検証済みHPE7-A03問題集と解答100%合格はここにGoShiken
合格させるHPE7-A03試験一発合格保証2024問題集！
HP HPE7-A03 認定試験の出題範囲：
| トピック | 出題範囲 |
|---|---|
| トピック 1 |
|
| トピック 2 |
|
| トピック 3 |
|
| トピック 4 |
|
質問 # 11
You are designing a solution with Aruba OS10-based access points and redundant gateways and these are the requirements:
* W1-F16E based access points
* support for tunneled traffic
* application visibility
* rogue APs
* live upgrades
* Air Slice
* Cloud Guest Authentication
* Ai insights
Which licenses are needed? (Select two.)
- A. AP Advanced
- B. AP Foundation
- C. Gateway Foundation
- D. WIAN Gateway
正解：A、B
解説：
For a solution design incorporating Aruba OS10-based access points with the specified requirements, including Wi-Fi 6E support, tunneled traffic, application visibility, rogue AP detection, live upgrades, Air Slice, Cloud Guest Authentication, and AI insights, the necessary licenses are AP Foundation (Option A) and AP Advanced (Option C). The AP Foundation license provides basic connectivity and network access control features essential for establishing a Wi-Fi network. The AP Advanced license adds advanced capabilities such as application visibility and control, enhanced security features like rogue AP detection, and performance optimization features like Air Slice. These licenses together ensure the access points can deliver the full range of required functionalities, from reliable basic connectivity to sophisticated network management and security, making them suitable for a comprehensive and high-performing wireless network solution.
質問 # 12
ACME retail has 38 locations spread out across Ave US states and two provinces in Canada. They are looking to grow 20% over the next two years. They have an HO with a staff of 200 employees. The organization has eight Regional Managers and two VPs who work from home and the road. Stores typically have 17 employees on average per location.
The two warehouses have a remote loading system and 20 employees each to load the trucks and fulfill the online orders. The warehouse has 40-foot ceilings and large metal racks to store inventory. The main location is 240K sq ft (22300 st) m) and the Canadian warehouse Is 130K sq ft (12100 sq ml. The forkllfts on the loading docks are equipped with a wireless tablet on board.
A typical store Is reportedly about 60.000 sq ft (5575 sqm) and smaller stores are planned at 25.000 sq ft '2320 sq mi. The locations need to expand the abilities to vendors that need to add setup displays or Interactive kiosks in the stores. The current Infrastructure was installed In 2015 and used wireless N technology in a coverage model. The wiring is CatS. and they are unsure of the fiber connections. The inventory is all placed on the floor when it is delivered to the local store.
Inventory control is handled through Zebra barcode scanners, and they have had a lot of issues in getting signals throughout the stores and this makes monthly inventory difficult. The organization has a small help desk to troubleshoot issues that happen at the retail locations and PC support for the office. The company is looking to upgrade away from the current pbx system later this year. With the need to grow and cut costs, they are interested in moving the data to the cloud but need to get almost real-time inventory control for the online service to function.
The network has all been wired over the last ten years, but with the new systems being all wireless, they have seen the trend to offer wireless to all the vendors for their needs but also would like to allow employees, guests, and contractors all to use it. With the new IT director starting next week, the project has been set by the CTO of the company. The marketing group has asked how they can interact with the customers and get more info, while the IT support desk needs to cut staff in halt.
The. office has an MDF and two IDFs located on floors one and two. The HOF is in the basement, and you have multiple WAN circuits for the HO links. Each store has a local handoff from the cable company (Ethernet) In the middle of the store in the office, so distance for the wiring is not an issue.
The customer has budget concerns but does want something that could last 7+ years.
ACME Retail is using 4-post racks. Which rack mounting kit is better suited for this project?
- A. optional Aruba Universal 4-post Rack Mount Kit
- B. included Rack Mounting Kit
- C. optional Aruba 2-pet Rack Mount Kit
- D. optional Third Party 4-port Rack Mount Kit
正解：A
解説：
For a large multinational retail company like ACME Retail that uses 4-post racks in their network infrastructure, the most suitable rack mounting kit would be the optional Aruba Universal 4-post Rack Mount Kit. This kit is designed to provide a secure and stable mounting solution for networking equipment in 4-post rack systems, which are commonly used in enterprise environments for their robustness and ability to support heavier equipment. The Aruba Universal 4-post Rack Mount Kit is versatile and designed to fit a wide range of Aruba switches and networking devices, making it an ideal choice for ACME Retail's project, ensuring compatibility and ease of installation across their various locations.
