最近更新された2023年12月テストエンジン練習テストはVCS-285試験問題解答! [Q124-Q148]

Share

最近更新された2023年12月テストエンジン練習テストはVCS-285試験問題解答!

Veritas NetBackup 10.x and NetBackup Appliance 5.x Administrator認定サンプル問題と練習試験合格させます

質問 # 124
What is the minimum supported version of NetBackup for upgrading to NetBackup 10.0?

  • A. 8.2
  • B. 7.7.3
  • C. 8.1.2
  • D. 8.0

正解:A


質問 # 125
What is the role of storage unit groups in NetBackup?

  • A. To provide load balancing and failover for backup jobs
  • B. To define the physical location of the storage units in the backup environment
  • C. To specify the backup schedule for storage units
  • D. To manage the retention period and lifecycle of backup data

正解:A

解説:
Explanation
(Explanation: Storage unit groups in NetBackup enable load balancing and failover for backup jobs, by allowing you to define multiple storage units for a backup policy and specify the order in which they are used for backups.)


質問 # 126
A NetBackup appliance is not reachable from the network. What steps can be taken to troubleshoot the problem?

  • A. Check the appliance's IP address and DNS settings.
  • B. Contact Veritas Support for assistance.
  • C. Check the network connectivity to the appliance.
  • D. Restart the appliance.

正解:C


質問 # 127
What is the name of the file that contains the disaster recovery information for the NetBackup catalog?

  • A. Catalog Disaster Recovery File (CDRF)
  • B. Catalog Recovery File (CRF)
  • C. Catalog Backup File (CBF)
  • D. Catalog Image File (CIF)

正解:A


質問 # 128
A tape library had the robot firmware upgraded, and now the robot is reading the barcodes with additional characters.
How should an administrator enable NetBackup to use the same characters that were used before the firmware upgrade?

  • A. update the Barcode Rules setting
  • B. update the device mapping files
  • C. update the Media ID Generation setting
  • D. update Media settings

正解:C


質問 # 129
An administrator is using Storage Lifecycle Policies (SLP) to perform the following operations:
* back up to a local Advanced Disk pool
* duplicate to a local MSDP pool
* replicate to an off-site MSDP pool
* duplicate to an off-site tape library, which needs to be retained for three years Which retention type should the administrator select for the SLP import operation?

  • A. Target Retention
  • B. Expire after copy
  • C. Capacity Managed
  • D. Fixed

正解:A


質問 # 130
An administrator has a backup for client Linux1 using the LinuxClients policy complete successfully. Even though the policy Backup Selections are NOT modified, the backup job fails the next day with the following status code:
Error 71: none of the files in the file list exist.
What is a possible reason the job failed?

  • A. The "Enable granular recovery" option was unset.
  • B. The client was added to another backup policy.
  • C. The file systems have been unmounted on the client.
  • D. The client was temporarily shut down.

正解:C


質問 # 131
How can you manage NetBackup disk and cloud storage?

  • A. Use the NetBackup administration console to create and manage storage policies.
  • B. Use the NetBackup command line to manage storage.
  • C. Use the NetBackup administration console to allocate storage resources to backup jobs.

正解:A、C


質問 # 132
A NetBackup appliance is reporting a high CPU usage. What steps can be taken to troubleshoot the problem?

  • A. Check the appliance's memory usage.
  • B. Check the appliance's logs for errors.
  • C. Contact Veritas Support for assistance.
  • D. Restart the appliance.

正解:B


質問 # 133
What is the name of the storage unit that is used to store deduplicated data on a NetBackup media server or appliance?

  • A. Media Server Deduplication Pool (MSDP)
  • B. Media Server Deduplication Volume (MSDV)
  • C. Media Server Deduplication Unit (MSDU)
  • D. Media Server Deduplication Disk (MSDD)

正解:A


質問 # 134
An administrator has a scheduled policy that backs up 20 clients, each with multiple mount points and multiple data streams enabled. One of the jobs has failed and is in an Incomplete state in the Activity Monitor.
How should the administrator verify the incomplete job runs prior to the next scheduled backup?

  • A. run a manual job for the mount point
  • B. resume the job
  • C. resume the parent job
  • D. run a manual job for the client

正解:B


質問 # 135
Which of the following is NOT a function of Anomaly Detection?

  • A. Initiating remediation actions
  • B. Identifying potential threats
  • C. Generating alerts
  • D. Analyzing historical data

正解:A


質問 # 136
What is the name of the feature that lets you scan backup images for malware in NetBackup?

  • A. Malware Scanning
  • B. Malware Prevention
  • C. Malware Detection
  • D. Malware Protection

正解:A


質問 # 137
An administrator is adding a new media server appliance to an existing NetBackup appliance master server.
What is the correct sequence to configure the new appliance in the NetBackup domain?

