無料SAP C_TS414_2023学習ガイド試験問題と解答
C_TS414_2023試験問題集、C_TS414_2023練習テスト問題
質問 # 36
The Customer info record: SD defines inspection requirements. For which specific combination can you maintain this info record? Note: There are 2 correct answers to this question.
- A. Customer and Sales Organization
- B. Customer, Material, and Distribution Channel
- C. Customer, Material, and Division
- D. Customer, Material, and Sales Organization
正解：A、D
解説：
The quality info record: SD (transaction QVDM) specifies QM requirements for outbound deliveries:
* Customer and Sales Organization (A): This combination allows generic inspection settings for a customer across a sales organization, a valid standard option.
* Customer, Material, and Sales Organization (B): This is the most specific combination, enabling material-specific inspection requirements for a customer within a sales org (SPRO > QM > Quality Inspection > Quality Info Record: SD).
* Customer, Material, and Division (C): Division isn't a key field for the SD info record in standard SAP.
* Customer, Material, and Distribution Channel (D): Distribution channel isn't part of the key; sales org is used instead.
Thus, "A" and "B" are the correct answers.References: SAP Help Portal - "Quality Info Record: SD"; SAP S
/4HANA QM User Guide - "SD Quality Management".
質問 # 37
You are using the SAP Fiori app "Record Inspection Results" in the quality inspection. Which process steps are supported by this app? Note: There are 3 correct answers to this question.
- A. Add unplanned inspection operations
- B. Assign documents and links to an inspection characteristic
- C. Add unplanned inspection characteristics
- D. Add inspection method to an inspection characteristic
- E. Add remarks to an inspection characteristic
正解：B、C、E
解説：
The SAP Fiori app "Record Inspection Results" (App ID: F2170) supports:
* Add Unplanned Inspection Characteristics (B): Users can add unplanned characteristics (e.g., as complete or incomplete copies) to an operation during recording, enhancing flexibility.
* Add Remarks to an Inspection Characteristic (C): The app allows adding comments or notes to characteristics, supporting documentation (visible in the characteristic details).
* Assign Documents and Links to an Inspection Characteristic (D): Documents (e.g., via DMS) or links can be attached to characteristics in the app for reference.
* Add Unplanned Inspection Operations (A): Operations are predefined in the plan; the app doesn't support adding new operations.
* Add Inspection Method to an Inspection Characteristic (E): Methods are assigned in planning, not dynamically in the app.
Thus, "Add unplanned inspection characteristics," "Add remarks to an inspection characteristic," and "Assign documents and links to an inspection characteristic" are the correct answers.References: SAP Help Portal -
"Record Inspection Results Fiori App"; SAP S/4HANA QM User Guide - "Fiori Apps".
質問 # 38
You create a supplier claim notification with reference to material document year, number and item from a goods receipt for the PO What information is copied to the notification?
Note : 3 correct answer
- A. Purchasing document number and item
- B. Advanced Shipping number
- C. Material number
- D. Inspection lot number
- E. Quantity and unit
正解：A、C、E
質問 # 39
To what can you assign the inspection method in the inspection planning? Note: There are 2 correct answers to this question.
- A. Selected set
- B. Work center
- C. Inspection characteristic in an operation of an inspection plan
- D. Master inspection characteristic
正解：C、D
解説：
Inspection methods in SAP S/4HANA QM (transaction QK01) define how an inspection is performed and can be assigned to specific objects in inspection planning:
* Master Inspection Characteristic (B): In the MIC master data (transaction QS21/QS23), you can assign an inspection method to specify the procedure (e.g., "Visual inspection"). This is a standard assignment to ensure consistency across plans.
* Inspection Characteristic in an Operation of an Inspection Plan (D): Within an inspection plan (transaction QP01), you can assign an inspection method directly to a characteristic in an operation.
This overrides or supplements the MIC's method if needed, providing flexibility during planning.
* Selected Set (A): Selected sets (transaction QS51) are for qualitative codes, not for assigning inspection methods.
