無料Oracle 1Z0-1045-21テスト練習問題試験問題集
試験準備には欠かさない！トップクラスのOracle 1Z0-1045-21試験最新版アプリ学習ガイドで練習
質問 41
Your company wants to use Replenishment Wave to maintain adequate inventory levels to meet customer demand by fulfilling customer's orders on time.
Which Replenishment Trigger Mode needs to be set up in the Replenishment Template for the following condition?
* For active Location P20A100
* Minimum Volume = 20
* Max Volume = 100
* Percentage of Max = 20%
* Length = 20, Width = 40, Height = 60
* If location P20A100 total volume goes below 20, the location is triggered forreplenishment
- A. Reactive
- B. Minimum Capacity
- C. Percentage of Max
- D. Order Based
正解: C
質問 42
You are monitoring the progress of the picking wave and notice that a rushorder needs to be picked immediately.
Which two steps should you take to complete the Picking Tasks as soon as possible? (Choose two.)
- A. Select the tasks in the Tasks UI, select Cancel Task, and re-run the wave.
- B. Select the tasks in the Tasks UI, and confirm the pick in the UI.
- C. Select the tasks in the Tasks UI, select Assignuser, and let the picker know that he/she is to select the tasks for immediate pick.
- D. Manually take the inventory from the location to the shipping area.
- E. Select the tasks and in the Tasks UI, select Change Task Priority to give the task a higher priority.
正解: B,C
質問 43
What is the primary purpose of the Wave Template Search Screen?
- A. to determine how many picking tasks will be waved for picking
- B. to identify all outbound loads that have not completedpicking yet
- C. to determine from which part of the warehouse theinventory will be allocated
- D. to determine the locked locations for inventory allocation
- E. to determine which available orders will be waved for picking
正解: A
質問 44
You have hired a new employee to do picking in the warehouse. The employee complains that he/she cannot work because the RF Picking transactions is notdisplayed as one of the RF options.
Which two scenarios will cause the transaction to be missing as an RF option in the user's menu? (Choose two.)
- A. The employee has forgotten his/her password.
- B. The employee is assigned to the "Supervisor" group.
- C. The employee's email is not set up in his/her user profile.
- D. The RF Picking transaction is not associated with her/his group's assigned RF Menu.
- E. The employee's Group has a blank RF Menu.
正解: D,E
質問 45
You are performing the Split IB LPNs RF transaction and seeing an error message: Shipment Verification status mismatch.
Which three are valid? (Choose three.)
- A. The from-IBLPN and the to-IBLPN might be received against the same ASN.
- B. This error message will disappear if the RF screen parameter required-validations is set up as No Validation.
- C. This error message will disappear if the RF screen parameter split-uom is left bank.
- D. The from-IBLPNand the to-IBLPN might be received against two different ASNs respectively.
- E. If the to-IBLPN is received via the Recv Shipment RF transaction, the from-IBLPN might be from the Create RF transaction.
正解: A,B,C
質問 46
Your warehouse isdivided into two large areas, Area A and Area B, which store different products. You have set up your wave to allocate inventory from only Area A, but when the wave is run, both Area A and area B have allocated items.
What caused the issue?
- A. Allocation zone was not specified in the shipping order.
- B. Allocation zone was not specified in the task selection criteria.
- C. In the Allocation Mode, "Restrict Allocation Zone" was set to Area B.
- D. In the Allocation Mode, "Restrict Allocation Zone" was not specified.
- E. The locations in Area A have excessive cycle count tasks against them.
正解: B
質問 47
Your customer wants to use Advance Shipment Notification (ASN) created in WMS Cloud System for receiving without RF gun and expects ASN to be verified.
What are the two steps to complete the ASN receiving and verification transaction? (Choose two.)
- A. Verifythe IB shipment
- B. Create an ASN from the IB license plate screen
- C. Assign a dock door to IB shipment
- D. Create a Blind IB plate number and palletize after receiving
- E. Create a Blind IB plate number and cartonize before receiving
正解: C,D
質問 48
Your customer wants to Putaway LPN to Location by using the Putaway Rules and link the location with the Replenishment Zone.
Which four configurations are required? (Choose four.)
- A. Set Replenishment Zone for Active Location.
- B. Set Criteria for Putaway Rules.
