更新されたのは2023年11月は100%カバー率でOSP-002リアルな試験問題で100%合格保証
実際問題を使おうBICSI問題集で100%無料で使えるOSP-002試験問題集
OSP-002試験は、屋外プラントインフラストラクチャの設計、インストール、およびメンテナンスの経験を持つ個人を対象としています。これには、データと音声信号を伝送するために使用されるファイバーオプティックケーブル、銅線、およびその他のタイプのケーブルが含まれます。試験では、OSP設計の原則、ケーブルルーティングと配置、および安全規制など、幅広いトピックがカバーされます。
BICSI OSP-002認定試験は、植物設計者の外部に認定されようとしている個人の知識とスキルをテストするように設計されています。この認定は、外部の植物インフラストラクチャの設計、設置、および管理に関与している電気通信業界の専門家を対象としています。 OSP-002認定は、外部の植物設計の分野における専門知識の特徴として認識されており、雇用主とクライアントの両方から高く評価されています。
質問 # 16
What color code order are wires punched down on a 66 block?
- A. Just like a 110 block, BLOG (blue, orange, green, brown)
- B. Depends on whether its T568A, T568B or USOC
- C. Doesn't matter what order
- D. Same as a Cat 3 jack
正解:A
質問 # 17
Which of the following are not necessary in a centralized fiber optic cabling architecture per industry standards?
- A. Telecom closets
- B. Wall outlets
- C. NIC cards
- D. Repeaters or hubs
正解:A
質問 # 18
UTP cable is designed to be pulled with no more than \_\_\_\_\_ pounds tension.
- A. 0
- B. 1
- C. 2
- D. 3
正解:C
質問 # 19
Attenuation in copper cable\_\_\_\_\_\_\_\_\_\_\_\_.
- A. Is higher at higher frequencies
- B. Is the same at all frequencies
- C. Is highest at 10 MHz
- D. Is lower at higher frequencies
正解:A
質問 # 20
Why is the structured cabling standard not like "code"?
- A. It changes every year
- B. It's voluntary, not required by law
- C. It doesn't deal with flammability
- D. It is not written by the NFPA
正解:B
質問 # 21
What is the main characteristic of unshielded twisted pair Category 5e or Category 6 cable that gives it high frequency performance?
- A. The connectors
- B. The rate of twists in the pairs of wires
- C. High performance plastics in the insulation of the pairs
- D. The size of the conductors
正解:B
質問 # 22
Structured cabling standards call for a maximum length of multimode fiber optic cable for backbones of
\_\_\_\_\_\_\_\_\_\_.
- A. 3000 meters
- B. 800 meters
- C. 1000 meters
- D. 2000 meters
正解:D
質問 # 23
Wavelength division multiplexing uses __________ to transmit multiple signals on a single fiber.
- A. The high fiber bandwidth
- B. F-P Lasers
- C. The wide spectral width of lasers
- D. The ability of fiber to transmit multiple wavelengths without mixing
正解:D
質問 # 24
The difference between a fiber optic connector and a splice is __________.
- A. Connectors require adhesives
- B. Connectors are smaller than splices
- C. Connectors are demountable, while splices are permanent
- D. Splices need expensive tools
正解:C
質問 # 25
The \_\_\_\_\_\_\_\_\_\_ protects the fiber from harm.
- A. All of the above
- B. Jacket
- C. Primary buffer coating
- D. Aramid fiber strength members
正解:A
質問 # 26
What type of source is used for testing singlemode fibers?
- A. VCSEL
- B. LED
- C. Laser
正解:C
質問 # 27
What is the cable from the telecom room (closet) to the work area called?
- A. Backbone cabling
- B. Horizontal cabling
- C. Work area cable
- D. Patchcord
正解:B
質問 # 28
Category 6A cable is specified and must be tested during certification to \_\_\_ MHz.
- A. 0
- B. 1
- C. 2
- D. 3
正解:B
質問 # 29
Multimode graded-index glass fiber optic cables are tested with \_\_\_ sources at \_\_\_\_\_\_ and \_\_\_\_\_ wavelengths.
- A. LED, 850, 1300 nm
- B. Laser, 1310, 1550 nm
- C. Laser, 980, 1400 nm
- D. LED, 650, 850 nm
正解:A
質問 # 30
Which reference method is required for TIA 568?
- A. Three cable reference
- B. Two cable reference
- C. Any method as long as it is documented
- D. One cable reference
正解:C
質問 # 31
The largest contributor to fiber attenuation is \_\_\_\_\_\_\_\_\_\_.
- A. Bending losses
- B. Scattering
- C. Microbends
- D. Absorption
正解:B
質問 # 32
A client hired an ICT distribution designer who is designing some additional capacity for a customer owned aerial outside plant. Which of the following would be a PRIMARY consideration?
- A. Clearances will still be adequate with the added equipment.
- B. Sufficient space exists to install additional guying if required.
- C. That all of the poles on the path are at least Class 3.
- D. Utility coordination with public utilities verifies minimum inductive interference.
正解:A
質問 # 33
The common IEEE 802.11b wireless LAN is also called
- A. WiMax
- B. Hot Spot
- C. Bluetooth
- D. WiFi
正解:D
質問 # 34
The international standard for structured cabling is \_\_\_\_\_\_\_\_?
- A. ISO-11801
- B. ISO-9000
- C. IEC-0001
- D. TIA-568
正解:A
質問 # 35
What wavelengths are appropriate for use with singlemode fiber?
- A. 1310 & 1550 nm
- B. 850 & 1490 nm
- C. 650 & 850 nm
- D. 850 & 1300 nm
正解:C
質問 # 36
The Cat 3 jack is the same as a Cat 5e/6 jack except _________.
- A. It is keyed to snap into outlets upside down
- B. There are no internal twists to enhance performance
- C. The punchdowns fit bigger wires
- D. It only connects to RJ-45 plugs
正解:B
質問 # 37
In premises applications, OTDRs are limited in usefulness by their \_\_\_\_\_\_.
- A. Output power
- B. Distance capability
- C. Software
- D. Distance Resolution
正解:D
質問 # 38
......
BICSI OSP-002(BICSI Outside Plant Designer(OSP))認定試験は、外部プラント設計の分野での知識とスキルをテストするために設計されています。この認定資格は、ファイバーオプティックケーブルシステム、銅ケーブルシステム、および無線ネットワークを含む外部プラントインフラストラクチャの設計と実装に関わるプロフェッショナルに最適です。
OSP-002問題集PDFでOSP-002リアル試験問題解答:https://www.goshiken.com/BICSI/OSP-002-mondaishu.html