* Work Center (C): Work centers define where an inspection occurs but do not directly accept inspection method assignments in standard SAP QM.
Thus, "Master inspection characteristic" and "Inspection characteristic in an operation of an inspection plan" are the correct answers.References: SAP Help Portal - "Inspection Methods in QM"; SAP S/4HANA QM User Guide - "Inspection Planning".
質問 # 40
You want to print a certificate for an outbound delivery, at which level is a certificate printed?
- A. Delivery Item level
- B. Shipping point level
- C. Delivery header level
- D. material level
正解：A
質問 # 41
In which business object do you set whether the supplier must provide a quality certificate and the type of quality certificate that is required?
- A. Business partner
- B. Purchase order
- C. Quality info record: Procurement
- D. Material master
正解：C
解説：
The requirement for a supplier to provide a quality certificate and its type is configured in:
* Quality Info Record: Procurement (D): In the quality info record (transaction QI01), you set the
"Certificate Required" indicator and specify the "Certificate Type" (e.g., "ISO 9001") under the
"Certificate Data" section. This links the requirement to a specific material-supplier combination, enforced during GR (SPRO > QM > Quality Inspection > Quality Info Record).
* Purchase Order (A): POs inherit certificate settings from the quality info record, not define them.
* Material Master (B): The QM view defines inspection types, not certificate requirements or types.
* Business Partner (C): Supplier master data lacks QM-specific certificate settings.
Thus, "Quality info record: Procurement" is the correct answer.References: SAP Help Portal - "Quality Info Record in QM"; SAP S/4HANA QM User Guide - "Certificate Management".
質問 # 42
By integrating the QM component in the production process, you can monitor and document process capability and the quality of products.
Which statistical and graphical tools does SAP provide to monitor a process ?
- A. Quality management inspection data interface QM-ID
- B. Statistical report charts
- C. Statistical process controls (SPC)
- D. Quality management information system
正解：C
質問 # 43
When creating an operation step in an inspection plan , which of the following is mandatory?
- A. Activity type
- B. Control key
- C. Work centre
- D. Standard text
正解：B
質問 # 44
Which of the following dynamic modification criteria can be used in the inspection plan? Note: There are 3 correct answers to this question.
- A. Material and supplier
- B. Material
- C. Material and work center
- D. Material and customer
- E. Material and equipment
正解：A、B、D
解説：
Dynamic modification in SAP S/4HANA QM allows the system to adjust inspection scopes (e.g., skip lots, reduced inspection) based on quality performance. These criteria are defined in the inspection plan (transaction QP01) or Quality Level settings and determine when modification occurs:
* Material and Supplier (A): This is a standard dynamic modification criterion (e.g., for inspection type
01 - Goods Receipt). It tracks quality history for a material-supplier combination, commonly used in procurement scenarios (SPRO > Quality Management > Quality Inspection > Dynamic Modification).
* Material and Customer (D): Used in sales or production scenarios (e.g., inspection type 10 - Delivery), this criterion adjusts inspections based on material-customer quality history, ensuring customer-specific requirements are met.
* Material (E): A standalone material criterion is valid across multiple inspection types (e.g., 03 - Production), allowing modification based solely on the material's quality history, regardless of supplier or customer.
* Material and Work Center (B): Work centers are linked to operations, not directly to dynamic modification criteria in standard SAP QM. This is not a predefined option.
* Material and Equipment (C): Equipment is relevant for plant maintenance (PM), not a standard QM dynamic modification criterion for inspection plans.
Thus, "Material and supplier," "Material and customer," and "Material" are the correct answers, reflecting standard SAP functionality.References: SAP Help Portal - "Dynamic Modification in QM"; SAP S/4HANA QM Customizing Guide - "Dynamic Modification Rules".
質問 # 45
To which of the following quality management basic data can you assign documents from the document management system (DMS)? Note: There are 2 correct answers to this question.
