最新のNS0-526試験のリアル試験問題 本日無料更新されました
NS0-526リアル試験問題解答は更新された[2022年01月02日]
Network Appliance NS0-526 認定試験の出題範囲：
| トピック | 出題範囲 |
|---|---|
| トピック 1 |
|
| トピック 2 |
|
| トピック 3 |
|
| トピック 4 |
|
| トピック 5 |
|
| トピック 6 |
|
| トピック 7 |
|
質問 82
Which technology uses synchronous replication?
- A. SVM DR
- B. MetroCluster mirrored aggregate
- C. FabricPool
- D. SnapMirror XDP
正解: D
質問 83
You want to ensure that you are using compatible hardware and software versions with your MetroCluster installation.
Which tool would accomplish this task?
- A. Interoperability Matrix Tool
- B. System-Level Diagnostics tool (SLDIAG tool)
- C. Hardware Universe
- D. OneCollect
正解: A
質問 84
Given the command shown below: snapmirror policy add-rule -vserver vs1 -policy policy -snapmirror-label weekly -keep 52 What does this command do?
- A. It retains 52 weekly Snapshot copies on the source storage virtual machine.
- B. It retains 52 weekly Snapshot copies on the destination volume.
- C. It retains 52 weekly Snapshot copies on the destination storage virtual machine.
- D. It retains 52 weekly Snapshot copies on the source volume.
正解: C
質問 85
In clustered Data ONTAP, you are creating MirrorAndVault XDP relationships between existing primary and secondary volumes. The Snapshot copy policies have already been created and assigned. The peering is already established and functional.
In clustered Data ONTAP, which three actions should be taken? (Choose three.)
- A. Create the transfer policy.
- B. Create and initialize the SnapMirrorrelationship.
- C. Set up the retention on the secondary volume.
- D. Create the intercluster LIFs.
- E. Add the inter-cluster LIF to the broadcast domain.
正解: A,B,C
質問 86
You are given the vsadmin account credentials for an SVM that is delegated to you by your organization's shared services group. You are asked to verify that all of the volumes in your SVM are protected with SnapMirror.
In this scenario, what would you use to accomplish this task?
- A. OnCommand Unified Manager
- B. XCP
- C. CLI
- D. OnCommand System Manager
正解: C
質問 87
A customer has ONTAP 9.5 clusters running at two nearby locations. The customer wants a zero RPO for one mission-critical volume.
In this scenario, which two NetApp solutions satisfy this requirement while using the existing ONTAP clusters? (Choose two.)
- A. FabricPool
- B. SyncMirror
- C. SnapMirror Synchronous in StrictSync mode
- D. SnapMirror Synchronous in Sync mode
正解: C,D
質問 88
Your customer wants to implement a SnapVault relationship, but is concerned that the initial transfer will use up all of their network bandwidth.
Which solution should you recommend to the customer?
- A. Manually copy each directory from the source volume to the destination volume during times when the network utilization is low.
- B. Set up a SyncMirror relationship to a NetApp controller in the same data center, than ship the controller to the destination site.
- C. Use the SMTape functionality to back up the source volume to tape and use the tape to transfer the base snapshot copy to the destination volume.
- D. Enable volume efficiency on the destination volume.
正解: C
質問 89
Your customer has issued the metrocluster heal command. Which two statements are true regarding this command?
(Choose two.)
- A. The customer has one node in the site down and wants to heal the cluster.
- B. The customer has to run the command twice.
- C. The customer has replaced failed disks in one of the clusternodes.
- D. The customer is preparing for a disaster recovery switchback.
正解: C,D
質問 90
Click the Exhibit button.
Referring to the exhibit, what two Search Criteria check boxes need to be used to provide a supported solution for protecting Windows Server 2019 DCE 64-bit, x64 host using local NetApp LUNs with SnapCenter Server 4.1.1? (Choose two.)
- A. SnapCenter Host Plugin
- B. Browser
- C. SnapCenter Application Plugin
- D. Host OS (OS)
正解: A,D
質問 91
A client decided totransition from a NetApp Storage Encryption environment that uses a KMIP-based centralized key management server to a NetApp Volume Encryption environment that uses onboard key management.
Which two steps are required to complete this task?
(Choosetwo.)
- A. All connections to the external key manager server must be disconnected.
- B. You must use the volume-move command to un-encrypt the storage system's encryptedvolumes.
- C. Cluster-wide FIPS compliance mode must be enabled on all nodes in the cluster.
