最新 [2023年12月03日]ISTQB-CTFL試験問題には有効なISTQB-CTFL問題集PDF
ISTQB-CTFL練習テスト問題解答は更新された78問があります
質問 # 36
ST is a Software Testing organization which utilizes a testing knowledge base. Access to ST knowledge base can be either full or limited. Access level is determined based on ST certification and testing experience as follows:
1. If ST certified, with less than 5 years testing experience - allow limited access
2. If ST certified, 5-10 years of testing experience - allow full access
3. If not ST certified with 5-10 years of testing experience - allow limited access.
What would be the results for:
A - ST certified. 12 years of testing experience
B - Not ST certified. 7 years of testing experience
C - Not ST certified. 3 years of testing experience
- A. A - unknown
B - limned access
C- unknown - B. A - unknown
B - full access
C - unknown - C. A - full access
B - limited access
C - limited access - D. A - full access
B - limited access
C - unknown
正解：D
解説：
The correct answer can be derived by applying the given rules to each case:
A is ST certified and has 12 years of testing experience, which is more than 10 years. Therefore, A does not match any of the rules and the result is unknown.
B is not ST certified and has 7 years of testing experience, which is between 5 and 10 years. Therefore, B matches rule 3 and the result is limited access.
C is not ST certified and has 3 years of testing experience, which is less than 5 years. Therefore, C does not match any of the rules and the result is unknown. Verified Reference: This question does not require any external references, as it is based on logical reasoning.
質問 # 37
Which of the following is NOT a common objective of testing?
- A. Finding defects in the software
- B. Debugging the software to find the reason for defects
- C. Providing information on the status of the system
- D. Preventing defects
正解：B
解説：
Debugging the software to find the reason for defects is not a common objective of testing, but rather a task of development or maintenance. Debugging is a process of locating and fixing errors in the software code, while testing is a process of finding and reporting defects in the software behavior or quality. Testing does not aim to fix defects, but rather to provide information on their existence and impact. The other options are common objectives of testing. Finding defects in the software is one of the main objectives of testing, as it helps to improve the quality and reliability of the software. Preventing defects is another objective of testing, as it helps to avoid rework and reduce costs and risks. Providing information on the status of the system is another objective of testing, as it helps to support decision making and risk management. Verified Reference: A Study Guide to the ISTQB Foundation Level 2018 Syllabus - Springer, page 3.
質問 # 38
Which of the following is a correct reason to apply test automation?
- A. When it is cheap to buy test automation tools
- B. When it is easy to automate
- C. When there are a lot of repetitive testing tasks
- D. When a new test automation tool is launched
正解：C
解説：
A correct reason to apply test automation is when there are a lot of repetitive testing tasks. Test automation is the use of software tools or scripts to perform or support testing activities, such as test case execution, test result comparison, test data generation, etc. Test automation can be beneficial when there are a lot of repetitive testing tasks that need to be performed frequently or consistently, such as regression testing, performance testing, load testing, etc. Test automation can help to save time and effort, increase reliability and accuracy, and improve coverage and efficiency of testing. The other options are not correct reasons to apply test automation. When a new test automation tool is launched is not a reason to apply test automation, but rather a factor for choosing a test automation tool. When it is easy to automate is not a reason to apply test automation, but rather a factor for evaluating the feasibility of test automation. When it is cheap to buy test automation tools is not a reason to apply test automation, but rather a factor for estimating the cost and benefit of test automation. Verified Reference: A Study Guide to the ISTQB Foundation Level 2018 Syllabus - Springer, page 10.
質問 # 39
Which of the following statements regarding inspection is NOT true?
- A. An inspection may be led by a trained moderator who shall not be the author.
- B. An inspection shall follow a formal process based on rules and checklists with entry and exit criteria
- C. The main purpose of an inspection is to find solutions to the problems.
- D. An inspection can be performed by peers.
正解：C
解説：
An inspection is a type of review that follows a defined process with formal entry and exit criteria and roles and responsibilities for participants. An inspection can be performed by peers with different roles, such as moderator, author, reviewer and scribe. The following statement about inspection is not true:
B) The main purpose of an inspection is to find solutions to the problems. This statement is not true, as the main purpose of an inspection is to find defects or issues in a work product, not to find solutions to the problems. Finding solutions to the problems is a debugging or problem-solving activity that is usually performed by the author or developer after receiving the inspection report. The following statements about inspection are true:
A) An inspection may be led by a trained moderator who shall not be the author. This statement is true, as an inspection requires a moderator role who leads the inspection process and ensures that it follows the rules and standards. The moderator should be trained in inspection techniques and should not be the author of the work product under inspection, in order to avoid bias or conflict of interest.