- A. Sampling procedures
- B. Codes from code groups
- C. Master inspection characteristics
- D. Inspection methods
正解：C、D
解説：
The Document Management System (DMS) in SAP S/4HANA allows users to link documents (e.g., PDFs, drawings, or instructions) to various objects to provide additional context or instructions. In Quality Management, certain basic data objects support this integration natively:
* Inspection Methods (A): Inspection methods define how an inspection is performed (e.g., a test procedure). You can assign DMS documents to inspection methods to provide detailed instructions or reference materials (e.g., a calibration guide). This is configured in the inspection method master data (transaction QK01/QK02) where a document link field is available.
* Master Inspection Characteristics (D): Master inspection characteristics (MICs) define what is being inspected (e.g., length, weight). DMS documents can be assigned to MICs to include specifications, diagrams, or tolerances directly in the master data (transaction QS21/QS23). This is a standard feature to enhance inspection planning and execution.
* Codes from Code Groups (B): Codes and code groups are used for qualitative valuations (e.g., defect types). They do not have a direct field for DMS document assignment in their master data (transaction QS41/QS51), making this option incorrect.
* Sampling Procedures (C): Sampling procedures determine how samples are drawn (e.g., fixed sample size). While critical to inspection planning, they do not support direct DMS document assignment in standard SAP configuration (transaction QDV1/QDV2).
Thus, the correct answers are "Inspection methods" and "Master inspection characteristics," as both support DMS integration without additional customization.References: SAP Help Portal - "Document Management in QM"; SAP S/4HANA QM Configuration Guide - "Basic Data for Quality Management".
質問 # 46
Which of the following SAP Fiori apps can be used for usage decisions at the end of inspection lot processing? Note: There are 2 correct answers to this question.
- A. Manage Quality Level
- B. Manage Usage Decisions
- C. Quality Engineer Overview
- D. Quality Technician Overview
正解：B、D
解説：
SAP Fiori apps in QM support usage decisions (UD):
* Manage Usage Decisions (A): App ID F2171 is specifically designed for recording and managing usage decisions for inspection lots, a direct tool for this task.
* Quality Technician Overview (B): App ID F2173 provides an overview and includes options to perform UD, supporting technicians in lot processing.
* Quality Engineer Overview (C): App ID F2174 focuses on analytics and planning, not direct UD execution.
* Manage Quality Level (D): App ID F2172 manages quality levels (e.g., skip lots), not UD itself.
Thus, "Manage Usage Decisions" and "Quality Technician Overview" are the correct answers.References:
SAP Help Portal - "Fiori Apps for QM"; SAP S/4HANA QM User Guide - "Usage Decision Apps".
質問 # 47
Which of the following can you set up in a certificate profile for outgoing quality certificates? Note: There are
2 correct answers to this question.
- A. The print layout
- B. The inspection operations to be executed
- C. The characteristics to be inspected
- D. The print sequence of characteristics
正解：A、D
解説：
Certificate profiles for outgoing certificates (transaction QC01) define certificate content:
* The Print Sequence of Characteristics (A): In the certificate profile, you set the order of characteristics (e.g., MICs or class characteristics) to appear on the certificate (SPRO > QM > Quality Certificates > Outgoing > Define Certificate Profiles).
* The Print Layout (C): The profile links to a form (e.g., via SAPscript or Smart Forms), defining the layout of the printed certificate.
* The Characteristics to be Inspected (B): Characteristics are selected, not inspected, within the profile; inspection occurs in lots.
* The Inspection Operations to be Executed (D): Operations are part of plans, not certificate profiles.
Thus, "The print sequence of characteristics" and "The print layout" are the correct answers.References: SAP Help Portal - "Certificate Profiles for Outgoing Certificates"; SAP S/4HANA QM User Guide - "Quality Certificates".
質問 # 48
In the material master, at which organizational level do you create Quality management (QM) data for inspection type.