質問 # 13
A large multinational financial institution has contracted you to design a new full-stack wired and wireless network for their new 6-story regional office building. The bottom two floors of this facility will be retail space for a large banking branch. The upper floors will be carpeted office space for corporate users, each floor being approximately 100.000 sq ft (9290 sqm). Data centers are all off site and will beout of scope for this project. The customer is underserved by its existing L2-based network infrastructure and would like to take advantage of modern best practices in the new design. The network should be fully resilient and fault-tolerant, with dynamic segmentation at the edge.
The retail space will include public guest Wi-Fi access. Retail associates will have corporate tablets for customer service, and there will be a mix of wired and wireless devices throughout the retail floors. The corporate users will primarily use wireless for connectivity, but several wired clients, printers, and hard VoIP phones will be in use.
The customer is also planning on renovating the corporate office space in order to take advantage of "smart office' technology. These improvements will drive blue-dot wayfinding. presence analytics, and other location-based services The client would like to ensure full wireless coverage in its 40 m x 40 m i 130 ft x 130 ft) auditorium during company functions while maintaining the fewest APs for aesthetic purposes WI-FI6 APs are a minimum requirement.
Which AP series would you use In the auditorium's 1.000 seats with a maximum take rate of 80%?
- A. AP515
- B. AP577
- C. AP555
- D. AP635
正解：D
解説：
The Aruba AP-635 is a Wi-Fi 6 (802.11ax) access point, designed for high-density environments such as auditoriums. It is capable of providing high throughput and efficient airtime fairness to a large number of clients, which makes it suitable for an auditorium setting with 1,000 seats and a high take rate. The AP-635's advanced capabilities, including OFDMA and MU-MIMO, allow it to handle multiple simultaneous connections efficiently, ensuring robust wireless coverage and performance during company functions, all while keeping the number of APs to a minimum to satisfy aesthetic concerns.
質問 # 14
A large multinational financial institution has contracted you to design a new full-stack wired and wireless network for their new 6-story regional office building. The bottom two floors of this facility will be retail space for a large banking branch. The upper floors will be carpeted office space for corporate users, each floor being approximately 100.000 sq ft (9290 sqm). Data centers are all off site and will be out of scope for this project. The customer is underserved by its existing L2-based network infrastructure and would like to take advantage of modern best practices in the new design. The network should be fully resilient and fault-tolerant, with dynamic segmentation at the edge.
The retail space will include public guest Wi-Fi access. Retail associates will have corporate tablets for customer service, and there will be a mix of wired and wireless devices throughout the retail floors. The corporate users will primarily use wireless for connectivity, but several wired clients, printers, and hard VoIP phones will be in use.
The customer is also planning on renovating the corporate office space in order to take advantage of "smart office' technology. These improvements will drive blue-dot wayfinding. presence analytics, and other location-based services The client decided that they would like to manage two wiring closets as a single stack with a total of 10 switches and a minimum transport speed or ?5Gbps over 0M4 MM Tiber They would also like to keep the stacking cabling cost to a minimum.
Which switch series would most economically accomplish these requirements?
- A. Aruba 6200F Switch Series
- B. Aruba6100SwitchSeries
- C. Aruba 6400 Switch Series
- D. Aruba6300F Switch Series
正解：D
解説：
The Aruba 6300F Switch Series is designed to meet the needs of modern, full-stack wired and wireless networks with a focus on cost-effectiveness, performance, and scalability. This series supports high-speed connectivity options, including 25Gbps over OM4 MM fiber, making it suitable for the client's requirement to manage two wiring closets as a single stack with a total of 10 switches. The 6300F series also offers the flexibility of modular uplinks and stacking capabilities, ensuring that the client's needs for minimum transport speed and economic efficiency are met. Additionally, the Aruba 6300F series is known for its energy efficiency and lower operational costs, further contributing to its economic value.
