[2022年03月17日]1Z0-996-21テスト準備できるトレーニング練習テスト試験問題
試験問題解答ブレーン問題集で1Z0-996-21試験問題集PDFを使おう
Oracle 1Z0-996-21 認定試験の出題範囲：
| トピック | 出題範囲 |
|---|---|
| トピック 1 |
|
| トピック 2 |
|
| トピック 3 |
|
| トピック 4 |
|
| トピック 5 |
|
| トピック 6 |
|
| トピック 7 |
|
| トピック 8 |
|
質問 15
Your customer's initial measurement data (IMD) has been imported and can be viewed through the Measuring Component portal, but is not in the "Final" measurement status.
What can you assume that the IMD has passed?
- A. Critical Validation, High/Low Check Validation, and Sum Check Validation
- B. Sum Check Validation
- C. Multiplier Check Validation
- D. Critical Validation
- E. High/Low Check Validation
正解: C
質問 16
Which statement correctly describes the relation between a device and a measuring component?
- A. A device can have any combination of interval and/or scalar measuring components.
- B. A device configuration links a device only to interval channels.
- C. A device should have only one measuring component type.
- D. Two measuring components on the same device should have the same Units of Measure (UOM).
正解: A
質問 17
Which relationship must be established with an external system or a service provider before creating bill determinants?
- A. Usage Factor
- B. Usage Rule
- C. Usage Transaction
- D. Usage Subscription
正解: D
質問 18
Which statement supports usage transaction calculation?
- A. Bill determinants are derived from the initial measurement data of the measuring components installed at the usage subscription's devices during the calculation period.
- B. Bill determinants are derived from the final measurements of the measuring components or devices installed at the usage subscription's service points during the calculation period.
- C. Bill determinants are derived from the final measurements for only interval measuring components or devices installed at the usage subscription's service points during the calculation period.
- D. Bill determinants are derived from the initial measurement data of the measuring components devices installed at the usage subscription's service points during calculation period.
正解: B
質問 19
Throughout its lifecycle, an asset's disposition changes as it is moved between locations and service statuses.
Which are valid asset dispositions?
- A. In Receipt; Installed; In Stores; Retired
- B. In Receipt; In Field; In Stores; Retired
- C. Receiving; In Field; Storage; Retired
- D. Receiving; Installed; Storage; Retired
正解: B
質問 20
Which three statements are true about usage subscriptions? (Choose three.)
- A. A usage subscription can be configured to include only a portion of a service point usage.
- B. Usage subscriptions are always related to an account.
- C. A usage subscription can have either parent or child service points.
- D. A usage subscription can have only one service point.
- E. A usage subscription can have many service points.
正解: B,C,E
質問 21
Which three are important Account concepts that must always be followed? (Choose three.)
- A. Accounts expire when there are no active contracts.
- B. An Account references one or more persons.
- C. Every Account has a unique, system-assigned Account ID.
- D. Bills are produced for an account and are sent to the account persons.
- E. An Account can only reference one and only one person at one time.
正解: C,D,E
質問 22
Which two plug-in spots can call the rating functionality using base package-supplied algorithm types? (Choose two.)
- A. Bill Segment Type - Bill Segment Create
- B. Bill Segment Type - Bill Segment FT Creation
- C. Billable Charge Template
- D. Adjustment Type - Generate
- E. Adjustment Type - Adjustment FT Creation
正解: B,E
質問 23
When configuring the Get Scalar Details usage rule, which three attributes can be defined to retrieve scalar values? (Choose three.)
- A. Service Quantity Identifier
- B. Unit of Measure
- C. Device ID
- D. Time of Use
- E. Service Point ID
正解: C,D,E
質問 24
Which four statements correctly describe what a Service Agreement Type controls? (Choose four.)
- A. It controls the Service Type to be billed.
- B. It controls the Late Payment Charge Calculation Method.
- C. It controls the valid Rates that can be applied to the service agreement type.
- D. It controls where the bill is to be sent.
- E. It controls debt age.
正解: A,B,C,E
質問 25
How many bill segment-related financial transactions do Payment Arrangements have?
- A. depends on the number of payments that are part of the payment arrangement
- B. one
- C. none
- D. unlimited
- E. depends on the number of bills that will contain the customer's payment arrangement details
正解: B
解説:
Reference:
20Bill%20Customers/4.2.2.12%20CCB.v2.4.Manage%20Payment%20Arrangement%20Charges.pdf (14)
質問 26
A Service Order Orchestrator determines the steps required to complete the service.
As an example, based on the state of the service point, what does the Enable Service Orchestrator determine the actions for?
- A. Connect the Service Point; Install a Device; Create a Usage Subscription
- B. Create a Service Point; Install a Device; Turn on the Device
- C. Connect the Service Point; Install a Device; Turn on the Device
- D. Create a Device Configuration; Install a Device; Turn on the Device
正解: B
質問 27
On which three entities can proration be disabled? (Choose three.)