C) An inspection can be performed by peers. This statement is true, as an inspection involves peer review, which means that the work product under inspection is evaluated by people who have similar roles or expertise as the author, but who are not directly involved in creating or modifying the work product.
D) An inspection shall follow a formal process based on rules and checklists with entry and exit criteria. This statement is true, as an inspection follows a formal process that consists of six main steps: planning, kick-off meeting, individual preparation, review meeting, rework and follow-up. Each step has defined rules and checklists to guide the participants and ensure consistency and quality. Each step also has entry and exit criteria to ensure that the prerequisites and objectives are met before moving to the next step. Verified Reference: A Study Guide to the ISTQB Foundation Level 2018 Syllabus - Springer, Chapter 3, page 28-29.
質問 # 40
Which of the following should be included in a test status report?
I Estimation details
II Total number of open and closed defects
III Actual effort spent
IV Defect reports
V Number of executed, failed, blocked tests
- A. III.V
- B. I. II. IV
- C. II, III.V
- D. II, III
正解：C
解説：
The following should be included in a test status report: total number of open and closed defects, actual effort spent, and number of executed, failed, and blocked tests. A test status report is a document that provides information on the results and status of testing activities for a given period or phase. A test status report should include information that is relevant, accurate, and timely for the intended audience and purpose. Some of the information that should be included in a test status report are: total number of open and closed defects, which can indicate the defect trend and defect density of the software product; actual effort spent, which can indicate the productivity and efficiency of the testing process; number of executed, failed, and blocked tests, which can indicate the test progress and test coverage of the software product. The following should not be included in a test status report: estimation details, defect reports, and impact analysis. Estimation details are not part of a test status report, but rather part of a test plan or a test estimation document. Estimation details provide information on the expected time, resources, and costs for testing activities, not on the actual results or status of testing activities. Defect reports are not part of a test status report, but rather separate documents that provide detailed information on individual defects found during testing. Defect reports include information such as defect description, defect severity, defect priority, defect status, defect resolution, etc. Defect reports can be referenced or summarized in a test status report, but not included in full. Impact analysis is not part of a test status report, but rather part of a risk assessment or prioritization process. Impact analysis provides information on the potential effects or consequences of a change or a defect on the software product or project. Impact analysis can be used to evaluate the amount or scope of testing to be performed, but not to report the results or status of testing activities. Verified Reference: A Study Guide to the ISTQB Foundation Level 2018 Syllabus - Springer, page 141.
質問 # 41
Which of the following statements about independent testing is WRONG?
- A. Independent testing is necessary because developers don't know any testing.
- B. Independent test teams may find other types of detects than developers who are familiar with the system's structure.
- C. Independent testing is best suited for the system test level.
- D. A certain degree of independence makes the tester more effective at finding defects.
正解：A
解説：
Independent testing is testing performed by a person or group that is independent of the development team. Independent testing can have various degrees of independence, ranging from testers who are part of the same organization as developers to testers who are external contractors or consultants. Independent testing can have various benefits, such as reducing bias, increasing objectivity, improving quality, or providing different perspectives. Independent testing is not necessary because developers don't know any testing, as this is a wrong and disrespectful statement. Developers can perform various types of testing, such as unit testing, component testing, or integration testing. However, independent testing can complement developer testing by providing additional levels of verification and validation, such as system testing, acceptance testing, or non-functional testing. Verified Reference: [A Study Guide to the ISTQB Foundation Level 2018 Syllabus - Springer], Chapter 2, page 16-17.
質問 # 42
A bank software has a feature of locking down accounts that have and overdraft higher than $10,000.
Due to a bug in the code, the system locks down accounts once they reached $1000 overdraft.
Based on this context, which of the following is correct statement
- A. It is an example of a defect that it goes undetected, will cause harm to the end customer and to the company (the bank)
- B. It is an example of a defect, that if goes undetected, will cause harm to the end customer but not to the company (the bank)
- C. It is an example of a defect that if goes undetected, will not cause harm to the end customer, but will cause harm to the company (the bank)
- D. It is an example of a defect that if goes undetected, will not cause any real harm to either the end customer or to the company (the bank)
正解：A
解説：
A defect is a flaw in a component or system that can cause the component or system to fail to perform its required function. A defect can cause harm to the end customer, the company, or both, depending on the impact and severity of the failure. In this case, the defect in the code causes the system to lock down accounts that have an overdraft higher than $1000, instead of $10,000. This can cause harm to the end customer, as they may lose access to their funds and face inconvenience or financial difficulties. This can also cause harm to the company, as they may lose customer trust and satisfaction, face legal issues or complaints, or incur additional costs for fixing the defect and restoring the accounts. Verified Reference: [A Study Guide to the ISTQB Foundation Level 2018 Syllabus - Springer], Chapter 1, page 3-4.