質問 # 15
A global cruise line company needs to refresh its current fleet. They win refresh the insides' of the ship to be cost-effective and increase their sustain ability. They Mill replace the complete WLAN/LAN hardware of the ship. In this refresh, the company will not refresh Us current security requirements. The CIO also wants to limit the number of unused ports in the switches. Future expansion will always mean a refresh of hardware.
They start with the smallest ship with a maximum of 800 guests
Each ship has a LAN infrastructure consisting of two core switches, up to 10 redundant distribution switches, and up to 500 access switches (400 cabins. 100 technical rooms). The Core switches are located in the MDF of the ship and the distribution switches are located in the IDFs of the ship. Each cabin and technical room gets one single access switch.
The cabling structure of the ship will not be refreshed. Each IDF is connected to the MDF by SMF. of which two pairs are available for the interconnect between the core and distribution. The length of SM fiber between MDF and IDF is less than 300 meters (930 ft) and the type used is 0S1. Each cabin is connected by a single
0M2 pair to the IDF. the maximum length is 60 meters (200 ft). Each technical room is connected by a single
0M2 pail to the IDF. with lengths between 100 and 150 meters (320 and 500 ft).
For each cabin/technical room the customer is looking to replace their current fan-less 2530/2540 without changing the requirements, except they need to upgrade the uplink to distribution switch to 10GbEto handle the increased network traffic, and the technical rooms need redundant power.
The WLAN infrastructure will be 1:1 refreshed without new cabling or new AP locations. Their WLAN Infrastructure is based on the 200/300 series Indoor and outdoor APs running instantOS (less than 300 APs).
the customer has no change in WLAN requirements.
The cruise line company will replace its current Internet connection before the LAN/WLAN refresh. The new Internet connection will provide a 99.8% uptime, which is needed to ensure the paid guest Wi-Fi is always operational. With this new internet connection, the CIO of the cruise line wants to base the design on the ESP architecture from Aruba because Internet connection is guaranteed.
The week after the presentation of your design to the CIO of the cruise line company, the CIO calls you to discuss increasing the security of the wired network Infrastructure. Since one of their competitors had one of their cruise ships cyber hacked, the CSO of the cruise line has mandated increased security on the wired network. They have heard about dynamic segmentation and central and decentral overlay networks.
What would you advise as the most cost-efficient solution?
- A. Standardize on Aruba 6000 switches for the access layer, add a cluster of 9240 GWs. and Implement central overlay networks on UBT basis.
- B. Standardize on Aruba 6300 switches for the access layer, add a cluster of 9240 GWs. and Implement central overlay networks on UBT basis.
- C. Standardize on Aruba 6100 switches for the access layer, add a cluster of 9240 GWs. and Implement central overlay networks on UBT basis.
- D. Standardize on Aruba 6200 switches for the access layer, add a cluster of 9240 GWs. and Implement central overlay networks on UBT basis.
正解：B
解説：
Given the need to increase the security of the wired network infrastructure while being cost-efficient, advising the cruise line company to standardize on Aruba 6300 switches for the access layer is the most appropriate solution. The Aruba 6300 Series offers advanced features suitable for such environments, including high-performance, scalability, and enhanced security capabilities. Adding a cluster of 9240 Gateways for implementing central overlay networks on a User-Based Tunneling (UBT) basis further strengthens the network's security posture. This setup supports dynamic segmentation, which allows for the enforcement of consistent policies and secure access across the network, irrespective of the user or device type. This architecture not only meets the increased security requirements set forth by the cruise line's CSO but also aligns with the company's existing infrastructure and future refresh plans, ensuring cost-efficiency and sustainability.
質問 # 16
'Don't Buy at Us' is a US-based retail company that is expanding Into Europe. They are expanding into EMEA with a regional headquarters called HQ2 inside The Netherlands.
Their US-based headquarters HQ1 was refreshed last year based on the Aruba ESP architecture. You have treated the design for HQ? based on the same design as HQ1. a two-tier architecture. The high level is shown below.
