[2022年03月03日]GoShiken 301問題集でF5 Networks Certification Study Materials合格確定させる練習問題集
F5 301実際にある問題とブレーン問題集
質問 13
Which two statements are true concerning capabilities of current BIG-IP platforms?
(Choose two.)
- A. All current BIG-IP platform use both an ASIC. And CPU(s)to process traffic.
- B. Only 2U BIG-IP Platform have an option of a second power supply.
- C. All current BIG-IP platform can perform hardware compression.
- D. All BIG-IP have capacity to perform bulk encryption I decryption of SSL traffic independent of the CPU.
- E. The 1600 hosts more ports than the 3900.
正解: A,D
質問 14
Which statement is true regarding OneConnect processing?
- A. Server-side request can utilize existing client-sid connections.
- B. Client-side request can utilized existing server-side connections.
- C. The number of client connection is reduced.
- D. The virtual server must have UDP profile.
正解: B
質問 15
A monitor has been defined using the HTTP monitor template. The send and receive strings were customized, but all other settings were left at their defaults. Which resources can the monitor be assigned to?
- A. most pools
- B. most virtual severs
- C. only specific pool members
- D. most nodes
正解: A
質問 16
When a pool is created and saved to file, where is the default file and location for the pool configuration? When a pool is created and saved to file, where is the default file and location for the pool configuration?
- A. lconfig/bigip.conf
- B. /etc/bigip_base.conf
- C. /config/bigip_base.conf
- D. /config/BigDB.dat
正解: A
質問 17
A BIG-IP has the following objects configured: A SNAT pool with 2 members:
150.10.33.33 and 10.10.1.33 A load-balancing pool with 5 members:
10.10.1.1-10.10.1.5:80
The BIG-IP has two self-IP addresses: 150.10.10.10 and 10.10.1.10 A virtual server at 150.10.30.30:80 that is associated with both the SNAT pool and the load-balancing pool. If a client at IP address 200.10.10.10 initiates a connection to the virtual server, what will the source IP address be in the packets sent to the chosen pool member?
- A. 150.10.33.33
- B. 10.10.1.33
- C. 150.10.30.30
- D. It could be any of the addresses of the members of the load-balancing pool.
- E. 200.10.10.10
- F. 10.10.1.10
正解: B
質問 18
Which tool is used on BIG-IP systems to capture data packets?
- A. qkview
- B. ethereal
- C. snoop
- D. tcpdump
正解: D
質問 19
After editing and saving changes to the configuration file containing virtual servers,
what is the immediate result?
- A. The new configuration is verified
- B. The new configuration is verified and loaded.
- C. The new configuration is verified and loaded if is it syntactically correct.
- D. The new configuration is loaded but not verified.
- E. The new configuration is neither verified nor loaded.
- F. The new configuration is verified not loaded.
正解: E
質問 20
When a virtual server has an HTTP profile with compression enabled, which traffic is compressed by the BIG-IP?
- A. all client-side traffic for that virtual server
- B. selected traffic from the pool member to the BIG-IP
- C. selected traffic from the BIG-IP to the client
- D. all sever-sid traffic for that cirtual srver
正解: C
質問 21
A site wishes to use an external monitor. Other than what is coded in the monitor script, what information must be configured on the BIG-IP for the monitor to be functional? (Choose two.)
- A. BIG-IP must know the name of the program.
- B. BIG-IP node or member the result are to be applied to. Must know all
- C. BIG-IP must know which function the program is going to test. Must know
- D. BIG-IP services that are running on the system to be tested.
- E. BIG-IP the IP addresses of the devices that will be tested. Must know which
正解: A,B
質問 22
Which is the result when multiple monitors are assigned to a pool member?
- A. The member is marked as available if any of the monitors succeed.
- B. The member is marked as unavailable if any of the monitors fails.
- C. The member is marked available if sufficient monitors succeed, and as unavailable if insufficient monitors succeed.
- D. The member is marked available if all monitors succeed, and as marginal if one or more monitors fail(s).
正解: C
質問 23
An LTM has the 3 virtual servers, four self IP addresses defined and the networks shown in the exhibit. Selected options for each object are shown below. Settings not shown are at their defaults. VirtualServerl Destination: 10.10.2.102:443 netmask 255.255.255.255 Pool: Pool with 3 members in the 172.16/16 network VirtualServer2 Destination: 10.10.2.102:* netmask 255.255.255.255 Pool: Pool with 3 members in the 192.168/16 network VirtualServer3 Destination: 10.10.2.0:80 netmask 255.255.255.0 Type: IP Forwarding SNAT1 Source IP: All Addresses SNAT Address: SNAT Pool with 2 members - 172.16.20.50 and 192.168.10.50 Self IPs 192.168.1.1; 172.16.1.1; 10.10.2.1;
10.10.1.1 A connection attempt is made with a source IP and port of 10.20.100.50:2222 and a destination IP and port of 10.10.2.102:80. When the request is processed, what will be the destination IP address?
