can only upload data to a worker, and the supervisor is not a worker
- D. To ensure that the service provider has deployed a NFS server
正解：A
解説：
Explanation
Collectors cannot be defined before the worker upload address is set on the supervisor because collectors receive the worker upload address during the registration process. The worker upload address is a list of IP addresses of worker nodes that can receive event data from collectors. The supervisor provides this list to collectors when they register with it, so that collectors can upload event data to any node in the list.
質問 # 23
Refer to the exhibit.
An administrator wants to remediate the incident from FortiSIEM shown in the exhibit.
What option is available to the administrator?
- A. Run the block domain Windows DNS
- B. Run the block IP FortiOS 5.4
- C. Quarantine IP FortiClient
- D. Run the block MAC FortiOS.
正解：B
解説：
Explanation
The incident from FortiSIEM shown in the exhibit is a brute force attack on a FortiGate device. The remediation option available to the administrator is to run the block IP FortiOS 5.4 action, which will block the source IP address of the attacker on the FortiGate device using a firewall policy.
質問 # 24
What is Tactic in the MITRE ATT&CK framework?
- A. Tactic is the tool that the attacker uses to compromise a system
- B. Tactic is how an attacker plans to execute the attack
- C. Tactic is a specific implementation of the technique
- D. Tactic is what an attacker hopes to achieve
正解：D
解説：
Explanation
Tactic is what an attacker hopes to achieve in the MITRE ATT&CK framework. Tactic is a high-level category of adversary behavior that describes their objective or goal. For example, some tactics are Initial Access, Persistence, Lateral Movement, Exfiltration, etc. Each tactic consists of one or more techniques that describe how an attacker can accomplish that tactic.
質問 # 25
How can you invoke an integration policy on FortiSIEM rules?
- A. Through Incident Notification settings
- B. Through Notification Policy settings
- C. Through External Authentication settings
- D. Through remediation scripts
正解：B
解説：
Explanation
You can invoke an integration policy on FortiSIEM rules by configuring the Notification Policy settings. You can select an integration policy from the drop-down list and specify the conditions for triggering it. For example, you can invoke an integration policy when an incident is created, updated, or closed.
References: Fortinet NSE 7 - Advanced Analytics 6.3 Exam Description, page 9
質問 # 26
Refer to the exhibit.
Why is the windows device still in the CMDB, even though the administrator uninstalled the windows agent?
- A. The device must be deleted from backend of FortiSIEM
- B. The device must be deleted manually from the CMDB
- C. The device has performance jobs assigned
- D. The device was not uninstalled properly
正解：B
解説：
Explanation
The windows device is still in the CMDB, even though the administrator uninstalled the windows agent, because the device must be deleted manually from the CMDB. Uninstalling the windows agent does not automatically remove the device from the CMDB, as there may be other sources of data for the device, such as SNMP or syslog. To delete the device from the CMDB, the administrator must go to CMDB > Devices > All Devices, select the device, and click Delete.
質問 # 27
Refer to the exhibit.
The exhibit shows the output of an SQL command that an administrator ran to view the natural_id value, after logging into the Postgres database.
What does the natural_id value identify?
- A. An agent
- B. The collector
- C. The supervisor
- D. The worker
正解：B
解説：
Explanation
The natural_id value identifies the collector in the FortiSIEM system. The natural_id is a unique identifier that is assigned to each collector during the registration process with the supervisor. The natural_id is used to associate events and performance data with the collector that collected them.
質問 # 28
Which syntax will register a collector to the supervisor?
- A. phProvisionCollector --add
- B. phProvisionCollector --add
- C. phProvisionCollector --add
- D. phProvisionCollector --add
正解：B
解説：
Explanation
The syntax that will register a collector to the supervisor is phProvisionCollector --add <supervisor IP>. This command will initiate the registration process between the collector and the supervisor, and exchange certificates and configuration information. The <supervisor IP> parameter is the IP address of the supervisor node.
質問 # 29
Which three processes are collector processes? (Choose three.)
- A. phRuleMaster
- B. phParser
- C. phMonitorAgent
- D. phReportM aster
- E. phAgentManaqer
正解：A、B、C
解説：
Explanation
The collector processes are responsible for receiving, parsing, normalizing, correlating, and monitoring events from various sources. The collector processes are phParser, phRuleMaster, and phMonitorAgent.
質問 # 30
Refer to the exhibit.
Why was this incident auto cleared?
- A. Within five minutes, the packet loss percentage dropped to a level where the host IP of the original rule matches the host IP of the clear condition pattern
- B. The original rule did not trigger within five minutes
- C. Within five minutes, the packet loss percentage dropped to a level where the reporting IP is same as the source IP
- D. Within five minutes the packet loss percentage dropped to a level where the reporting IP is the same as the host IP
正解：A
解説：
Explanation
The incident was auto cleared because within five minutes, the packet loss percentage dropped to a level where the host IP of the original rule matches the host IP of the clear condition pattern. The clear condition pattern specifies that if there is an event with a packet loss percentage less than or equal to 10% and a host IP that matches any host IP in this incident, then clear this incident.
質問 # 31
How do customers connect to a shared multi-tenant instance on FortiSOAR?
- A. The MSSP must provide secure network connectivity between the FortiSOAR manager node and the customer devices.
- B. The MSSP must install an agent node on the customer's network to connect to the customer's shared multi-tenant instance.
- C. The MSSP must install a Secure Message Exchange node to connect to the customer's shared multi-tenant instance.
- D. The customer must install a tenant node to connect to the MSSP shared multi-tenant instance.
正解：B
解説：
Explanation
To connect to a shared multi-tenant instance on FortiSOAR, the MSSP must install an agent node on the customer's network. The agent node acts as a proxy between the customer's devices and the FortiSOAR manager node. The agent node also performs data collection, enrichment, and normalization for the customer's data sources. References: Fortinet NSE 7 - Advanced Analytics 6.3 Exam Description, page 11
質問 # 32
......
Fortinet NSE7_ADA-6.3問題集でカバー率リアル試験問題：https://www.goshiken.com/Fortinet/NSE7_ADA-6.3-mondaishu.html
問題集お試しセットNSE7_ADA-6.3テストエンジン問題集トレーニングには36問あります：https://drive.google.com/open?id=1G3WWk-YTwOcWIt_5Py1wvjEwpQRNNHRq