Switch BOM for this project based on Two Tier:
Collapsed Core: 2 x Aruba 8360-16Y2C in VSX (ISL 2» ICOG0E DAC)
Access Slack: 10 x Slack of Aruba 6200F 48G Class4 PoE 4SFP- 740W each stack has A members. VSF with 10GbE VSF links) 12 x 10GbE uplink pet stack) During the presentation of your design to the CTO of "Don't Buy at Us" you were informed about the changes they want you to incorporate into the updated design
1. HQ2 will include the EMEA regional distribution center (EMEA-OISTR) next to the HQ2.
2. Only two pairs of 0S1 are available between HQ2 and EMEA-DlSTR.
3. The uplinks from all access stacks need to increase to 2 x 25GbE. the fiber in HQ2 and EMEA-DI5TRI is certified for 25GbE.
4. EMEA-DlSTR needs at least 7 x stack of Aruba 48 ports switches (each stack has 4 members).
Whichanswer based on best practice is presenting the correct Switch BOM tor the updated design?
- A.
- B.
- C.
- D.
正解：D
解説：
Based on the requirements provided by "Don't Buy at Us," the updated design needs to accommodate 25GbE uplinks and a minimum of 7 stacks of 48-port Aruba switches for the EMEA-DISTR. Option C is the most suitable based on best practices, as it proposes:
* A core configuration consisting of two Aruba 8360-12C in VSX for the collapsed core with ISL of 2x100GbE DAC, which will provide robust core networking with high-speed interconnects, suitable for the demands of a regional distribution center and headquarters.
* Aggregation with two stacks, each with 2 Aruba 8360-12C in VSX (ISL 2x100GbE DAC), accommodating the uplink capacity requirements.
* Access stacks with a total of 17 stacks of Aruba 6300F 48-port 1GbE Class 4 PoE with 4-port SFP56 (each stack has 4 members, VSF with 50GbE VSF links, 2 x 25GbE uplinks per stack), which exceeds the minimum requirement of 7 stacks and provides the necessary uplink bandwidth.
This configuration supports the 25GbE uplink speeds, satisfies the required number of switch stacks for the EMEA distribution center, and is compatible with the existing 25GbE-certified fiber infrastructure at HQ2 and EMEA-DISTR.
質問 # 17
'Don't Buy at Us' is a US-based retail company that is expanding Into Europe. They are expanding into EMEA with a regional headquarters called HQ2 inside The Netherlands.
Their US-based headquarters HQ1 was refreshed last year based on the Aruba ESP architecture. You have treated the design for HQ? based on the same design as HQ1. a two-tier architecture. The high level is shown below.
Switch BOM for this project based on Two Tier:
Collapsed Core: 2 x Aruba 8360-16Y2C in VSX (ISL 2» ICOG0E DAC)
Access Slack: 10 x Slack of Aruba 6200F 48G Class4 PoE 4SFP- 740W each stack has A members. VSF with 10GbE VSF links) 12 x 10GbE uplink pet stack) During the presentation of your design to the CTO of 'Don't Buy at Us' you were informed about the updated fiber infrastructure thatDon't Buy at Us' has installed in HQ2.
The core stack is Installed in the MDF and per IOF there is one access stack installed. Based on best practice, what is the most cost-effective update to the switch BOM?
- A.
- B.
- C.
- D.
正解：D
解説：
Option B is the most cost-effective solution, as it does not include long-range optics, which are unnecessary given the distances and fiber types specified. The 10GbE-SR optics are suitable for short-range connections up to 300 meters over OM3 fiber and would cover the needs of the longest fiber run mentioned, which is 250 meters. The 10GbE-LRM optics, while capable of reaching up to 220 meters over OM2 fiber, would not be necessary as the longest OM2 run is 71 meters, which is within the range of standard 10GbE-SR optics. Thus, Option B provides the required connectivity without incurring additional costs for long-range optics that are not needed given the fiber infrastructure of HQ2.
質問 # 18
A global cruise line company needs to refresh its current fleet. They win refresh the insides' of the ship to be cost-effective and increase their sustain ability. They Mill replace the complete WLAN/LAN hardware of the ship. In this refresh, the company will not refresh Us current security requirements. The CIO also wants to limit the number of unused ports in the switches. Future expansion will always mean a refresh of hardware.
They start with the smallest ship with a maximum of 800 guests
Each ship has a LAN infrastructure consisting of two core switches, up to 10 redundant distribution switches, and up to 500 access switches (400 cabins. 100 technical rooms). The Core switches are located in the MDF of the ship and the distribution switches are located in the IDFs of the ship. Each cabin and technical room gets one single access switch.
