[2022年01月29日]700-905認定ガイド問題と解答トレーニング [Q14-Q37]

[2022年01月29日]700-905認定ガイド問題と解答トレーニング

700-905認定お試しセット最新700-905のPDF問題集

Cisco 700-905 認定試験の出題範囲：

トピック	出題範囲
トピック 1	HyperFlex products and services by attending training
トピック 2	SE is responsible for defining and engineering related deliverables required to deploy the proposed customer solutions
トピック 3	SE handles pre-sales and post-sales engineering related customer plan Technical project management
トピック 4	Implement and operate functions Developments in the hyperconverged infrastructure market and Cisco HyperFlex solutions
トピック 5	Identifying staffing requirements, making kickoff meeting presentations Sales team interactions during all product deployment phases

質問 14
How many vCPUs does the HXDP controller VM require?

A. 0
B. 1
C. 2
D. 3

正解: B

質問 15
What is the minimum amount of memory required for an HX node?

A. 128 GB
B. 64 GB
C. 32 GB
D. 192 GB

正解: A

解説:

質問 16
There are often disadvantages when using mixed hardware, and uniform systems are highly advised. What are three disadvantages of using validated yet mixed hardware? (Choose three.)

A. "Hardware only" solutions require less latency for data aggregation.
B. Validated yet "mixed" hardware systems may be supported by the specific original equipment manufacturers but software vendors require a master level services agreement.
C. "Software only" solutions can result in a lack of simplicity for installation and maintenance. While setup and maintenance of an HCI solution might be simple you still need to configure and maintain the hardware part, which is not orchestrated by the HCI solution.
D. "Software only" HCI solutions often mean that HCI vendors do not have control over the hardware that the consumer is using. The lack of control over the hardware can result in hardware not being security-compliant (usually the case with white box solutions) or not being optimally configured for the given HCI solution.
E. "Software only" solutions are inherently more secure, adhering to government regulations.
F. Validated hardware does not mean smooth performance, which particularly applies to hardware that is seldom chosen for the hardware part of the "software only" solution.

正解: C,D,F

解説:

質問 17
Which two results are expected when you replace a node or expand a cluster? (Choose two.)

A. Distributed pooled data is migrated off nodes to master data store.
B. Affected node is marked as unhealthy and placed into standby mode
C. On node replace, the self-healing must finish for the cluster to be healthy
D. vSphere DRS migrates the virtual machines to the new node to balance the load
E. The cluster profile is updated and RAID takes care of rebalancing the load.

正解: C,D

解説:

質問 18
A Controller Virtual Machine (CVM) is an Ubuntu Linux VM that lives outside the converged data platform on the housekeeping drive since it is involved in creating the convergence data platform Which two features tor CVMs are valid? (Choose two.)

A. an Ubuntu based VM running in the control space of each individual server, having linear access to the server's VMs and networking controls
B. does not perform caching, deduplication: and compression of data
C. is installed automatically by the HyperFlex installer, configured through the installer
D. needs network access to ESXi. other CVMs, and management network
E. creates hooks tor services related to third-party abstraction applications

正解: C,D

解説:

質問 19
Drag the server type from the left onto the maximum number of capacity drives on the right.

Which three capabilities are provided by Virtual Interface Cards'? (Choose three.)

A. Traffic processing for internal and external communication supporting simultaneous HBA and NIC
operation on the same physical hardware.
B. Management through Cisco IMC or UCS Manager with dynamic configuration of virtual interface cards
based on the server profile (MAC/WWN).
C. Multiple-interface-card virtualization without any additional driver requirements with integration of the
virtualized cards into the Fabric Interconnect infrastructure.
D. A virtual environment, such as VMware vSphere, provides VM connectivity via a virtual switch to
individual virtual machines bypassing local hardware requests.
E. Virtualizing object storage environments by pushing meta data directly to the management server
F. The virtual interfaces created by a VIC do not accommodate hypervisor communication like VMkernel
interfaces on vSphere.

正解: B,C,D

質問 20
Refer to the exhibit. Which VIC model supports two wire connectivity to each Fabric Interconnect?

A. VIC 1227
B. VIC 1557
C. VIC 1457
D. VIC 1387

正解: D

解説:

質問 21
HyperFlex is tightly integrated Into the Cisco portfolio, allowing which two powerful service integrations''
(Choose two)

A. Multi-cloud integration Workloads are able to seamlessly migrate to platforms such as Amazon Web
Services: Microsoft Azure and Google Cloud Platform
B. Data Center Network Monitor: This management platform enables administrators to monitor storage In
the HyperFlex solution and provide real-time storage performance for the HyperFlex cluster
C. Cloud mobility: CloudCenter enables workload mobility between HyperFlex and public and private
clouds, Including private cloud self-service Infrastructure as a service (laaS) capabilities
D. On-premise container platform: Cisco Container Platform automates repetitive tasks, such as installing
Kubernetes and Docker, installing analytics tools, creating
clusters, load balancing, curatmg the OS. and even updating the distribution
E. Application centric infrastructure: ACI enables faster deployment via End-Point Group integration of
the HyperFlex clusters into existing application environments

正解: A,C

質問 22
What does the letter W indicate when selecting CPUs for your HX Node (le. HX-CPU 8170M)?