- A. Business area level
- B. Plant level
- C. Client level
- D. Company code level
正解：B
質問 # 49
Which categories of defects can be created using standard SAP Fiori apps? Note: There are 3 correct answers to this question.
- A. Warehouse defect
- B. Production defect
- C. Generic defect
- D. Supplier defect
- E. Customer defect
正解：B、D、E
解説：
Standard SAP Fiori apps (e.g., "Record Defects," App ID F2175) support defect categories tied to QM processes:
* Supplier Defect (A): Linked to procurement (e.g., inspection type 01), recordable via apps for supplier- related issues.
* Production Defect (B): Tied to production lots (e.g., type 03/04), a standard category in Fiori defect recording.
* Customer Defect (D): Associated with customer complaints (e.g., notification type Q1), supported in apps.
* Generic Defect (C): Not a specific standard category; defects are context-specific.
* Warehouse Defect (E): Typically stock-related (type 08), not a distinct Fiori category.
Thus, "Supplier defect," "Production defect," and "Customer defect" are the correct answers.References: SAP Help Portal - "Defect Recording Fiori Apps"; SAP S/4HANA QM User Guide - "Defect Categories".
質問 # 50
You define a priority type in the implementation guide (img) and assign it to a notification type. When you enter a priority during creation of notification, what can the system do?
- A. Send one or more e-mails to involved partners
- B. Calculate the notification start and finish dates.
- C. Create one or more task automatically
- D. Start workflow to inform the responsible person(s)
正解：B
質問 # 51
When creating a process order, what type of task list is primary used for inspection ? Correct 3
- A. Equipment
- B. master recipe
- C. Routings
- D. Reference rate routing
正解：B、C、D
質問 # 52
During results recording, you can create additional inspection characteristics for the inspection operation.
Which characteristics can be used as additional inspection characteristics? Note: There are 2 correct answers to this question.
- A. Master inspection characteristics as reference characteristic
- B. Master inspection characteristics as incomplete copy model
- C. Master inspection characteristics as complete copy model
- D. Class characteristics from the classification system
正解：B、C
解説：
During results recording (e.g., transaction QE51N), additional characteristics can be added to an operation:
* Master Inspection Characteristics as Complete Copy Model (B): MICs (transaction QS21) can be added as a complete copy, inheriting all attributes (e.g., tolerances, sampling) for immediate use in the lot.
* Master Inspection Characteristics as Incomplete Copy Model (C): MICs can be added as an incomplete copy, allowing customization (e.g., adjusting tolerances) during recording, a flexible option in SAP QM.
* Master Inspection Characteristics as Reference Characteristic (A): Reference MICs are linked for reuse but not added anew during recording; they're predefined in the plan.
* Class Characteristics from the Classification System (D): Class characteristics (transaction CT04) are for batch classification, not inspection recording.
Thus, "Master inspection characteristics as complete copy model" and "Master inspection characteristics as incomplete copy model" are the correct answers.References: SAP Help Portal - "Adding Characteristics in Results Recording"; SAP S/4HANA QM User Guide - "Inspection Results".
質問 # 53
you can assign combination of material number and plants to one inspection plan Which organization structure must the plants share for correct cost collection in the inspection handlings ?
- A. Company code
- B. Purchase organization
- C. Sales organization
- D. Controlling Area
正解：D
質問 # 54
You have created a customer business partner in Sales and Distribution. What are some of the options available for an outbound quality inspection? Note: There are 2 correct answers to this question.
- A. The inspection occurs after release of the sales order
- B. The inspection occurs after creation of the sales order
- C. The inspection is skipped
- D. The inspection occurs before the goods issue is posted
正解：C、D
解説：
Outbound quality inspections (e.g., inspection type 10) in Sales and Distribution (SD) occur for deliveries:
* The Inspection is Skipped (A): If no inspection type (e.g., 10) is active in the material master or quality info record: SD, the inspection can be skipped, a valid option in standard SAP.