- C. Putaway Type is set at Facility Level.
- D. Set the Location Size Type at Facility Level.
- E. Putaway Priority and Rules are setat Facility Level.
- F. Set Replenishment Zone for Reserve Location.
正解: A,C,D,E
質問 49
Which three interface validations cause the Advance ShipmentNotifications (ASN) to fail when uploading to WMS Cloud? (Choose three.)
- A. ASN data is past the shipping date.
- B. PurchaseDetail line and ASN Detail line do not match in WMS Cloud.
- C. ASN file has invalid data format.
- D. A Purchase Order that is referenced on the ASN doesn't exist in WMS Cloud.
- E. ASN Qty and Purchase Qty do not match in WMS Cloud.
正解: B,C,E
質問 50
Which statement is true regarding Replenishment Rules?
- A. Replenishment Rules created at Parent company view can be edited at Child company view.
- B. Replenishment Rules are used for defining Wave Template.
- C. Replenishment Rules areused for Inventory movement between two warehouses.
- D. Replenishment Rules are only editable at the company level in which it was created.
正解: B
質問 51
In which two ways can you execute the detail cycle count of LPN Detail by sku scan? (Choose two.)
- A. using "Cycle Cnt" screen with screen parametercontent-countset to "sku-scan"
- B. using "Resv Nbr Cnt" screen and with screen parametercontent-countset to "sku-scan"
- C. using "Cycle Cnt"screen with screen parameter content-count set to "Null"
- D. using "Cycle count for LPN deffered/immediate updates" with screen parametersku scan modeset to
"By Sku Scan"
正解: C,D
質問 52
A user is using the PackNC transaction to pack into a blind OBLPN. The user needs to pick up 10 units for Item 000234, but after picking up four units the OBLPN is full.
What should the user do?
- A. short the remaining units
- B. end the LPN
- C. move to the next location
- D. scan the next order
正解: B
質問 53
Which three configurations are required to sort the SKU A and B while receiving? (Choose three.)
- A. Putaway Type should be configured for the SKU.
- B. An IB Shipment Type should be created to receive Purchase Order with sort SKUs.
- C. BreakRule with Criteria needs to be set for the Sorting Rule.
- D. Receive Station Location for Sorting should be created and mapped with the Sorting Rule.
- E. The Locations Size type should be defined for eachReceive Station Location.
- F. Use Custom Field in Vendor UI to map the item that needs to be sorted.
正解: A,B,F
質問 54
Which five combinations of lot and expiry date are valid scenarios in WMS Cloud? (Choose five.)
- A. An item is lot-tracked but not expiry-date-tracked.
- B. Two IB LPNs of the same item have different lots and the same expiry dates.
- C. The IB LPNs have an item with the same lot and different expiry dates.
- D. Two IB LPNsof the same item have the same lot and the same expiry date.
- E. An item is expiry-date-tracked but not lot-tracked.
- F. Two IB LPNs of the same item have different lots and different expiry dates.
正解: A,C,D,E,F
質問 55
Select the two data formats supported by Oracle WMS Cloud with its built-ininterfaces and APIs. (Choose two.)
- A. EDI
- B. Delimited Flat File
- C. XML
- D. JSON
- E. pdf
正解: B,C
質問 56
Select two configurations required to fulfill a Cross Dock order. (Choose two.)
- A. The Replenishment template is required to replenish Cross Dock Order
- B. Module Parameter should be enabled on the RF Receive Screenfor receiving Cross Dock ASN
- C. Wave template should be configured to allocate Cross Dock Order
- D. IB Shipment Type should be defined for Cross Dock ASN
- E. The Cross Dock Outbound Order type should be defined
正解: A,D
質問 57
Item X has product life as 40 days and % Acceptable as 40%. You are doing receiving for your company via RF and today is Sep. 15th, 2017. The receiving transaction that you use to receiveItem X has left the screen parameter allow-rem-exp-override blank, and has the screen parameter allow-inv-exp-override set to on.
Identify two valid facts. (Choose two.)
- A. When you communicate to the RF that the expiry date of Item X is Oct.20th, 2017, and there's an existing inventory of Item X whose expiry date is Oct.4th, the system will allow to receive it.
- B. Expiry date is the only date value that you can enter via receiving transactions, but it is optional based on the items configuration.
