100%無料HPE0-S22試験問題集リアルHPE Master ASE Advanced Server Solutions Architect V3問題集98解答を掴み取れ！
あなたを余裕でHPE0-S22試験合格させます！100%試験高合格率保証 [2022]
HP HPE0-S22 認定試験の出題範囲：
| トピック | 出題範囲 |
|---|---|
| トピック 1 |
|
| トピック 2 |
|
| トピック 3 |
|
| トピック 4 |
|
| トピック 5 |
|
| トピック 6 |
|
質問 56
An architect is designing an HPE Apollo 6000 solution to support a customer application. The architect is choosing between the HPE ProLiant XL230a and the XL250a compute tray.
What is one reason for choosing the XL250a tray?
- A. The application uses high amounts of memory.
- B. The application requires high storage capacity.
- C. The application requires GPU acceleration.
- D. The application is single-threaded.
正解: C
質問 57
A customer needs high performance computing (HPC) and a small-scale solution with up to eight processors. The solution should also provide storage in a modular form factor. The customer's HPC application is designed so that some nodes act as compute nodes while others act as storage nodes that serve data to the compute nodes.
Which HPE Apollo system is most appropriate for this situation?
- A. HPE Apollo r2800
- B. HPE Apollo 6000
- C. HPE Apollo 8000
- D. HPE Apollo r2200
正解: A
解説:
The Apollo r2200 and r2800 would both be a possible candidate with 4 x dual CPU servers, but the request is that some nodes must be compute nodes and some must be data nodes. The r2200 has fixed disks to every node, whereas the r2800 can be flexible e.g. 2 nodes with two disk drives and two nodes with 4 disk drives.
質問 58
A customer has an HPE c7000 chassis with the following components installed:
- Cisco Fabric Extender
- Fibre channel pass-through modules
- BL460c Gen9 blades with LPe1605
The architect needs to allow network bandwidth control for some of the customer's critical servers and serverto- server communication for vMotion.
Which modification should the architect recommend?
- A. Replace the Cisco Fabric Extender with HPE FlexFabrix 20/40 F8 modules
- B. Change the QoS setting on the Fibre Channel pass-through modules
- C. Change the setting within the Onboard Administrator to enable QoS
- D. Replace the Fibre Channel pass-through modules with HPE Virtual Connect 16Gb modules
正解: A
質問 59
A customer needs high performance computing (HPC) and a small-scale solution with up to eight processors. The solution should also provide storage in a modular form factor. The customer's HPC application is designed so that some nodes act as compute nodes while others act as storage nodes that serve data to the compute nodes.
Which HPE Apollo system is most appropriate for this situation?
- A. HPE Apollo 6000
- B. HPE Apollo r2200
- C. HPE Apollo r2800
- D. HPE Apollo 8000
正解: B
質問 60
A customer has a large Oracle-based ERP solution that runs on HPUX and multiple rx2800 i2 servers. The customer plans to move to an open source solution to reduce operating expenses. The customer needs the ability to deliver incremental capacity and needs to avoid incremental Oracle licensing costs.
Which HPE Server solution will help meet the customer's needs?
- A. HPE Apollo 4500 System
- B. HPE Apollo 6000 System
- C. HPE BladeSystem c7000 with BL460GGen9 Servers
- D. HPE Superdome X
正解: D
質問 61
An architect is proposing a solution that has two HPE Moonshot 1500 chassis, each of which is full of m700 cartridges. The customer needs the solution to quickly deploy the OS to cartridges, back up a golden node image, and clone the image.
The customer is concerned about cost and is not interested in managing or monitoring performance of the solution.
Which solution meets these requirements?
- A. HPE Insight Control server provisioning (ICsp)
- B. HPE Insight Cluster Management Utility (CMU)
- C. HPE Intelligent Provisioning (IP)
- D. HPE OneView 2.0
正解: B
解説:
Explanation
質問 62
A customer plans to add a high performance computing system capable of hard partitioning to a data center that employs HPE StoreServ 7000.
Which solution should the architect include in the design?
- A. an HPE Apollo 2000 system with iSCSI connectivity to the HPE 3PAR system
- B. an HPE Moonshot system with iSCSI connectivity to the HPE 3PAR system
- C. an HPE SuperdomeX with Fibre Channel connectivity to the HPE 3PAR storage
- D. an HPE Apolo6000 with Fibre Channel connectivity to the HPE 3PAR storage
正解: C
質問 63
Which network infrastructure components should an architect consider when recommending 40GbE in a server solution?