The cabling structure of the ship will not be refreshed. Each IDF is connected to the MDF by SMF. of which two pairs are available for the interconnect between the core and distribution. The length of SM fiber between MDF and IDF is less than 300 meters (930 ft) and the type used is 0S1. Each cabin is connected by a single
0M2 pair to the IDF. the maximum length is 60 meters (200 ft). Each technical room is connected by a single
0M2 pail to the IDF. with lengths between 100 and 150 meters (320 and 500 ft).
For each cabin/technical room the customer is looking to replace their current fan-less 2530/2540 without changing the requirements, except they need to upgrade the uplink to distribution switch to 10GbEto handle the increased network traffic, and the technical rooms need redundant power.
The WLAN infrastructure will be 1:1 refreshed without new cabling or new AP locations. Their WLAN Infrastructure is based on the 200/300 series Indoor and outdoor APs running instantOS (less than 300 APs).
the customer has no change in WLAN requirements.
The cruise line company will replace its current Internet connection before the LAN/WLAN refresh. The new Internet connection will provide a 99.8% uptime, which is needed to ensure the paid guest Wi-Fi is always operational. With this new internet connection, the CIO of the cruise line wants to base the design on the ESP architecture from Aruba because Internet connection is guaranteed.
Based on the best practices, what should be recommended as the most cost-effective switch model tor the technical rooms?
- A. Aruba 6300M 12p Classd PoE and 36p Class6 PoE HPE Smart Rate 1G/2.5G/5G and 2p SOG and Zp
10G - B. HPE Aruba Networking6300M 24p HPESmart Rate 1 G/2.5G/5G/1OG Class6 PoE and 2p 50G and 2 p
25G - C. HPE Aruba Networking 6200M 24G Class- PoE 4SFP*
- D. HPE Aruba Networking 6200M 36G 12SR5 ClassG PoE 4SFP*
正解：B
解説：
For technical rooms requiring redundant power and an upgrade to 10GbE uplinks to handle increased network traffic, the most cost-effective switch model is the HPE Aruba Networking 6300M 24p HPE Smart Rate
1G/2.5G/5G/10G Class6 PoE and 2p 50G and 2p 25G. This model offers the necessary port density and speed flexibility, with support for high-power PoE devices and uplink capabilities that meet the future-proofing needs for technical rooms on the cruise ships. The switch's redundant power capabilities ensure high availability and resilience for critical technical room infrastructure, aligning with the customer's requirements for sustainability, cost-effectiveness, and preparedness for future hardware refreshes without extensive unused port capacities.
質問 # 19
What are the considerations when using existing MMF and upgrading to equipment capable of 10 GbE speeds? (Select two)
- A. single fiber tube into cabinet
- B. length of MMF fiber
- C. type of fiber connector
- D. type of MMF fiber
- E. redundant fiber tube into cabinet
正解：B、D
解説：
When upgrading existing Multimode Fiber (MMF) infrastructure to accommodate equipment capable of 10 GbE speeds, two primary considerations are the length of the MMF fiber (Option A) and the type of MMF fiber (Option C). The length of the fiber impacts the signal quality and bandwidth capacity, with longer lengths potentially requiring signal conditioning or different types of fiber to support higher speeds. The type of MMF fiber, such as OM1, OM2, OM3, or OM4, significantly affects its bandwidth capabilities and distance limitations at 10 GbE speeds. OM3 and OM4 fibers are designed to support 10 GbE transmissions over longer distances compared to OM1 and OM2, making them more suitable for upgrades to higher speeds.
Understanding these factors is crucial to ensure the existing fiber infrastructure can support the desired network performance without extensive modifications or replacements.
質問 # 20
A large multinational financial institution has contracted you to design a new full-stack wired and wireless network for their new 6-story regional office building. The bottom two floors of this facility will be retail space for a large banking branch. The upper floors will be carpeted office space for corporate users, each floor being approximately 100.000 sq ft (9290 sqm). Data centers are all off site and will be out of scope for this project. The customer is underserved by its existing L2-based network infrastructure and would like to take advantage of modern best practices in the new design. The network should be fully resilient and fault-tolerant, with dynamic segmentation at the edge.
