検証済みC_S4TM_2020問題集と解答で2023年最新のC_S4TM_2020をダウンロード
更新された100%カバー率リアルC_S4TM_2020試験問題で100%合格保証付いてます
SAP C-S4TM-2020試験は、SAP S/4HANAを使用した輸送管理分野における専門知識を検証するための認定テストです。この試験は、輸送計画と実行に経験があり、輸送コスト、契約、コンプライアンスを管理する責任がある個人を対象として設計されています。
質問 # 73
In a shipper-to-logistics service provider (LSP) B2B scenario, both parties are using SAP Transportation Management. Which documents are involved? Note: There are 2 correct Answers to this question.
- A. LSP's forwarding quotation
- B. Shipper's freight unit
- C. LSP's service order
- D. Shipper's freight order
正解：A、D
質問 # 74
What is used as the source location of the OTR? Please choose the correct answer.
- A. Delivery-based transportation requirements
- B. Order-based transportation requirements
- C. The shipping point determined in ERR
- D. Forwarding orders
正解：C
質問 # 75
You are using shipment-based tendering. What information is transferred from SAP TM to SAP ERP using the standard web service for transferring freight order information to SAP ERP?
- A. Tendering status
- B. Carrier
- C. Freight agreement number
- D. Shipment status
正解：A、B
質問 # 76
Which of the following statements apply to packaging units? Note: There are 2 correct Answers to this question.
- A. A packaging unit is one or more packages transported together.
- B. Packaging units cannot be assigned to transportation units.
- C. Packaging units can have a packaging hierarchy.
- D. A packaging unit is needed for each stage.
正解：A、C
質問 # 77
In an ERP system that is processing sales orders, situations arise when an order is created for a new customer that is a one time transaction. Transportation will have to be planned and this could cause a large amount of master data that will quickly become obsolete.
One-time-ship-to locations can be created in two ways, as follows:
There are 2 correct answers to this question.
- A. Manually, by the user in the forwarding order user interface
- B. Division
- C. Automatically (by the system), based on the address of an incoming transportation request to SAP TM
正解：A、C
質問 # 78
Which of the following can you determine using conditions in change management? Note: There are 2 correct answers to this question.
- A. Validity date of the rate table
- B. Rate table
- C. Freight agreement
- D. Carrier in the freight agreement
正解：B、C
質問 # 79
On which of the following documents can you calculate profitability?
- A. Forwarding order
- B. Freight unit
- C. Freight order
- D. Forwarding quotation
正解：A
質問 # 80
A large logistics service provider transports 20 packages in a full container load (FCL) consignment using its own vessel. The consignment is for 20 freight units (one transportation unit in total).
The main carriage is executed on a freight booking with nine other containers. The terminal in the port of destination only receives eight of the ten containers.
Which event handler types can you use to see if this FCL consignment was unloaded at the port of destination? There are 2 correct answers to this question.
- A. Transportation unit
- B. Freight order
- C. Handling unit
- D. Freight unit
正解：A、D
質問 # 81
Which of the following are master data elements in SAP TM? Note: There are 2 correct answers to this question.
- A. Means of transport
- B. Carrier profile
- C. Calculation sheet
- D. Calculation profile
正解：A、B
質問 # 82
Which object do you have to create in SAP ERP if you want to use handover locations? Please choose the correct answer.
- A. Warehouse
- B. Route
- C. Vendor
- D. Customer
正解：C
質問 # 83
You can determine when an output is to be issued. The following times are available: There are 3 correct answers to this question.
- A. A comprehensive management solution for progressive agro-industrial companies specifically
- B. The output is issued automatically as soon as a document is posted (transmission time-spot 4).
- C. There is a special selection program for different sales documents such as delivery and billing documents. You use it to process output online or in batches (transmission time-spot 3). You can schedule a batch to ensure regular processing (as for time 1).
- D. The output to be sent is selected by a standard program (r s n a s t o O) that is set to run at regular intervals. You decide if an output is to be selected the next time the program runs (transmission time-spot 1) or at a time specified by the user (transmission time-spot 2).
正解：B、C、D
質問 # 84
Over recent years SAP has made a significant investment in designing and building a best-in-class transportation management solution. This solution will continue to evolve as more functionality is rolled out. Currently, the solution supports the following scenarios for shippers and logistic service providers:
There are 3 correct answers to this question.