質問 # 43
A software module to be used in a mission critical application incorporates an algorithm for secure transmission of dat a.
Which review type is most appropriate to ensure high quality and technical correctness of the algorithm?
- A. Management Review
- B. Walkthrough
- C. Technical Review
- D. Informal Review
正解：C
解説：
A technical review is a type of formal review that involves a team of technical experts who evaluate a software product against a set of predefined quality criteria. A technical review is suitable for ensuring high quality and technical correctness of complex or critical software components, such as algorithms, architectures or designs. A technical review is not a walkthrough, which is an informal review led by the author of the work product. A technical review is not an informal review, which is a review that does not follow a defined process and has no formal entry or exit criteria. A technical review is not a management review, which is a type of formal review that focuses on business aspects and project progress. Verified Reference: A Study Guide to the ISTQB Foundation Level 2018 Syllabus - Springer, Chapter 3, page 29-30.
質問 # 44
For a mandatory input field "ZIP code" the following rules are given:
1 - The valid ZIP code format is 5 numeric digits.
2 - The code has to exist in the post office's official ZIP code list
Using equivalence classes partitioning, how many test cases are required to test this field?
- A. 0
- B. 1
- C. 2
- D. 3
正解：A
解説：
Equivalence classes partitioning is a technique that divides the input data and output results of a software component into partitions of equivalent data. Each partition should contain data that is treated in the same way by the component. Equivalence classes partitioning can be used to reduce the number of test cases by selecting one representative value from each partition. For the ZIP code field, there are four equivalence classes based on the given rules:
Valid ZIP code format and valid ZIP code value (e.g., 12345)
Valid ZIP code format and invalid ZIP code value (e.g., 99999)
Invalid ZIP code format and valid ZIP code value (e.g., 1234)
Invalid ZIP code format and invalid ZIP code value (e.g., ABCDE) Therefore, four test cases are required to test this field, one for each equivalence class. Verified Reference: [A Study Guide to the ISTQB Foundation Level 2018 Syllabus - Springer], Chapter 4, page 37-38.
質問 # 45
During system testing phase of a word processor, a tester finds that on opening a file from a particular set of files, which are part of a critical workflow, the word processor crashes. Which of the following is the next step the tester should take poor to recording the deviation?
- A. Send an email to the developer and not report the bug
- B. Try to recreate the incident before reporting
- C. Try to identify the code fragment causing the problem
- D. Report the incident as is without any further action
正解：B
解説：
An incident is any event that occurs during testing that requires investigation. An incident report is a document that records the details of an incident. The next step the tester should take prior to recording the deviation is to try to recreate the incident before reporting. This can help confirm that the incident is reproducible and not caused by a random or external factor. This can also help gather more information about the incident, such as the steps to reproduce it, the expected and actual results, the severity and priority of the incident, or any screenshots or logs that can illustrate the incident. Trying to identify the code fragment causing the problem is not the next step the tester should take prior to recording the deviation, as this is a debugging activity that is usually performed by developers after receiving the incident report. Sending an email to the developer and not reporting the bug is not the next step the tester should take prior to recording the deviation, as this is an informal and unstructured way of communicating incidents that can lead to confusion, inconsistency or loss of information. Reporting the incident as is without any further action is not the next step the tester should take prior to recording the deviation, as this can result in incomplete or inaccurate incident reports that can hamper the investigation and resolution of incidents. Verified Reference: A Study Guide to the ISTQB Foundation Level 2018 Syllabus - Springer, Chapter 3, page 32-33.
質問 # 46
A mid-size software product development company has analyzed data related to defects detected in its product and found out that detects fixed in earlier builds are getting re-opened after a few months.
The company management now seeks your advice in order to reverse this trend and prevent re-opening of defects fixed earlier.
What would be your FIRST recommendation to the company?
