検証済みNS0-161問題集と解答で2022年最新のNS0-161をダウンロード
更新された100%カバー率リアルNS0-161試験問題で100%合格保証付いてます
質問 27
Click the Exhibit button.
Your ONTAP 9.7 cluster failed a security audit on the management control plane. Your network security team asked you to allow only cluster1 and SVM1 management on the 192.168.1.0/24 subnet.
In this scenario, where do you apply the default-management service policy shown in the exhibit? (Choose the best answer.)
- A. firewall
- B. port
- C. LIF
- D. DNS
正解: C
質問 28
Your company has recently decided to stop using the Fibre Channel Protocol (FCP) in the data center. You are asked to decommission FCP and reuse any UTA2 ports to 10 GbE.
Which two steps are involved in this task? (Choose two.)
- A. Reboot the nodes.
- B. Remove the FCP license from all nodes in the cluster.
- C. Destroy any FC LIFs hosted on UTA2 ports.
- D. License additional phttps://www.netapp.com/pdf.html?item=/media/13482-tr4375pdf.pdforts for 10 GbE connectivity.
正解: A,B
質問 29
How many global namespaces are there in a 4-node ONTAP cluster that has a single SVM?
- A. 0
- B. 1
- C. 2
- D. 3
正解: D
質問 30
What are three types of licenses available for ONTAP? (Choose three.)
- A. system
- B. standard
- C. evaluation
- D. site
- E. field
正解: B,C,D
質問 31
An administrator is configuring a third-party software for NDMP. The application is targeting the IP of the data LIF of the SVM called "SVM1. "NDMP is configured as the SVM scope. The NDMP service is not enabled for the admin SVM. SVM1 has a user called "Tom" with the backup role. Tom can connect by using SSH to the controller with the credentials that he used to configure the third-party software. The authentication of the third-party software is falling.
In this scenario, what is the reason for the authentication failure?
- A. The NDMP password has not been generated for Tom.
- B. The user Tom does not belong to the admin SVM.
- C. The NDMP service is not enabled for the admin SVM.
- D. The application is not targeting the IP of the cluster or node management LIF.
正解: C
質問 32
Click the Exhibit button.
Referring to the exhibit, a customer is experiencing performance problems on an SVM supporting NVMe/FC.
You review the physical FC ports that are connected into the 32 Gbps switches for cluster tme-a700.
In this scenario, what is causing the performance problems? (Choose the best answer.)
- A. Port 2b has a 16 Gbps SFP+ installed.
- B. Port 2a needs a 16 Gbps SFP+ installed.
- C. Port 2b has two many LIFs running across the physical port.
- D. Port 2a needs more network interfaces added to the physical port.
正解: D
質問 33
Click the Exhibit button.
You are planning to present storage to your servers from your AFF system using FC protocol. You have a pair of FC switches to ensure connectivity and you have decided to use WWPN zoning.
Referring to the exhibit, which two WWPNs do you use for your configuration? (Choose two.)
- A. 0d WWPN
- B. fc-1 WWPN
- C. 0c WWPN
- D. fc-2 WWPN
正解: B,D
質問 34
You currently have a Cloud Volumes ONTAP instance running and need to have read/write access to a volume on an on-premises ONTAP cluster.
In this scenario, which feature do you use?
- A. Flash Cache
- B. FlexCache
- C. SnapMirror
- D. Flash Pool
正解: D
質問 35
A customer installed an ONTAP cluster. The customer wants to provide data access to host computers and end users.
Which three tasks are required? (Choose three.)
- A. Create a Quality of Service (QoS) policy.
- B. Create an SVM.
- C. Create a volume.
- D. Create an IPspace.
- E. Create a LIF.
正解: B,C,E
質問 36
When you use the default SnapMirror policy during transfer of a data protection SnapMirror relationship, what is transferred?
- A. only the existing Snapshot copies
- B. the Snapshot copy that is created by the transfer process and any existing Snapshot copies
- C. the SnapMirror license
- D. the Snapshot copy that is manually created and any existing Snapshot copies
正解: A
質問 37
You want to create a new SVM for serving NFS data using the Storage Virtual Machine (SVM) Setup wizard.
In this scenario, which object is created automatically during the setup process?
- A. a data LIF named after the SVM with the suffix_nfs_lif
- B. a data aggregate named after the SVM with the suffix_nfs_aggr1
- C. an export policy named after the SVM with the suffix_nfs_exp1
- D. a data volume named after the SVM with the suffix_nfs_vol1
正解: A
質問 38
A network administrator has configured an upstream switch for LACP. In this scenario, which action should be performed when the NetApp interface group is created?
- A. Set the distribution function to "port".
- B. Set the type to "dynamic multimode".
- C. Set the distribution function to "IP".
- D. Set the type to "static multimode".