The retail space will include public guest Wi-Fi access. Retail associates will have corporate tablets for customer service, and there will be a mix of wired and wireless devices throughout the retail floors. The corporate users will primarily use wireless for connectivity, but several wired clients, printers, and hard VoIP phones will be in use.
The customer is also planning on renovating the corporate office space in order to take advantage of "smart office' technology. These improvements will drive blue-dot wayfinding. presence analytics, and other location-based services The client would like 10 include Blue Dot location tracking in their four floors of corporate space. The APs are not Ideally placed to allow for smooth map transitions.
What could you add lo provide better tracking? (Select two.)
- A. UXI sensors
- B. more APs
- C. tags
- D. beacons
正解：B、D
解説：
For improving Blue Dot location tracking in corporate spaces where access points (APs) are not ideally placed for smooth map transitions, adding more APs and deploying beacons are effective strategies. More APs can enhance the density and coverage of the Wi-Fi network, providing more data points for more accurate location tracking. Beacons, specifically designed for precise indoor positioning, can supplement Wi-Fi-based location services by broadcasting signals that mobile devices can use to determine their location with greater accuracy.
This combination ensures better tracking and smoother map transitions within the corporate space, enhancing the overall effectiveness of the Blue Dot location tracking solution.
質問 # 21
The current IT staff is used to working with legacy Aruba OS-S (ProCurve> equipment. They are worried that they cannot handle Aruba OS-CX switches due to the different command syntax. What are two ways to make the transition easier for them? (Select two.)
- A. create aliases
- B. ASP
- C. CL1 Reference Guide for Arouba OS-CX. Aruba OS-Switch,Comware at>d Cisco IOS
- D. Aruba CU Bank
正解：A、C
解説：
To ease the transition for IT staff accustomed to legacy Aruba OS-S (ProCurve) equipment when moving to Aruba OS-CX switches, two effective approaches are creating aliases (Option A) and using the CLI Reference Guide for Aruba OS-CX, Aruba OS-Switch, Comware, and Cisco IOS (Option B). Aliases allow the creation of custom command shortcuts or mappings in Aruba OS-CX, which can mimic or resemble the commands staff are familiar with from Aruba OS-S, making the command-line interface (CLI) more intuitive for them.
The CLI Reference Guide is an invaluable resource that provides a comparative view of commands across different operating systems, including Aruba OS-CX and Aruba OS-S, helping staff understand the equivalent commands and functionalities in the new OS-CX environment. Both these tools can significantly reduce the learning curve and help the IT staff become proficient with Aruba OS-CX switches more quickly.
質問 # 22
You hired a junior engineer to assist you with a large-scale network infrastructure project. The engineer has never worked on such a complex project 'ants to better understand the role that each role that each stakeholder will play in the project.
March the stakeholder title to the responsibilities that would most likely apply to their role.
正解：
解説：
* CISO: responsible for establishing security policy and selecting security controls for the infrastructure.
* Network Design/Architecture: responsible for authoring the low-level design, and creating the configuration to meet the technical requirements.
* Network Operations: responsible for supporting, troubleshooting, and monitoring the wired/wireless infrastructure.
* Security Operations: responsible for investigating IDS/IPS incidents and managing firewalls.
質問 # 23
XYZ Regional Hospital is an integrated healthcare system of Hospitals, neighborhood health centers, and small doctor offices. XYZ Regional Hospital has recently merged with 1x neighborhood health centers and
1Z5 doctor branch offices. The wireless, wired access, and AAA solutions are outdated and need to be replaced.
XYZ Regional Hospital is looking to future-proof and improve efficiency across all sites byenhancingwired and wireless access and migrating to a centralized and unified wired/wireless and policy management that can provide uninterrupted availability of all systems.
Locations:
- XYZ Regional Hospital Is located In New York City
- Dila Health Center Is located in City A
- Mount Health Center is located In City B
- Rock Health Center is located in City C
- Branch clinics are located at different locations across the United States Requirements:
- Provide, via management software, one single pane of glass to manage wired and wireless LANs, and VPNs across campus, branch, and remote via web/cloud architecture providing near real-time insight, troubleshooting tools, and service Level performance reporting.