- D. You must set the manufacturer secure ID (MSID) on each encrypted disk to 0x0.
正解: A,D
質問 92
Click the Exhibit button.
A client has a SnapMirror relationship between two sites that is scheduled to run once a day at 12:15 a.m. They have a network connection between two sites that provides 100 Mbps on bandwidth. By performing the backup at this time, they can maximize their bandwidth use.
Referring to the exhibit, how long does the SnapMirror update take to finish?
- A. four hours
- B. two hours
- C. three hours
- D. one hour
正解: B
質問 93
You are upgrading your Data ONTAP cluster from clustered Data ONTAP 8.3 to clustered Data ONTAP 9.1.
Which two actions mustbe performed for the SnapMirror relationships?
(Choose two.)
- A. Delete and re-create SnapMirror relationships.
- B. Break existing SnapMirror relationships.
- C. After the upgrade, resynchronize, and resume SnapMirror relationships.
- D. Delete the obsolete SnapMirror Snapshot copies which were created in Data ONTAP 8.3.
正解: B,C
質問 94
How are the FC-VI links cabled in MetroCluster for ONTAP?
- A. one cable to each of the two local FC switches
- B. directly to the corresponding local HA partner
- C. directly to the corresponding remote HA partner
- D. controller A is cabled to FC switch A, controller B has both cabled to FC switch B
正解: A
質問 95
You are mirroring the root volume of a storage virtual machine (SVM) according to NetApp best practices.
In this scenario, which two statements are true? (Choose two.)
- A. A mirror is needed on every node in the cluster.
- B. A mirror is only needed outside of the local HA pair.
- C. The relationship should be set to LS.
- D. The mirrors are only needed on the nodes that do not host the source volume.
正解: A,C
質問 96
A customer wants to monitor the current utilization of storage capacity to ensure storage availability. They decide to implement quotas on some volumes.
What are threetypes of quotas that would satisfy the customer's requirement? (Choose three.)
- A. group
- B. user
- C. aggregate
- D. volume
- E. qtree
正解: A,B,E
質問 97
You want to schedule daily differential backups for vault backups and weekly full backups to tape using SnapProtect.
Which policy would you use to configure the Primary (Classic) tape backup?
- A. schedule policy
- B. storage policy
- C. protection policy
- D. provisioning policy
正解: B
質問 98
You decide to enable SnapMirror network compression on your NetApp clustered Data ONTAP environment.
Which two statements are correct about enabling this feature? (Choose two.)
- A. The data is compressed only while it traverses the network.
- B. You may only enable SnapMirror network compression on one HA pair in a cluster, and traffic 1-1 is limited to routing through those nodes.
- C. The data transfer between the clusters must use the NDMP protocol.
- D. The compression engine creates multiple transfer threads corresponding to the number of CPUs on the source storage system.
正解: A,D
質問 99
A user's home directory, mounted using NFS, has been encrypted by a ransomware attack.
Theuser asks you to retrieve the data.
In this scenario, which process would allow you to accomplish this task?
- A. Restore the data from a Snapshot copy.
- B. Apply the XDPDefault policy to the volume.
- C. Apply the MirrorAllSnapshots policy to the volume.
- D. Take a new Snapshot copy of the volume.
正解: A
質問 100
You have deployed a 4-node fabric MetroCluster configuration for cross-site disaster-recovery protection.
In this scenario, which two statements are correct for an automatic unplanned switchover (AUSO) operation? (Choose two.)
- A. AUSO is triggered in the event of a site-wide switch failure to provide nondisruptive operations.
- B. AUSO is triggered in the event of a site-wide controller failure to provide nondisruptive operations.
- C. AUSO is enabled by default on a MetroCluster cluster.
- D. AUSO is triggered in the event of a complete site-wide failure to provide nondisruptive operations.
正解: B,C
質問 101
What are three OnCommand Workflow Automation building blocks? (Choose three.)
- A. filters
- B. branches
- C. dictionary entries
- D. templates
- E. icons
正解: A,C,D
質問 102
You are in a SnapProtect v11 solution environment creating a new subclient with NAS data.
Besides the subclient name, what other information is mandatory? (Choose three.)
- A. the backup content path
- B. the backup schedule
- C. the retention policy
- D. the Snap Engine
- E. the storage policy
正解: B,D,E
質問 103
......
最新のNS0-526学習ガイド2022年最新の- 提供するのはテストエンジンとPDF：https://www.goshiken.com/NetworkAppliance/NS0-526-mondaishu.html