[2022年03月21日] 無料CheckPoint 156-816.61試験問題と解答
検証済み156-816.61問題集と解答は最新156-816.61をダウンロード
質問 32
The ______________ interface is configured in a VLAN environment, to allow multiple Virtual Systems to share a single physical interface on a VSX Gateway.
- A. Physical
- B. Synchronization
- C. Symbolic
- D. Virtual
- E. Warp
正解: D
質問 33
When configuration a new Virtual System for your VSX Gateway configuration, what should you do first?
- A. Open the Admin CMA SmartDashboard and create a new Virtual System Object
- B. Add a new Virtual System to the Main Customer, so that the Admin CMA can be used as the Management Server
- C. Create a new customer and CMA, to be used as the Virtual System's Management Server
- D. Open the Admin CMA SmartDashboard and create a new CMA object to be used as the Virtual System's Management Server
- E. Open the Global SmartDashboard and create a new Virtual System Object
正解: C
質問 34
Which of the following MDS types allows you to create and manage a VSX Gateway?
- A. MDS SmartCenter for VSX
- B. MDS Manager station
- C. MDS VSX Integrator
- D. MDS Container station
- E. MDS MLM
正解: D
質問 35
Consider the following scenario: Your Network configuration requires that you configure a single interfaces on the VSX Gateway to lead to multiple networks. A different Virtual System must protect each network sending traffic through the VSX Gateway. You configured a dedicated management interface on the VSX Gateway, along with 1 External Virtual Router and 4 Virtual Systems one for each Customer. Which of the following hardware devices must be used to connect the different networks to the single shared interface?
- A. Frame cache-redirection enabled switch
- B. Router
- C. Jumbo Frame-enabled switch
- D. VLAN-capable switch
- E. Content-intelligent switch
正解: D
質問 36
In a VLAN Tag added to a frame header, the __________ is a 2 byte number that identifies a frame as tagged.
- A. User_priority
- B. VLAN identifier
- C. Tag Control information
- D. Tag Protocol Identifier
- E. Canonical Format Indicator
正解: D
質問 37
During the initial configuration of a VSX Gateway cluster, the VSX Administrator is prompted to specify each cluster member's name, as shown below: Which of the following best describes this name?
- A. IP Address of the individual VSX Gateway in the Cluster
- B. Any name the VSX Administrator chooses to describe the cluster member
- C. Customer for which this VSX Gateway in the cluster
- D. Hostname of the individual VSX Gateway in the cluster
正解: B
質問 38
Which of the following interface are configured by running sysconfig, during installation of a VSX Gateway in a High Availability environment?
- A. Dedicated Customer interface
- B. Management Interface
- C. Any Configured VLAN
- D. Synchronization interface
- E. External Interface
正解: B
質問 39
The provisioning and network configuration channel does NOT:
- A. Install Administrator defined Security Policies
- B. Create Virtual Systems and Virtual Routers on a Gateway
- C. Configure interface and routing information on the Gateway
- D. Create a SCI Certificate for new objects and transfer the Certificate to an object on the VSX Gateway
- E. Install a default Security Policy blocking all traffic
正解: A
質問 40
What is the required to prevent loops in Virtual Systems in a Cluster XL environment?
- A. STP
- B. VRRP
- C. MPLS
- D. OSPF
- E. BPDU
正解: A
質問 41
You are configuring source-based routing in a VSX Gateway deployment with both External and Internal Virtual Routers. Which of the following functions can't be configured for the Virtual Systems?
- A. Network Address Translation
- B. Anti-spoofing measures
- C. Intranet VPNs
- D. Virtual System clustering
- E. Remote Access VPNs
正解: B
質問 42
Communication within a VLAN takes place at which layer of the OSI Model IP stack?
- A. Session Layer
- B. Transport Layer
- C. Physical Layer
- D. Data-link Layer
- E. Network Layer
正解: D
質問 43
The ____________ interface is configured in a VLAN environment, to allow multiple Virtual systems to share a single physical interface on a VSX Gateway.
- A. Physical
- B. Synchronization
- C. Symbolic
- D. Virtual
- E. Warp
正解: D
質問 44
Which of the following objects allows you to configure resource settings, to limit the number of concurrent connections?
- A. VSX Gateway
- B. Internal Virtual Router
- C. Virtual Systems
- D. External Virtual Router
- E. Virtual Switch
正解: C
質問 45
Which of the following VSX components maintain Layer 3 Connectivity?
- A. Internal Virtual Switch
- B. VLAN Interface
- C. External Virtual Switch
- D. Virtual Router
- E. Virtual System in Bridge Moe
正解: D
質問 46
Which of the following commands should you run to stop a VSX Gateway Cluster?
- A. cphastop
- B. vsxhastop
- C. vsxstop
- D. cpstop
- E. vsx cpstop
正解: D
質問 47
Which of the following statements is true concerning the default Security Policy of the External Virtual Router?
- A. The External Virtual Router always enforces the same policy as the Management Virtual System
- B. The default policy of the External Virtual Router Denies all traffic going to or coming from it
- C. The External Virtual Router automatically performs Hide NAT behind external interface for all Virtual Systems connected to it
- D. All traffic coming from networks protected by a VSX Gateway is accepted. All other traffic is dropped
- E. The default policy of the External Virtual Router can't be changed
正解: B
質問 48
When configuring a new Virtual System for your VSX Gateway configuration, what should you do first?
- A. Open the Admin CMA SmartDashboard and create a new Virtual System object
- B. Create a new Customer and CMA, to be used as the Virtual System's Management Server
- C. Open the Admin CMA SmartDashboard and create a new CMA object to be used as the Virtual System's Management Server
- D. Add a new Virtual System to the Main Customer, so that the Admin CMA can be used as the Management Sever
- E. Open the Global SmartDashboard and create a new Virtual System object
正解: B
質問 49
When deploying a VSX Gateway managed by a Provider-1 MDS, how many Administrators can connect in Read/Write mode to the MDS database simultaneously?
- A. Two: One can connect to the Management Virtual System database, while the other connects to the Virtual System database
- B. No more than 250
- C. One
- D. No more than 25
- E. One for each CMA
正解: E
質問 50
When configuring VSX Gateway Clustering the VSX Administrator assigns a unique
_____________ to each VSX Gateway in the cluster.
- A. Subnet Mask
- B. Synchronization interval
- C. Initial State (Active/Standby)
- D. Management server
- E. Name
正解: E
質問 51
......
リアル問題集を使おう 100%無料156-816.61試験問題集：https://www.goshiken.com/CheckPoint/156-816.61-mondaishu.html