- A. Verify existing regression test suite are adequate, and augment it, if required, in order to ensure that defects fixed earlier get re-tested in each subsequent build
- B. If required, tram the teams responsible for development and testing of the modules containing maximum number of defects, and if this does not help, replace them with more knowledgeable people
- C. Automate existing test suits so that lesser time is spent on execution of each test, and more tests can be executed m the available time thus leading to a lower probability of defects slipping by
- D. Analyze the product modules containing maximum defects, and get them thoroughly tested and defects fixed as a one-time activity
正解：A
解説：
Regression testing is a type of testing that verifies that previously tested software still performs correctly after changes. Regression testing can help prevent re-opening of defects fixed earlier by ensuring that they do not cause any new failures or side effects. The first recommendation to the company is to verify existing regression test suite are adequate, and augment it, if required, in order to ensure that defects fixed earlier get re-tested in each subsequent build. This can help improve the coverage and effectiveness of regression testing and detect any regression defects as soon as possible. Automating existing test suites may also help reduce the time and effort required for regression testing, but this is not the first recommendation, as automation may not be feasible or cost-effective for all test cases. Analyzing the product modules containing maximum defects and getting them thoroughly tested and defects fixed as a one-time activity may also help reduce the defect density and improve the quality of those modules, but this is not the first recommendation, as it does not address the root cause of re-opening defects fixed earlier. Training or replacing the teams responsible for development and testing of the modules containing maximum number of defects may also help improve their skills or performance, but this is not the first recommendation, as it may not be necessary or appropriate for all teams. Verified Reference: [A Study Guide to the ISTQB Foundation Level 2018 Syllabus - Springer], Chapter 2, page 19; Chapter 4, page 45.
質問 # 47
Which ONE of the following statements about acceptance testing is NOT correct?
- A. Testing of disaster recovery and backup/restore is usually NOT part of acceptance testing.
- B. Acceptance testing is the last level of testing performed prior to system release.
- C. The customers or system users are often responsible for the acceptance testing.
- D. The main goal of acceptance testing is to build confidence in the system, not find defects.
正解：A
解説：
Acceptance testing is a level of testing performed to verify that a software product meets the agreed acceptance criteria and is acceptable for delivery. Acceptance testing is often performed by the customers or system users, who are the main stakeholders of the software product. The main goal of acceptance testing is to build confidence in the system, not find defects, as defects should have been detected and fixed in earlier levels of testing. Acceptance testing is the last level of testing performed prior to system release, unless there are any changes or fixes that require re-testing. Testing of disaster recovery and backup/restore is usually part of acceptance testing, as these are important aspects of system reliability and security that affect the customer satisfaction and trust. Therefore, statement A is not correct, while statements B, C and D are correct. Verified Reference: A Study Guide to the ISTQB Foundation Level 2018 Syllabus - Springer, Chapter 2, page 20-21.
質問 # 48
Consider the following statements about risk-based testing.
I) Risk-based testing has the objective to reduce the level of protect risks.
II) Tests should be prioritized to find tie critical detects as early as possible.
III) Non-testing activities may also help to reduce risk
IV) Risks have to be reassessed on a regular basis.
V) The project stakeholders can give useful input to determine the risks
- A. I, II and IV are true. III and V are false.
- B. II, III IV and V are correct. I is false.
- C. I III IV and V are true. II is false.
- D. II, Ill and V are true. 1 ants Iv are false.
正解：B
解説：
The following statements about risk-based testing are correct:
II) Tests should be prioritized to find tie critical detects as early as possible. Risk-based testing involves prioritizing tests based on risk level, which reflects both the likelihood and impact of defects or failures. Tests with higher risk level should be executed earlier than tests with lower risk level, in order to find and fix critical defects as soon as possible.
III) Non-testing activities may also help to reduce risk. Risk-based testing does not only involve testing activities, but also other activities that can help mitigate risks, such as reviews, inspections, audits, simulations or prototyping.
質問 # 49
Which of the following is correct with regards to debugging?
- A. Debugging identifies the cause of a failure
- B. Debugging is considered part of the testing activities
- C. Debugging is often performed by test engineers
- D. Debugging is intended to find as many defects as possible in the code
正解：A
解説：
Debugging is the process of finding, analyzing and removing the causes of failures in software. Debugging is not considered part of testing, but rather a development activity that can involve testing. Debugging is not intended to find as many defects as possible, but rather to fix the specific failure that was observed. Debugging is usually performed by developers, not by test engineers. Verified Reference: A Study Guide to the ISTQB Foundation Level 2018 Syllabus - Springer, Chapter 1, page 6.
質問 # 50
Which of the following does MOT describe a reason why testing is necessary?