- A. Calculation Rule
- B. Rate Schedule
- C. Rate Version Calculation Group
- D. Calculation Rule Business Object
- E. Bill Factor
正解: B,C,D
質問 28
There has been a meter exchange at a service point in the past year.
How many installation events exist for the service point for the past year?
- A. Two
- B. None
- C. One
- D. Four
- E. Three
正解: C
質問 29
When you cancel a payment, what will the system automatically do?
- A. cancel all tenders associated with the payment
- B. generate a new Financial Transaction to reverse the original Financial Transaction
- C. charge a NSF Fee for the payment cancellation
- D. impact the credit rating
正解: C
質問 30
What can cause multiple bill lines for a rate component to be produced in a bill calculation header?
- A. change in Rate Version Calculation Group
- B. changes in Rate Schedule and Bill Factor
- C. changes in Rate Version Calculation Group and Bill Factor
- D. change in Rate Schedule
- E. change in Bill Factor
正解: B
質問 31
Usage transactions can contain date breaks. Which is used to supply date breaks?
- A. the Usage Subscription Type
- B. the Deferred Monitor Calculation Algorithm
- C. the requesting system or user input
- D. the Usage Subscription BO
正解: A
質問 32
Which three initial measurement data (IMD) exception categories are available when you execute VEE rules?
(Choose three.)
- A. Complete
- B. Low
- C. Issue
- D. Information
- E. Terminate
正解: C,D,E
質問 33
Your client has installed scalar devices to measure the solar energy generated (Export) and the energy received (Import) from the National Grid. This data is stored in separate measuring components (registers).
The validation rules are generally the same for both measuring components, but there is one exception. The Negative Consumption check applies only to energy received (import).
Which two are possible configurations resulting in the Negative Consumption rule being checked for energy received (import) only? (Choose two.)
- A. Use Eligibility Criteria.
- B. Use the Skip Flag in the VEE rule.
- C. Remove the Negative Consumption check from the VEE group.
- D. Create two different VEE groups.
- E. Modify the base VEE rule.
正解: A,D
質問 34
What Service Order activity types does the application include?
- A. Enable Service; Disable Service; Cut for Non-Payment; Reconnect Service for Payment; Exchange Meter; Back-to-Back Service
- B. Start Service; Stop Service; Cut for Non-Payment; Reconnect Service for Payment; Exchange Meter; Move-In/Move-Out Service
- C. Enable Service; Disable Service; Install Meter; Remove Meter; Exchange Meter; Back-to-Back Service
- D. Start Service; Stop Service; Install Meter; Remove Meter; Exchange Meter; Move-In/Move-Out Service
正解: A
質問 35
How many bill segment-related financial transactions do pay plans have?
- A. depends on the number of bills that will contain the customer's pay plan commitments
- B. one
- C. depends on the number of payments that is part of the pay plan
- D. none
- E. unlimited
正解: A
質問 36
When a customer has a specific price for a defined quantity which is different to other customers, where is this specific price for the related Bill Factor defined?
- A. Calculation Rule
- B. Bill Factor Characteristic
- C. Service Agreement - Contract Value
- D. Account Characteristic
- E. Bill Factor Value
正解: C
質問 37
Which configuration steps are required to derive loss-adjusted kWh on a measuring component based on a loss factor value related to a service point?
- A. Configure a factor and derivation algorithm, and then associate both to the Measuring Component Type and service point.
- B. Configure an SQI and the derivation algorithm, and then associate the algorithm to the Measuring Component Type and SQI to the service point.
- C. Configure a Service Point Characteristic Type, factor, derivation algorithm, and Service Quantity Identifier (SQI), and then associate the SQI and derivation algorithm to the Measuring Component Type and the characteristic value to the service point.
- D. Configure a factor and derivation algorithm, and then associate the factor to the Measuring Component Type and the derivation algorithm to the service point.
- E. Configure a Service Point Characteristic Type and derivation algorithm, and then associate the algorithm to the Measuring Component Type and the characteristic value to the service point.
正解: B
質問 38
Critical validation rules verify the integrity of the initial measurement data (IMD). If an implementation needs toadd new critical validations, where would you configure them?
- A. in the pre-processing algorithm of the IMD Seeder BO (Dl-IMDSeeder)
- B. as options on the IMD Seeder BO (D1-IMDSeeder)
- C. in the schema of the IMD Seeder BO (D1-IMDSeeder)
- D. in the validation algorithm on the IMD Seeder BO (D1-IMDSeeder)
- E. as new lifecycle algorithms on the IMD Seeder BO (D1-IMDSeeder)
正解: A
質問 39
Which three statements are true in relation to Financial Transaction creation algorithms? (Choose three.)
- A. They control if and how the General Ledger entries are created.
- B. They control how the payoff balance is affected.
- C. They control when a Financial Transaction is to be swept onto a bill.
- D. They control how the current balance is affected.
- E. They control how the General Ledger details are created as these must always exist against a Financial Transaction.
正解: A,B,C
質問 40
......
無料ダウンロードOracle 1Z0-996-21リアルな試験問題で合格しよう：https://www.goshiken.com/Oracle/1Z0-996-21-mondaishu.html