A. support for NVMe
B. support for 768 TB/socket of memory
C. support for all flash drive array
D. support of 1.5 TB/socket of memory

正解: D

質問 23
How many DIMMs are supported per memory channel in the Cisco UCS M5 server?

A. 0
B. 1
C. 2
D. 3

正解: C

質問 24
In all HX server types, where are capacity drives installed?

A. side
B. top
C. back
D. front

正解: D

質問 25
Cisco HyperFlex AII-NVMe nodes are expected to be supported beginning in which HXDP version'?

A. HXDP 3 5.2
B. HXDP 3.5.1
C. HXDP 4.0
D. HXDP 4.0.1

正解: D

質問 26
When cabling a given HX node to the Fabric Interconnect which three actions are required?
(Choose three.)

A. Connect the node to the same port number on each of the two Fabric Interconnects.
B. Connect port 2 on the VIC to Interconnect B
C. Connect the node to different port numbers on each of the two Fabric Interconnects.
D. Connect server port L2 to Fabric Interconnect port L2
E. Connect server port L1 to Fabric Interconnect port L1.
F. Connect port 1 on the VIC to Fabric Interconnect A.

正解: A,B,F

解説:

質問 27
Which two steps should be performed before installing HyperFlex? (Choose two.)

A. Determine and download virtual machine OS! required
B. Determine and download recommended installer OVA version required
C. Download service profile templates
D. Complete the pre-installation checklist.
E. Determine and download recommended hypervisor

正解: B,D

質問 28
How much memory is reserved for the controller VM in the HX220c?

A. 78 GB
B. 12 GB
C. 48 GB
D. 24 GB

正解: C

質問 29
HyperFlex uses file system native snapshots and provides which three features? (Choose three.)

A. on datastore level, snapshots work the same as vSphere snapshots
B. automatic update to the golden image when a configuration change is made
C. impact on the VM performance after a lot of writes, requiring future administration
D. consolidation of snapshots is still manual but not necessary
E. automatically deduplicating data of snapshots through StorFS
F. limitations in age and number of snapshots. See user manual for limitations

正解: A,B,E

質問 30
Which two ways does Cisco HyperFlex upgrade the traditional RAID? (Choose two.)

A. Hardware replacement initiates self-healing with minimal impact
B. Eliminating the need for additional hardware cards, while maintaining high performance.
C. HyperFlex enables stretched RAID arrays spanning multiple geographic sites.
D. Limiting the number of drives locally, which are not a part of the shared datastore.
E. Distributing data locally, not just across the hosts in HyperFlex cluster

正解: A,B

解説:

質問 31
There are often disadvantages when using mixed hardware, and uniform systems are highly advised. What are
three disadvantages of using validated yet mixed hardware? (Choose three.)

A. "Software only" HCI solutions often mean that HCI vendors do not have control over the hardware that
the consumer is using. The lack of control over the hardware can result in hardware not being
security-compliant (usually the case with white box solutions) or not being optimally configured for the
given HCI solution.
B. "Hardware only" solutions require less latency for data aggregation.
C. "Software only" solutions can result in a lack of simplicity for installation and maintenance. While setup
and maintenance of an HCI solution might be simple you still need to configure and maintain the
hardware part, which is not orchestrated by the HCI solution.
D. "Software only" solutions are inherently more secure, adhering to government regulations.
E. Validated yet "mixed" hardware systems may be supported by the
specific original equipment manufacturers but software vendors require a master level services
agreement.
F. Validated hardware does not mean smooth performance, which particularly applies to hardware that is
seldom chosen for the hardware part of the "software only" solution.

正解: B,E,F

質問 32
If a GPU card is Installed in HyperFlex nodes before a cluster is created, which action can be used to
automatically build the service profile in UCS Manager?

A. Check Run UCS Manager Configuration during the cluster creation process
B. Check the GPU workflow during the cluster creation process
C. Check the extended memory option during the cluster creation process
D. Check the administrative workflow option during the cluster creation process

正解: B

質問 33
Which two results are expected when you replace a node or expand a cluster? (Choose two.)

A. Affected node is marked as unhealthy and placed into standby mode
B. vSphere DRS migrates the virtual machines to the new node to balance the load
C. On node replace, the self-healing must finish for the cluster to be healthy
D. Distributed pooled data is migrated off nodes to master data store.
E. The cluster profile is updated and RAID takes care of rebalancing the load.

正解: C,D

質問 34
Which version of HXDP was the first to support multiple VICs on a single server?