- A. The customer decided that 100% branch coverage shall be achieved
- B. For avionics and pharmaceutical systems software testing is mandated by standards
- C. The acquisition of test automation tools was based on the assumption that it will be used m all projects
- D. The risks associated with delivering the system are far higher than the cost of testing
正解：C
解説：
Testing is necessary for various reasons, such as:
To detect defects and failures that may affect the quality, performance, reliability or security of a software product or system To verify that a software product or system meets its specified requirements, expectations and standards To validate that a software product or system fulfills its intended purpose and satisfies its stakeholders' needs To provide information and feedback about the status and risks of a software product or system To comply with regulations or contractual obligations that mandate testing for certain types of software products or systems The following statements describe some reasons why testing is necessary:
A) The customer decided that 100% branch coverage shall be achieved. This is a reason why testing is necessary, as it reflects a contractual obligation or a quality standard that requires testing to measure and achieve a certain level of code coverage.
C) For avionics and pharmaceutical systems software testing is mandated by standards. This is a reason why testing is necessary, as it reflects a regulation or a compliance requirement that mandates testing for certain types of software products or systems that have high safety or security risks.
D) The risks associated with delivering the system are far higher than the cost of testing. This is a reason why testing is necessary, as it reflects a risk-based approach that considers testing as an investment to reduce the probability and impact of potential failures or defects. The following statement does not describe a reason why testing is necessary:
B) The acquisition of test automation tools was based on the assumption that it will be used m all projects. This is not a reason why testing is necessary, as it reflects a business decision or a resource allocation that does not justify the need or purpose of testing. Test automation tools are not always suitable or beneficial for all projects, and testing can be performed with or without test automation tools. Verified Reference: [A Study Guide to the ISTQB Foundation Level 2018 Syllabus - Springer], Chapter 1, page 5-6.
質問 # 51
The following incident report that was generated during test of a web application.
What would you suggest as the most important report improvement?
Defect detected date: 15 8.2010
Defect detected by: Joe Smith
Test level System test
Test case: Area 5/TC 98
Build version: 2011-16.2
Defect description After having filled out all required fields in screen 1, t click ENTER to continue to screen 2 Nothing happens, no system response at all.
- A. Add information about which developer should fix the bug
- B. Add the time stamp when the incident happened
- C. Add information about which web browser was used
- D. Add an impact analysis
正解：C
解説：
The most important report improvement for the given incident report would be to add information about which web browser was used when the defect was detected. This information is relevant for reproducing and debugging the defect, as different web browsers may have different behaviors or compatibility issues with the web application. The other options are less important or irrelevant for the incident report. The developer who should fix the bug can be assigned by the project manager or the defect tracking system, not by the tester who reports the defect. The time stamp when the incident happened is not very useful, as it does not indicate the cause or the frequency of the defect. The impact analysis is not part of the incident report, but rather of the risk assessment or prioritization process. Verified Reference: A Study Guide to the ISTQB Foundation Level 2018 Syllabus - Springer, page 140.
質問 # 52
Which of the following is a function of a dynamic analysis tool?
- A. Monitor the allocation, use and de-allocation of memory during run-time of a program
- B. Provide support for release of baselines consisting of configuration items
- C. Execute programs step-by-step in order to reproduce failures and find corresponding defects
- D. Provide support for traceability of tests, test results and incidents to source documents
正解：A
解説：
A dynamic analysis tool is a tool that performs analysis of a software product based on its behavior during execution. A dynamic analysis tool can monitor various aspects of a program's run-time performance, such as memory usage, CPU load, response time, or resource leaks. A dynamic analysis tool can monitor the allocation, use and de-allocation of memory during run-time of a program, which can help detect defects such as memory leaks, buffer overflows, or memory corruption. A dynamic analysis tool cannot provide support for traceability of tests, test results and incidents to source documents, as this is a function of a test management tool. A dynamic analysis tool cannot execute programs step-by-step in order to reproduce failures and find corresponding defects, as this is a function of a debugging tool. A dynamic analysis tool cannot provide support for release of baselines consisting of configuration items, as this is a function of a configuration management tool. Verified Reference: [A Study Guide to the ISTQB Foundation Level 2018 Syllabus - Springer], Chapter 6, page 56-57.
質問 # 53
......
ISTQB-CTFL問題集で合格確定させる練習には78問があります：https://www.goshiken.com/ISTQB/ISTQB-CTFL-mondaishu.html
最新ISTQB-CTFL認証有効な試験問題集の解答をゲットせよ：https://drive.google.com/open?id=18rLXj0X17jqEqXlai2Sxe8xJGwzTM7jB