- C. When you communicate to the RF that the expiry date of Item X is Sep. 30th, 2017, the system will allow you to receive it.
- D. When you communicate to the RF that the expiry date of Item X is Oct. 25th, 2017, the system will allow you to receive it.
- E. When you communicate to the RF that the expiry date of Item X is Oct. 10th, 2017, the system will allow you to receive it.
正解: B,C
質問 58
Identify the type offunctions you need to use to handle conditional information in a report.
- A. Arithmetic and Geometric Functions
- B. Dynamic Functions
- C. String Functions
- D. Logical Functions
- E. WMS BI Cloud does not support that type of functionality
正解: D
質問 59
Your company has two facilities, one in California, and the other in New Jersey.
The California facility needs to exclusively check the quality of each item on receiving whereas the New Jersey one need to exclusively performValue-Added Service (VAS) on each unit during receiving and shipping.
Identify the Location Types that are required to be defined in the Oracle WMS Cloud to receive the items at the California Facility.
- A. Reserve and VAS
- B. Reserve andQC
- C. Active and Reserve
- D. Active and VAS
正解: C
質問 60
Which two REST API actions are supported by Oracle WMS Cloud? (Choose two.)
- A. GET
- B. RECEIVE
- C. SEND
- D. DELETE
- E. POST
正解: A,E
質問 61
Which Inventory screen should you use to configure the Inventory Adjustment Code in Oracle WMS Cloud?
- A. Items
- B. IB LPNs
- C. Reason Codes
- D. Inventory Lock Codes
正解: C
質問 62
Which two data conditions on the Outbound Order will always result in unsuccessfulcross-dock allocations in WMS Cloud? (Choose two.)
- A. The quantity of the item on the Outbound Order is less than the quantity of the item on the LPM being received.
- B. The quantity of the item on the Outbound Order is greater than the quantity of the item on the LPN being received.
- C. The quantity of the item on the Outbound Order is exactly equal to the quantity of the item on the LPN being received.
- D. The item on the Outbound Order is a batch tracked item.
- E. The item on the Outbound Order does not match the item on the LPN being received.
正解: A,E
質問 63
You are theinventory control superuser of a warehouse and need to audit all the cycle count activities done by the operators before they are communicated to the host system from WMS Cloud.
You are responsible for the cycle count functionality configuration of the warehouse as well. This warehouse was newly bought by your company.
Your company is a 3PL and this new warehouse will be used for a new client of your company. Which four tasks do you need to complete? (Choose four.)
- A. Set the company parameterINVN_ADJ_APPROVAL_REQUIREDto yes foryour company.
- B. Create a Cycle Count RF screen with the parameterauto-approve-modeset to on.
- C. Set the facility parameterINVN_ADJ_APPROVAL_REQUIREDto yes for the new warehouse.
- D. Set the company parameterINVN_ADJ_APPROVAL_REQUIREDto yes for the company that you are configuring.
- E. Audit the Pending records in the Cycle Count Adjustment screen.
- F. Create a Cycle Count RF screen with theparameterauto-approve-modeset to off.
正解: A,B,C,E
質問 64
Identify two scenarios in which the user can select the "Release Pick Info" option in the Wave Inquiry UI togenerate the wave information for MHE systems. (Choose two.)
- A. after wave picking has started for all allocations (alloc_qty>packed_qty, but packed_qty>0)
- B. packed_qty not evaluated when sending Wave Pick Info
- C. after wave picking has started, but some allocations have not been picked yet (allocations having packed_qty=0)
- D. if all the lines are picked (if allocations packed qty=alloc qty) for all the allocations
- E. if picking has not started for the wave
正解: A,C
質問 65
Identify three valid statements related to IB Sorting. (Choose three.)
- A. IB Sorting is done based on Putaway Priority.
- B. IB Sorting is done after Putaway
- C. IB Sorting is done before Putaway
- D. IB Sorting will group SKUs with different Putaway typeand build in a single pallet
- E. IB Sorting can be done by Manual and System driven method
正解: A,D,E
質問 66
......
今すぐ1Z0-1045-21問題を使おう1Z0-1045-21問題集PDF：https://www.goshiken.com/Oracle/1Z0-1045-21-mondaishu.html