100%無料D-VXR-OE-23試験問題集リアルDell Hyperconverged Infrastructure問題集194解答を掴み取れ！
あなたを余裕でD-VXR-OE-23試験合格させます！100%試験高合格率保証 [2024]
質問 # 23
What is a consideration when expanding a vSAN disk group in a VxRail cluster?
- A. Deduplication and compression must be disabled for the disk group
- B. At least one capacity disk must be added along with a cache disk
- C. vSAN performance will be negatively impacted during expansion
- D. vSAN licensing must be applied to the VxRail cluster
正解：B
質問 # 24
Which level of data protection can be configured across sites in a VxRail Stretched Cluster?
- A. RAID 1
- B. RAID 6
- C. RAID 1/10
- D. RAID 5
正解：A
質問 # 25
Which API call asks the VxRail Manager to apply partial modification to a resource?
- A. GET
- B. PATCH
- C. POST
- D. PUT
正解：B
質問 # 26
A VxRail administrator wants to put a node into maintenance mode with the 'Ensure accessibility' option.
Which fault tolerance method delays the host from promptly entering maintenance mode?
- A. No data redundancy
- B. Mirroring
- C. Any FTT=2 or greater policy
- D. Erasure coding
正解：A
質問 # 27
A company has bought VxRail V Series appliances with PCle network cards.
How can the PCle NIC ports be configured in VxRail for data traffic?
- A. Create new Standard or DV switch and add these NICs as uplinks to carry both vMotion and VM network traffic
- B. During initial VxRail setup the NIC ports would be configured automatically to carry both vMotion and VM network traffic
- C. Create new Standard or DV switch and add these NICs as uplinks to carry VM network traffic
- D. During initial VxRail setup the NIC ports would be configured automatically to carry VM network traffic
正解：C
質問 # 28
As a VxRail administrator, you discover that one of the nodes in your cluster has a hardware issue Dell EMC support will be arriving to replace the node. You have a vCenter Standard license on this vCenter. You need to place the node into maintenance mode, and migrate the data prior to replacement.
Which migration option should you use?
- A. Ensure data accessibility from other hosts
- B. Evacuate all data to other hosts
- C. DRS will automatically handle the migration
- D. No data evacuation
正解：B
質問 # 29
Using the VxRail Plugin, what does VxRail administrator use to compare the current component version state against the expected component version state?
- A. Health Monitoring
- B. Skyline Reports
- C. Compliance Reports
- D. VxRail VxVerify
正解：C
質問 # 30
The VxRail administrator has been given the task of migrating the current production environment to a VxRail cluster with external block storage. The VMs must remain online during the migration.
Which VMware feature can be used?
- A. VMware Converter Software
- B. Storage vMotion
- C. vMotion
- D. High Availability
正解：B
質問 # 31
What are all the actions that can be performed from the Node Information panel of the Physical View of a VxRail E series node?
- A. Replace Disk
Shutdown Host - B. Add Disk
Shutdown Host
Enable Chassis LED - C. Replace Disk
Shutdown Host
Enable Chassis LED - D. Add Disk
Enable Disk LEDs
正解：B
質問 # 32
A VxRail administrator observes alarms that start with VXR... in the vSphere client.
How should the administrator find detailed information about the alarms and related knowledge-base articles?
- A. Refer to the VxRail Event Code Reference
- B. Click the Ask Dell EMC link in the Triggered Alarms page
- C. Click the KB link in the Alarm Definitions page
- D. Refer to the VxRail Administration Guide
正解：A
質問 # 33
Match each management component with its characteristic.
正解：
解説：
質問 # 34
Which VxRail model series supports only hybrid disks?
- A. P Series
- B. E Series
- C. S Series
- D. G Series
正解：D
質問 # 35
What is the default VLAN ID for internal management network traffic on VxRail?
- A. 0
- B. 1
- C. 2
- D. 3
正解：A
質問 # 36
Which user interface provides remote power control (power on and power off) for VxRail E Series nodes?
- A. IPM/BMC
- B. VMware vSphere Web Client
- C. iDRAC
- D. VxRail Manager
正解：C
質問 # 37
What is the correct path for editing the Object Repair Time from the vCenter client?
- A. Host > Monitor > vSAN > Services > Object Repair Timer (Repeat for each host)
- B. Host > Configure > vSAN > Services > Advanced Options > Edit (Repeat for each host)
- C. Cluster > Configure > vSAN > Services > Advanced Options > Edit
- D. Cluster > Monitor > vSAN > Services > Object Repair Timer
正解：C
質問 # 38
An administrator has logged into their VxRail cluster and noticed that all nodes are in a disconnected state. Upon logging into individual nodes, all workloads are running and no services have been affected. The licensing applied to the cluster is still in Evaluation mode. The administrator sees an unused vSphere License Key.
What steps should the administrator follow to properly license the cluster?
- A. Select Administration > Licensing > Licenses > Assets > vSAN Clusters, and Assign License.
- B. Select Administration > Licensing > Licenses, and apply a valid license key.
- C. Select Administration > Licensing > Licenses > Add > Enter License Keys.
- D. Select Administration > Licensing > Licenses > Synchronize Licenses.
正解：B
質問 # 39
What is used in the VxRail infrastructure to manage multiple clusters of ESXi servers?
- A. ESXi
- B. Host client
- C. VxRail Manager
- D. vCenter
正解：D
質問 # 40
......
学習材料は有効D-VXR-OE-23効率的問題集：https://www.goshiken.com/EMC/D-VXR-OE-23-mondaishu.html
D-VXR-OE-23問題集本日限定！無料アクセス可能に！：https://drive.google.com/open?id=1w3YDU-LwR2P86oDzNIlAE6xMIgwg-skj