- Seamless integration across wired, wireless. WAN, S0-8ranch. loT
* Provide secure wireless access to all the employees of (he Regional Hospital and partners, as well as provide wireless Internet access to medical citizens when they visit our facilities.
- All-access points must support the following features and specifications: 802.1 lax (WI-FI 6E Certified)
- Security options Including WPZ/WPA3. 80Z.1 X with Radius secure authentication
- Identify and authenticate every wireless and wired device
- End-to-end role-based security
- Seamless mobility across the hospital tor medical teams, patients, and visitors
- Cuts Wi-Fi deployment times from days to hours and enables Zero-Touch deployments across the site
- Establishes a resilient, future-ready network infrastructure with the intelligence, scalability, and intuitive toolsets to meet emerging needs
- Fully redundant branch solution with dynamic path selection to the hospital XYZ Regional Hospital is looking tor an NAC solution to address its security challenges-Requirements:
- fully redundant NAC solution for management and authentication
- wireless and wired authentication for the main hospital will be handled locally
- wireless and wired authentication for the health centers will be handled locally
- wireless and wired authentication tor the clinics will be authenticated against the main hospital NAC
- staff ustrs/devices should able to visit any site and haw the same experience
- support 35k devices
Locations:
- XYZ Regional Hospital is located in City 1 - 15k devices
- Dila Health center is located in City 2 - 8k devices
- Mount Health Center is located in City 3 - 5k devices
- Rock Health Center is located in City 4 - 4k devices
-125 branch clinics are located at different locations across the US - 2k devices Which solution meets the customer's requirements?
- A.
- B.
- C.
- D.
正解：A
解説：
Option B in the provided selections outlines a configuration that includes an Aruba ClearPass Policy Manager as a Publisher for the main DC and as a Standby Publisher for the DR, with subscriber servers allocated to the main hospital and health centers. This setup is likely to match the requirement for a fully redundant NAC solution, with local handling of authentication for the main hospital and health centers, and centralized authentication for the clinics. The inclusion of VMs (Virtual Machines) as subscribers for health centers suggests scalability and flexibility for future expansion. The provision of 35k access licenses aligns with the support for 35k devices across all locations.
質問 # 24
A global cruise line company needs to refresh its current fleet. They win refresh the insides' of the ship to be cost-effective and increase their sustain ability. They Mill replace the complete WLAN/LAN hardware of the ship. In this refresh, the company will not refresh Us current security requirements. The CIO also wants to limit the number of unused ports in the switches. Future expansion will always mean a refresh of hardware.
They start with the smallest ship with a maximum of 800 guests
Each ship has a LAN infrastructure consisting of two core switches, up to 10 redundant distribution switches, and up to 500 access switches (400 cabins. 100 technical rooms). The Core switches are located in the MDF of the ship and the distribution switches are located in the IDFs of the ship. Each cabin and technical room gets one single access switch.
The cabling structure of the ship will not be refreshed. Each IDF is connected to the MDF by SMF. of which two pairs are available for the interconnect between the core and distribution. The length of SM fiber between MDF and IDF is less than 300 meters (930 ft) and the type used is 0S1. Each cabin is connected by a single
0M2 pair to the IDF. the maximum length is 60 meters (200 ft). Each technical room is connected by a single
0M2 pail to the IDF. with lengths between 100 and 150 meters (320 and 500 ft).
For each cabin/technical room the customer is looking to replace their current fan-less 2530/2540 without changing the requirements, except they need to upgrade the uplink to distribution switch to 10GbEto handle the increased network traffic, and the technical rooms need redundant power.
The WLAN infrastructure will be 1:1 refreshed without new cabling or new AP locations. Their WLAN Infrastructure is based on the 200/300 series Indoor and outdoor APs running instantOS (less than 300 APs).
the customer has no change in WLAN requirements.
The cruise line company will replace its current Internet connection before the LAN/WLAN refresh. The new Internet connection will provide a 99.8% uptime, which is needed to ensure the paid guest Wi-Fi is always operational. With this new internet connection, the CIO of the cruise line wants to base the design on the ESP architecture from Aruba because Internet connection is guaranteed.
Based on best practices, what should you recommend as the correct optic type for the connection between the IDF and the technical rooms?