- A. For sales orders, destination locations are stored on root level.
- B. International Outbound Transportation AndOcean Freight
- C. Domestic Inbound Transportation
- D. Domestic Outbound Transportation And International Inbound Logistics
正解：B、C、D
質問 # 85
What is launched using output determination. Output condition records are configured to allow messages to be sent? Please choose the correct answer.
- A. Challenges with ease and reliability
- B. The transfer of the sales order
- C. Payment Resolution
- D. Manage complex pricing
正解：B
質問 # 86
You perform sales order scheduling for a material with enough stock on hand. Which dates on the sales order are updated by SAP TM? Note: There are 2 correct answers to this question.
- A. Material availability date
- B. Loading date
- C. Delivery date
- D. Transportation planning date
正解：B、C
質問 # 87
You want to configure transportation proposals in such a way that carrier selection is NOT executed as part of the process and the result of the process is saved in the stages of the freight unit. What do you have to define in the optimizer settings? Note: There are 2 correct Answers to this question.
- A. Planning strategy: VSR_DEF
- B. Save route and freight documents
- C. Planning strategy: VSR_1STEP
- D. Save route only
正解：A、C
質問 # 88
Which of the following SAP TM and SAP ERP objects can you map?
There are 2 correct answers to this question.
- A. SAP TM purchasing organization to SAP ERP plant
- B. SAP TM charge type to SAP ERP service material group
- C. SAP TM charge category to SAP ERP G/L account
- D. SAP TM charge type to SAP ERP service master
正解：A、D
質問 # 89
A carrier has responded to your request for quotation but was NOT automatically assigned to the freight order. What could be the reason for this? Note: There are 2 correct Answers to this question.
- A. The program to evaluate freight quotations was NOT executed.
- B. The tendering process was set to "Direct Tendering - Send Freight Order Directly".
- C. The tendering profile contains a subsequent step.
- D. The carrier responded after the response time had expired.
正解：A、D
質問 # 90
If output has been triggered successfully, two monitoring transactions are available to reveiw the status of message prcessing, as follow (2 correct answer)
- A. Monitor for prcessed XML messages
- B. TRSO
- C. Postporcessing desktop
正解：A、C
質問 # 91
Which settings can be maintained in a control key?
There are 3 correct answers to this question.
- A. TM Number
- B. Sales order Scheduling -Active
- C. Purchase order to SAP TM
- D. Outbound Delivery to SAP TM
正解：B、C、D
質問 # 92
Organizational structures can be maintained directly in SAP TM. Determine whether this statement is true or false.
- A. true
- B. false
正解：A
質問 # 93
Which transactions can you use to run the path finder? Note: there are 2 correct answers to this question.
- A. Edit freight order
- B. Carrier selection
- C. Explanation tool
- D. Transportation network cockpit
正解：C、D
質問 # 94
How can you initiate carrier selection?
Note: there are 2 correct answers to this question.
- A. From the freight booking user interface
- B. From the collaboration portal
- C. From the container unit user interface
- D. Execute report/SCMTMS/BACKGRND_PLN
正解：C、D
質問 # 95
......
SAP C-S4TM-2020 認証試験は、輸送計画、輸送実行、運賃管理、輸送分析などのトピックをカバーしています。試験に合格する候補者は、SAP S/4HANA を使用して輸送業務を効率的に計画・実行する方法について熟知しています。また、運賃コストの管理や輸送データの分析にも熟練しており、パフォーマンスの改善に役立てることができます。
SAP C-S4TM-2020は、SAP S/4HANAの輸送管理におけるSAP認定アプリケーションアソシエイトになりたい専門家の知識とスキルの評価に焦点を当てた認定試験です。この指定は、SAPの高度な輸送管理機能と関連する機能を使用する際の専門家の習熟度を示す世界的に認識されている認定です。
リアル問題集で100%無料C_S4TM_2020試験問題集を試そう：https://www.goshiken.com/SAP/C_S4TM_2020-mondaishu.html
実際のC_S4TM_2020問題集最新練習テスト問題集：https://drive.google.com/open?id=1u2TIUpkiA5FYTVEO2NuqUu04TAfXTzle