正解: A
質問 39
Which two resources are managed by an SVM administrator? (Choose two.)
- A. Snapshot copies
- B. aggregates
- C. LUNs
- D. disks
正解: A,C
質問 40
A customer uses Active IQ Unified Manager to configure SnapMirror relationships.
In this scenario, which statement is true?
- A. Automation works directly through Active 1Q Unified Manager and later versions.
- B. Active IQ Unified Manager and OnCommand WFA have licensing dependencies.
- C. Active IQ Unified Manager uses the OnCommand WFA API.
- D. Active 1Q Unified Manager and OnCommand WFA cannot be installed on or work with the same cluster.
正解: A
質問 41
Click the Exhibit button.
You are configuring your tape backup software to authenticate to your single-node cluster by using NDMP. Referring to the exhibit, which LIF do you use to connect? (Choose the best answer.)
- A. cluster_mgmt
- B. cluster-01_mgmt1
- C. cluster1-01_ic1
- D. data_lif1
正解: C
質問 42
Click the Exhibit button.
Referring to the exhibit, which LIF role is required to copy to cloud with this NetApp Data Availability Services (NDAS) solution? (Choose the best answer.)
- A. cluster
- B. data
- C. node management
- D. intercluster
正解: D
解説:
Explanation
https://docs.netapp.com/us-en/occm/task_backup_from_onprem.html#requirements
質問 43
You want to improve the write performance of NL-SAS volumes serving data on your ONTAP. You also want to keep the performance consistent during a possible controller failover.
In this scenario, which feature do you use? (Choose the best answer.)
- A. Flash Cache
- B. FlexCache
- C. FabricPool
- D. Flash Pool
正解: D
解説:
Explanation
https://library.netapp.com/ecmdocs/ECMP1196912/html/GUID-B347C746-FD91-484D-8BA6-A23D7C05EABE
質問 44
An administrator forgot to update the cabling sheet for a core Cisco switch and cannot recall which ports were used by the NetApp FAS system.
Which command should the administrator run to obtain this information?
- A. network port broadcast-domain show
- B. network device-discovery show
- C. network interface show
- D. network port show
正解: B
質問 45
You must expand an existing FAS8200 switchless cluster to a switched cluster and add a new FAS8200 HA pair in the cluster.
In this scenario, which three actions would you perform to expand the cluster? (Choose three.)
- A. Join the new HA pair to the cluster.
- B. Ensure that the switchless-cluster network option is false.
- C. Change the cluster ports for the existing HA pair.
- D. Connect the existing nodes to the cluster switches.
- E. Ensure that the switchless-cluster network option is true.
正解: A,B,D
質問 46
A customer ordered a FAS8200 running ONTAP 9.4 with 4 TB SATA drives. You want to use the ADP features to avoid consuming the high capacity drives for the root aggregates. Before starting the initial setup of the cluster, you run the aggr statuscommand and notice that ADP is not being used. In this scenario, which boot menu option do you use to solve the problem?
- A. Option 5
- B. Option 4
- C. Option 7
- D. Option 9
正解: D
質問 47
Click the Exhibit button.
You want to add shelves to an AFF A300 HA pair that currently has six DS224C shelves already connected.
You are using the onboard SAS port only, and you want to keep the multipath high availability (MPHA) configuration.
Referring to the exhibit, what is the maximum number of additional shelves allowed to be added in this configuration? (Choose the best answer.)
- A. 0
- B. 1
- C. 2
- D. 3
正解: D
質問 48
You are using a 4-node cluster, and the node containing epsilon fails.
In this scenario, which node contains epsilon?
- A. Epsilon is automatically reassigned to a healthy node in a different HA pair.
- B. Epsilon needs to be manually assigned to the surviving node of the HA pair.
- C. Epsilon is automatically reassigned to the surviving node of the HA pair.
- D. Epsilon needs to be manually assigned to a healthy node in a different HA pair.
正解: A
質問 49
You want to prevent a single file from filling up a single constituent in a FlexGroup.
Which FlexGroup feature in ONTAP 9.7 will accomplish this task? (Choose the best answer.)
- A. Snapshot autodelete
- B. Flash Pool
- C. elastic sizing
- D. fractional reserve
正解: C
質問 50
You are the administrator of your company's ONTAP 9.7 storage system. You try to connect your vSphere hosts to a newly created NFS datastore and receive the error message shown in the exhibit.
What must you do to solve this problem?
- A. Change the volume security style to UNIX.
- B. Activate all NFS protocol versions in your SVM.
- C. Set the MTU size for the data LIF to 9000.
- D. Add the vSphere host's IP addresses to an export policy rule.
正解: A
質問 51
......
リアル問題集で100%無料NS0-161試験問題集を試そう：https://www.goshiken.com/NetworkAppliance/NS0-161-mondaishu.html