- A. Destination IP: 10.10.2.102
- B. Destination IP: pool member in the 192.168/16 network
- C. The request will be dropped.
- D. Destination IP: pool member in the 172.16/16 network
正解: B
質問 24
What does the nsert XForwarded For?
option in an HTTP profile do?
What does the ?nsert XForwarded For?option in an HTTP profile do?
- A. A BIG-IP self-IP is inserted in the source address field on the server-sid connection.
- B. A BIG-IP self-IP is inserted in the source address field on the clint-side connection.
- C. The client IP addresses are inserted into messages sent to remote syslog servers.
- D. The client IP addresses are inserted into HTTP header.
正解: D
質問 25
How is traffic flow through transparent virtual servers different from typical virtual servers?
- A. Traffic flow through transparent virtual severs is not load balabced.
- B. Traffic flow through transparent virtual servers is bridged ( leave IP and MAC.addresses intact) rather than routed (leave IP address intact but change the MAC.addresses).
- C. traffic flow through transparent virtual servers must be forwarded through a single routing device.
- D. traffic flow through transparent virtual servers soes not have IP address translation performed.
正解: D
質問 26
QUESTION NO: 34. Click the Exhibit Button an LTM has the 3 virtual servers, a SNAT defined, four self IP addresses defined and the networks shown in the exhibit. Selected options for each object are shown below. Settings not shown are at their defaults. VirtualServer 1 Destination: 10.10.1.102:80 netmask 255.255.255.255 Pool: Pool with 3 members in the 172.16/16 network SNAT Automap enabled VirtualServer2 Destination: 10.10.1.102:* netmask 255.255.255.255 Pool: Pool with 3 members in the 192.168/16 network VirtualServer 3 Destination: 10.10.2.0:80 netmask 255.255.255.0 Type: IP Forwarding SNATI Source IP: All Addresses SNAT Address: SNAT Pool with 2 members -
172.16.20.50 and
192.168.10.50 Self IPs 192.168.1.1; 172.16.1.1; 10.10.2.1; 10.10.1.1 A connection attempt is made with a source IP and port of 10.20.100.50:80 and a destination IP and port of 10.10.2.10:80. When the request is processed, what will be the source and destination IP addresses?
- A. Source IP: 10.20.100.50; Destination IP: 10.10.2.10
- B. The request will be dropped.
- C. Source IP: Either 172.16.20.50 or 192.168.10.50; Destination IP: 10.10.2010
- D. Source IP: 10.10.2.1; Destination IP: 10.10.2.10
正解: C
質問 27
Which action CANNOT be performed by an iRule?
- A. Substitute a server's response with alternate data.
- B. Chang the virtual server's default pool.
- C. Direct a connection request to a specific pool.
- D. Discard a client before connecting to a server.
- E. Limit a given client to a set amount of bandwidth.
- F. Direct a client's request to a pool based on the client's browser's language.
正解: B
質問 28
Which is a potential result when a trunk is configured on a BIG-IP?
- A. Since any VLANs associated with the trunk are necessarily associated with multiple interfaces, the VLAN using the must use tagged packets.
- B. Packets flowing to the VLAN could arrive on any of the interfaces in the trunk
- C. No additional trunks can be configuration since each BIG-IP is limited to one trunk
- D. VLAN fail-safe is not available for any VLAN associated with any trunks.
正解: B
質問 29
What occurs when a save?command is issued?What occurs when a ? save?command is issued?
- A. The current configuration files are backed up.
- B. The current configuration files are verified for syntax, then the running configuration is installed in memory.
- C. The current configuration files are saved into an archive format.
- D. The current configuration files are loaded into memory.
正解: A
質問 30
The partial configuration below includes an iRule, a virtual server, and pools. When traffic from the client at 160.10.10.10:2056 connects to the virtual server Test_VS and sends an HTTP request, what will the client's source address be translated to as the traffic is sent to the chosen pool member? pool Test_Pool { member
10.10.10.10:80 member 10.10.10.11:80 } snatpool lower_range { member
10.10.10.1 } snatpool upper_range { member 10.10.10.2 } rule Test_iRule { when CLIENT_ACCEPTED. { if { [TCP::local_port]
< 2024 }{ snatpool lower_range } else { snatpool upper_range } virtual Test_VS { destination 200.10.10.1 :http pool Test_Pool rule Test_i Rule }
- A. 10.10.10.1
- B. It could be either 10.10.10.10 or 10.10.10.11.E.It could be either 10.10.10.10 or 10.10.10.11.
- C. 160.10.10.IOC.160.10.10.10
- D. 10.10.10.2
- E. 200.10.10.1200.10.10.1
正解: A
質問 31
Which two processes are involved when BIG-IP systems issue traps? (Choose two.)
- A. alertd
- B. bigd
- C. syslog-ng
- D. smtpd
正解: A,C
質問 32
......
最新301合格保証 試験問題集でには正確で最新な 問題：https://www.goshiken.com/F5/301-mondaishu.html