- A. Multimode cables will all need to be replaced by single mode cables
- B. Cables will need to be replaced by multi strand MPO cables
- C. OM4 cables can be reused for all runs out to the maximum of 300 meters
- D. OM2 cables can be reused for runs of 50 meters or less
正解: B
解説:
Explanation/Reference:
質問 64
A customer recently purchased an HPE Moonshot chassis to host its internal website. Subsequently, the customer reports difficulties deploying new cartridges in an efficient manner. The customer suggests exchanging the solution for a more traditional server platform.
What can the architect demonstrate to the customer to help solve the problem while preserving the validity of the original design solution?
- A. how to use SCCM to provide a graphical installation method for new nodes
- B. how to use iLO remote console to provide a graphical installation method for new nodes In order to interface with the specific server cartridge node, the mRCA must be installed in a specific slot within the chassis, relative to the linking server cartridge.
- C. how to add an mRCA module to provide a graphical installation method for new nodes
- D. how to use VSP to provide a graphical installation method for new nodes
正解: C
質問 65
An architect is planning an HPE Moonshot solution with m710p cartridges. The customer's application requires cartridge nodes to connect to a NAS. The customer's current infrastructure supports 10GbE. In the future, the customer plans to upgrade the fabric between the HPE Moonshot and the NAS solution to support
40GbE.
Which switch modules and uplink modules should the architect recommend to meet both the current and future needs?
- A. HPE Moonshot 180G Switch Modules and HPE Moonshot 16-SFP+ Uplink Modules
- B. HPE Moonshot 45XGc Switch Modules and HPE Moonshot 4-QSFP+ Uplink Modules
- C. HPE Moonshot 45XG Switch Modules and HPE Moonshot 16-SPF+ Uplink Modules
- D. HPE Moonshot 180G Switch Modules and HPE Moonshot 4-QPPF+ Uplink Modules
正解: B
質問 66
A customer has a mixed environment based on the G6, G7, Gen8, and Gen9 ProLiant server blades. The customer is interested in implementing HPE OneView but needs to understand security and monitoring mechanisms for different server generations.
Which statement most accurately describes different platform support in HPE OneView?
- A. WBEM Providers will be used for any server managed by HPE OneView.
- B. HPE OneView can manage G7, Gen8/Gen9 servers, while G6 servers can only be monitored.
- C. The customer can select from different management protocols between SNMP v2 and SNMP v3 to match the security requirements.
- D. All servers managed by HPE OneView will use WBEM Providers, but collected data must be translated to the SNMP traps using embedded WMI Mapper.
正解: A
質問 67
A customer plans to use Insight Control server provisioning and HPE OneView for vCenter Server. The vCenter Server manages one c7000 enclosure with 16 server blades running VMware ESXI.
Which licensing option should the architect include in the proposal?
- A. one Insight Control server provisioning license for each managed server
- B. one Insight Control server provisioning license for each managed server blade and one HPE OneView for vCenter Server license for the entire c7000 enclosure
- C. one HPE OneView Advanced license for each managed server
- D. one HPE OneView Standard license for each managed server and one HPE OneView for vCenter Server license for the c7000 enclosure
正解: B
質問 68
View the Exhibit.
Refer to the exhibit. A customer has an HPE c7000 enclosure managed by HPE OneView with HP BL460c Gen9 servers in a vSphere cluster. The customer has multiple vLANs trunked from the top of rack (TOR) switches to the Virtual Connect modules in the enclosure. Due to network Access Control List (ACL) requirement and guidelines from the networking department, all network traffic should be forced to an upstream switch using the Virtual Connect "Private Network" feature.
The customer reports slow network response.
Which modification can the architect recommend to improve network performance?
- A. Put the vMotion network in a separate uplink set and disable "Private Network".
- B. Change the FlexFabric 20/40 adapter modules with Flex 10/100 modules.
- C. Remove the Management network from the uplinks.
- D. Change the FlexFabric adapter modules with Flex-10 adapter modules.
正解: B
質問 69
Which statement describes the availability metrics for an HPE system's high availability?
- A. A system with an availability of 99.99% can be expected to be inoperational for 6 minutes or fewer per year.
- B. A system with an availability of 99.999% will statistically not have an unscheduled downtime of more than 1 hour total in 10 years of operation.
- C. A system consisting of HPE standard servers with an availability of 99.9999% and a storage with an availability of 99.99% will have a combined availability of 99.99999%.