- A. Aruba 106 SFP- LC LRM 220 m MMF Transceiver
- B. Aruba 106 SFP+ LC SR 300 m MMF Transceiver
- C. Aruba 100 LC BID! 40 km-0 1330/1270 XCVR
- D. Aruba 10GBASE-T SFP- RJ-45 30 m Cat6A Transceiver
正解：B
解説：
For the connection between the IDF and the technical rooms, which requires support for lengths between 100 and 150 meters (320 and 500 ft), the Aruba 10G SFP+ LC SR 300 m MMFTransceiver is the recommended optic type. This transceiver is designed for short-range multimode fiber connections and can support distances up to 300 meters, making it suitable for the specified lengths within the technical rooms on the cruise ship. The SR (Short Range) designation ensures that this transceiver is optimized for the distances involved in connecting the IDFs to the technical rooms, providing high-speed 10GbE connectivity to meet the increased network traffic demands. This choice aligns with the cruise line company's requirements for a sustainable and cost-effective network refresh that accommodates future expansion without extensive unused capacities.
質問 # 25
ACME retail has 38 locations spread out across Ave US states and two provinces in Canada. They are looking to grow 20% over the next two years. They have an HO with a staff of 200 employees. The organization has eight Regional Managers and two VPs who work from home and the road. Stores typically have 17 employees on average per location.
The two warehouses have a remote loading system and 20 employees each to load the trucks and fulfill the online orders. The warehouse has 40-foot ceilings and large metal racks to store inventory. The main location is 240K sq ft (22300 st) m) and the Canadian warehouse Is 130K sq ft (12100 sq ml. The forkllfts on the loading docks are equipped with a wireless tablet on board.
A typical store Is reportedly about 60.000 sq ft (5575 sqm) and smaller stores are planned at 25.000 sq ft '2320 sq mi. The locations need to expand the abilities to vendors that need to add setup displays or Interactive kiosks in the stores. The current Infrastructure was installed In 2015 and used wireless N technology in a coverage model. The wiring is CatS. and they are unsure of the fiber connections. The inventory is all placed on the floor when it is delivered to the local store.
Inventory control is handled through Zebra barcode scanners, and they have had a lot of issues in getting signals throughout the stores and this makes monthly inventory difficult. The organization has a small help desk to troubleshoot issues that happen at the retail locations and PC support for the office. The company is looking to upgrade away from the current pbx system later this year. With the need to grow and cut costs, they are interested in moving the data to the cloud but need to get almost real-time inventory control for the online service to function.
The network has all been wired over the last ten years, but with the new systems being all wireless, they have seen the trend to offer wireless to all the vendors for their needs but also would like to allow employees, guests, and contractors all to use it. With the new IT director starting next week, the project has been set by the CTO of the company. The marketing group has asked how they can interact with the customers and get more info, while the IT support desk needs to cut staff in halt.
The. office has an MDF and two IDFs located on floors one and two. The HOF is in the basement, and you have multiple WAN circuits for the HO links. Each store has a local handoff from the cable company (ethernet) In the middle of the store in the office, so distance for the wiring is not an issue.
The customer has budget concerns but does want something that could last 7+ years.
Based on the best practices and customer requirements, what is the correct WLAN approach?
- A. Instant OS 8 deployment
- B. Aruba OS10 AP and gateway deployment
- C. Aruba OS10 AP only deployment
- D. Aruba OS8 campus deployment
正解：A
解説：
For ACME Retail, which has multiple locations and a mix of environments including high-ceiling warehouses and retail spaces, an Aruba Instant OS 8 deployment is a suitable WLAN approach. Aruba Instant OS provides a controller-less architecture, which simplifies the deployment and management of the wireless network, especially across multiple sites. This approach enables ACME Retail to manage their entire wireless network from a single interface without the need for dedicated hardware controllers, reducing costs and complexity.
Instant OS also supports advanced features like Adaptive Radio Management and ClientMatch to ensure optimal performance in diverse environments, making it an effective solution for ACME's varied locations and requirements.
質問 # 26
......
HPE7-A03問題集完全版解答試験学習ガイド：https://www.goshiken.com/HP/HPE7-A03-mondaishu.html
リアルHPE7-A03は100%カバー率でリアル試験解答を試そう：https://drive.google.com/open?id=1_tnEtnCB1QgQ3NB2j_2ZkzB37rrtSHp6