  • A. configure the new media server, the configuration process automatically adds the new server to the master server
  • B. add the new media server to the master server in the Web console under Manage > Additional Servers, then configure the new media server
  • C. configure the new media server, then add the new media server to the master server in the web console under > Host properties > Media Servers > Configure Media Server
  • D. configure the new media server, then manually add the new media server to the master server's bp.conf

正解:B


質問 # 138
How should an administrator enable client-side deduplication for specific clients of a policy?

  • A. set "Disable client-side deduplication" on the policy, and select "Alwaysuse client-side deduplication" in the Client Attributes host properties
  • B. set "Disable client-side deduplication" on the policy, and select "Prefer to use client-side deduplication" in the Client Attributes host properties
  • C. unset "Disable client-side deduplication" on the policy, and select "Prefer to use client-side deduplication" in the Client Attributes host properties
  • D. unset "Disable client-side deduplication" on the policy, and select "Always use the media server" in the Client Attributes host properties

正解:C


質問 # 139
A NetBackup policy is configured to back up the following paths for a client:
D:\stage
E:\data
E:\home
F:\production
Multi-streaming is enabled for the backups, and multiplexing is set to 4. Backup streams are running slowly.
Which step should the administrator consider to improve backup performance?

  • A. back up only one stream from each physical device on the client
  • B. disable multistreaming
  • C. increase the number of data buffers
  • D. increase the multiplexing level

正解:B


質問 # 140
An administrator is experiencing a backup failure, which may be due to lack of connection between the media and master server. The status of the media server is shown below:
Media server showing offline
Which command can the administrator run to change the status of the media server?

  • A. bpminlicense
  • B. nbemmcmd
  • C. bptestbpcd
  • D. nbdb_admin

正解:B


質問 # 141
An administrator has a media server with four empty disks with the following characteristics:
SSD1, SSD2: High-speed solid-state drives
Disk3, Disk4: Medium-speed hard drives
What is the recommended disk storage configuration using these devices?

  • A. place disks in one AdvancedDisk pool with media server load balancing configured
  • B. place disks in one AdvancedDisk pool with failover configured, in the order: SSD1, SSD2, Disk3, Disk4
  • C. place disks in two AdvancedDisk pools: SSD1 and SSD2 in one pool, and Disk3 and Disk4 in the other pool
  • D. place disks in one AdvancedDisk pool with round robin configured

正解:C


質問 # 142
Backups to a storage device fail with the following error message:
Disk storage server is down (2106)
The storage server is an OpenStorage (OST) host, and the master server and media server are both acting as media servers under Credentials > Storage Servers in the NetBackup Administration Console. The disk pool is in an Up state and the storage server is in a Down state. Troubleshooting confirmed the OST plug-ins on the servers are mismatched.
Which command should an administrator use to check the plug-in version installed on the servers?

  • A. nbemmcmd
  • B. bpstsinfo
  • C. nbdevquery
  • D. bpgetconfig

正解:B


質問 # 143
Which of the following is true about the NetBackup documentation landing page?

  • A. It includes whitepapers, guides, and videos on best practices for NetBackup.
  • B. It provides a list of available training courses on NetBackup.
  • C. It only offers documentation for the latest version of NetBackup.
  • D. It provides troubleshooting advice for NetBackup users.

正解:A

解説:
Explanation
(Explanation: The NetBackup documentation landing page includes a variety of resources, including whitepapers, guides, and videos, on best practices for NetBackup, enabling users to optimize their use of the product.)


質問 # 144
Which guide should be referred to for configuring backup policies in NetBackup 10.1?

  • A. Veritas NetBackup Appliance Commands Reference Guide: v5.0
  • B. Veritas NetBackup Appliance Administrator's Guide: v5.0
  • C. Veritas NetBackup Deduplication Guide: v10.1
  • D. Veritas NetBackup 10.1 Administrator's Guide, Volume I

正解:D


質問 # 145
An administrator took media server mediaA offline for maintenance and set up a new media server mediaB with access to the previously backed up data. When restores are performed for data that was backed up by mediaA, the restores fail.
Which setting must the administrator modify to allow successful restores?

  • A. in the BAR console, change the "Server to use for backup and restores" setting to mediaB
  • B. verify both media servers are set up in the master server host properties in the "Restore Failover" section
  • C. set "Enable unrestricted media sharing for all media servers" in the master server host properties in the Media section
  • D. from the master server, run bpimage to change the host name of the media server from mediaA to mediaB

正解:B


質問 # 146
What are the security risks associated with NetBackup appliances?

  • A. Denial of service attacks
  • B. All of the above
  • C. Data loss
  • D. Data corruption

正解:B


質問 # 147
Which feature is enabled after adding a master server to the Trusted Master Servers tab?

  • A. remote console to another master server
  • B. targeted Auto Image Replication
  • C. backup of clients in other master server domains
  • D. remote catalog backups

正解:B


質問 # 148
......

認定問題集でVeritas NetBackup VCS-285ガイドで100%有効な:https://www.goshiken.com/Veritas/VCS-285-mondaishu.html