- D. All standard HPE servers are designed for 99.9999% availability.
正解: C
質問 70
An architect is planning an HPE Apollo 4530 solution to support the Cloudera distribution of Spark and HDFS. Each HPE ProLiant XL450 in the solution uses the following baseline recommendations:
- 15 8TB HDDs (120TB total)
- 2 10-core 2.3GHz processors
- 128GB memory (64GB on each processor)
- 2-port 10GbE FlexibleLOM
The architect has planned enough servers to meet the customer's requirements for total capacity.
Which two components in this plan are most likely to cause a bottleneck as an increasing number of Spark applications run?
- A. processor and memory
- B. drive capacity and memory
- C. drive type (HDD versus SSD) and drive capacity
- D. adapter bandwidth and processors
正解: B
質問 71
A customer has a large Oracle-based ERP solution that runs on HPUX and multiple rx2800 i2 servers. The customer plans to move to an open source solution to reduce operating expenses. The customer needs the ability to deliver incremental capacity and needs to avoid incremental Oracle licensing costs.
Which HPE Server solution will help meet the customer's needs?
- A. HPE Apollo 4500 System
- B. HPE BladeSystem c7000 with BL460G Gen9 Servers
- C. HPE Apollo 6000 System
- D. HPE Superdome X
正解: D
解説:
Explanation/Reference: https://www.hpe.com/h20195/v2/GetPDF.aspx/4AA6-5294ENN.pdf (page 5)
質問 72
When designing a Superdome X configuration for a customer, which storage configuration should the architect choose?
- A. booting from a local direct attached SSD disk and a mezzanine TOE N/W port for user data accessing an MSA 2040 using iSCSI
- B. booting from a local direct attached SSD disk and a mezzanine FC port for user data storage on an MSA
2040 - C. one mezzanine FC port on one nPar dedicated for booting from an MSA 2040 and an additional FC port for user data
- D. a single mezzanine FC port in each nPar for common access to all volumes on an HPE 3PAR StoreServ
正解: D
質問 73
View the Exhibit.
Refer to the exhibit. A customer has an HPE c7000 enclosure managed by HPE OneView with HP BL460c Gen9 servers in a vSphere cluster. The customer has multiple vLANs trunked from the top of rack (TOR) switches to the Virtual Connect modules in the enclosure. Due to network Access Control List (ACL) requirement and guidelines from the networking department, all network traffic should be forced to an upstream switch using the Virtual Connect "Private Network" feature.
The customer reports slow network response.
Which modification can the architect recommend to improve network performance?
- A. Put the vMotion network in a separate uplink set and disable "Private Network".
- B. Change the FlexFabric 20/40 adapter modules with Flex 10/100 modules.
- C. Remove the Management network from the uplinks.
- D. Change the FlexFabric adapter modules with Flex-10 adapter modules.
正解: B
質問 74
An architect needs to demonstrate the financial advantages of a proposed HPE server and
Hypervisor-based solution compared to a legacy server environment that has traditional servers and desktops.
Which tool should the architect use?
- A. HPE Business Technology Optimization
- B. Client Virtualization ROI Calculator
- C. HPE Business Process Monitor
- D. Hyperscale Business Value Calculator
正解: D
質問 75
An architect is designing a data center solution that contains an HPE BladeSystem for the virtual application, infrastructure, and VDI environment. It also contains an HPE Moonshot for the web servers.
In which parts of the HPE Transformation Area does this solution fit?
- A. empower and protect
- B. enable and empower
- C. transform and protect
- D. transform and empower
正解: D
質問 76
A proposed solution includes the HPE Moonshot-4QSFP+ Uplink Modules. The customer informs the architect that the planned purchase of 40GbE switches has been postponed. The customer still intends to purchase
40GbE switches within a year, but in the meantime, existing 10GbE switches will be used. These switches are HPE network switches located 25 meters from the location of the racks that house the HPE Moonshot Solution.
The customer needs 30Gb/s bandwidth.
Which action should the architect recommend to allow the customer to deploy the solution immediately and easily take advantage of 40GbE when deployed later?
- A. Add QSP+/SFP+ adaptor kits to the design
- B. Replace the QSFP+ transceivers with SFP+ transceivers
- C. Swap in HPE Moonshot-16SFP+ Uplink Modules
- D. Replace the DAC cables with DAC splitter cables
正解: A
質問 77
......
学習材料は有効HPE0-S22効率的問題集：https://www.goshiken.com/HP/HPE0-S22-mondaishu.html