* The Inspection Occurs Before the Goods Issue is Posted (D): For inspection type 10, the inspection lot is created with the delivery (before goods issue, transaction VL02N), allowing inspection before stock is moved (standard process).
* After Release of the Sales Order (B): Inspections are tied to deliveries, not sales order release.
* After Creation of the Sales Order (C): Inspection lots are not created at SO creation; they require a delivery.
Thus, "The inspection is skipped" and "The inspection occurs before the goods issue is posted" are the correct answers.References: SAP Help Portal - "Outbound Inspections in QM"; SAP S/4HANA QM User Guide -
"SD Integration".
質問 # 55
During an in process inspection for production orders, such as inspection type 09, which inventory posting is possible?
- A. Blocked stock
- B. Quality stock
- C. None
- D. Unrestricted Stock
正解：C
質問 # 56
You post a goods receipt for a purchase order item. A quality certificate is mandatory for the material, but no goods receipt inspection lots should be created. What will happen if the required certificate is not provided?
- A. The goods receipt is posted to unrestricted use stock
- B. The goods receipt is posted to blocked stock
- C. The missing certificate is escalated
- D. A quality notification is created automatically
正解：B
解説：
When a quality certificate is mandatory (set in the quality info record, transaction QI01) but no GR inspection lot is created (inspection type 01 inactive in the material master), the system handles the missing certificate as follows:
* The Goods Receipt is Posted to Blocked Stock (B): If the certificate is required (e.g., "Certificate Check" active in QI01) and not received (transaction QC55), the GR (transaction MIGO) posts the material to blocked stock (movement type 103/105 process). This is standard behavior to prevent unrestricted use until the certificate is confirmed, even without an inspection lot (SPRO > QM > Quality Certificates > Procurement > DefineControl Keys).
* Unrestricted Use Stock (A): This would occur only if no certificate check was enforced, contradicting the premise.
* Quality Notification Created Automatically (C): Notifications require manual creation or specific Customizing (e.g., defect recording), not automatic generation here.
* Missing Certificate Escalated (D): Escalation is not a standard SAP term or process in this context; it implies custom workflow not present in standard QM.
Thus, "The goods receipt is posted to blocked stock" is the correct answer.References: SAP Help Portal -
"Certificate Processing at Goods Receipt"; SAP S/4HANA QM User Guide - "Stock Posting".
質問 # 57
Which of the following are features of the clean core dashboard? Note: There are 2 correct answers to this question.
- A. It can be accessed by using SAP For Me
- B. It can be used in all SAP S/4HANA Cloud editions
- C. Customers can use the dashboard in the dev, test, and production tenants
- D. Customers can grant access to the dashboard to partners
正解：A、C
解説：
The clean core dashboard in SAP S/4HANA monitors system adherence to clean core principles:
* Customers Can Use the Dashboard in the Dev, Test, and Production Tenants (B): The dashboard is available across all system tenants (development, test, production) to assess clean core status universally.
* It Can Be Accessed by Using SAP For Me (C): SAP For Me (customer portal) provides access to the clean core dashboard, a standard entry point as of 2025.
* Customers Can Grant Access to Partners (A): Partner access isn't a standard feature; it's customer- controlled.
* It Can Be Used in All SAP S/4HANA Cloud Editions (D): Primarily for Cloud Private Edition and Public Cloud, not guaranteed for all editions (e.g., on-premise specifics vary).
Thus, "Customers can use the dashboard in the dev, test, and production tenants" and "It can be accessed by using SAP For Me" are the correct answers.References: SAP Help Portal - "Clean Core Dashboard"; SAP S
/4HANA Cloud User Guide - "SAP For Me".
質問 # 58
......
最新のC_TS414_2023実際の無料試験問題は更新された82問があります：https://www.goshiken.com/SAP/C_TS414_2023-mondaishu.html
検証済みC_TS414_2023問題集PDF資料 [2026年更新]：https://drive.google.com/open?id=1DFonraTAxSF_aDkzwbXlBgcHY0xnMpQ0