2023年最新の更新のNutanix Certified Professionalが有効なNCP-MCI-6.5問題集を無料提供しています
最新のGoShiken NCP-MCI-6.5PDF問題集をダウンロードしちゃおう：https://www.goshiken.com/Nutanix/NCP-MCI-6.5-mondaishu.html（173問題と解答)
質問 # 76
An administrator is working with Nutanix Support and needs to provide logs for troubleshooting an issue. The cluster is located in a secure environment. Data such as IP addresses and VM names cannot be shared.
Which method should be used to anonymize the log data sent to Nutanix Support?
A)
B)
C)
D)
- A. Option B
- B. Option A
- C. Option D
- D. Option C
正解：C
質問 # 77
When a VM is connected to a Nutanix managed network, when is the IP addressed assigned?
- A. When the VM is powered on.
- B. When the guest OS sends a DHCP request.
- C. When the vNIC is created on the VM.
- D. When the guest OS receives a DHCP acknowledge.
正解：A
解説：
When a VM is connected to a Nutanix managed network, the IP address is assigned when the VM is powered on. A Nutanix managed network is a network that is created and managed by Prism Central using IP address management (IPAM). IPAM allows Prism Central to automatically assign IP addresses to VMs from a pool of available addresses in a subnet. IPAM also tracks the IP address usage and availability across clusters and networks4.
When a VM is connected to a Nutanix managed network, the administrator can choose one of the following assignment types for the IP address:
Assign Static IP: This option allows the administrator to manually specify a static IP address for the VM from the subnet range. The IP address will not change unless the administrator changes it.
Assign with DHCP: This option allows Prism Central to dynamically assign an IP address for the VM from the subnet range using DHCP. The IP address may change depending on the DHCP lease time and availability.
No Private IP: This option allows the administrator to skip assigning an IP address for the VM. This option is useful for scenarios where the administrator wants to use an external IPAM solution or assign an IP address later5.
Regardless of the assignment type, the IP address is assigned when the VM is powered on. This is because Prism Central needs to communicate with the hypervisor (AHV or ESXi) to configure the virtual NIC (vNIC) of the VM with the IP address information. This communication can only happen when the VM is in a powered on state6.
質問 # 78
Refer to Exhibit.
An administrator increases the cluster RF to 3. The containers are not modified.
What will the new values in the data resiliency dashboard be for FAILURES TOLERABLE for the Zookeeper and Extent Groups components?
- A. Zookeeper = 2 and Extent Groups = 1
- B. Zookeeper = 1 and Extent Groups = 2
- C. Zookeeper = 2 and Extent Groups = 2
- D. Zookeeper = 1 and Extent Groups = 1
正解：A
質問 # 79
How many Prism Central instances are required to deploy Leap:'
- A. One per AHV cluster
- B. One per physical site
- C. One per availability zone
- D. One per customer environment
正解：C
質問 # 80
What is the expected operation during node addition when the new node has a different AOS version?
- A. The node is automatically re-imaged using the software currently running in the cluster.
- B. The entire cluster is upgraded to the latest one-click release.
- C. The addition fails and forces the administrator to image using standalone Foundation.
- D. The node is added and a separate upgrade operation must be performed.
正解：A
解説：
The node is automatically re-imaged using the software currently running in the cluster. This is because Nutanix supports a feature called Auto Re-Image that allows adding nodes with different AOS versions to an existing cluster without manual intervention. The Auto Re-Image feature detects the AOS version mismatch and automatically downloads and installs the same AOS version as the cluster on the new node. This ensures that the cluster remains in a consistent state and avoids any compatibility issues.
質問 # 81
How should an administrator enable secure access to Volumes using a password?
- A. CHAP
- B. SAML
- C. iSER
- D. LDAP
正解：A
解説：
https://portal.nutanix.com/page/documents/details/?targetId=Web-Console-Guide-Prism-v50:wc-block-services-enabling-t.html Provision storage on the Nutanix cluster by creating a volume group. Create a client whitelist to enable access to the volume group by using the IP addresses or client initiator IQNs in a whitelist (as part of the volume group configuration). Create a secret for the volume group if you are using CHAP authentication.
質問 # 82
An administrator wants to replace and old node with a node of newer generation in a 3-node cluster. The administrator has already chosen the appropriate node. But unable to remove it from the cluster.
Why is the Remove Host option not shown in the exhibit?
- A. It is not possible to remove a host from a 3-node cluster.
- B. It is not possible to remove a node from a the cluster using Prism Central
- C. It is only possible to remove a host from a cluster using CLI.
- D. The host needs to be placed into maintenance Mode before.
正解：A
質問 # 83
Which method can be used to migrate a VM configured for UEFI-boot from a Nutanix Hyper-V cluster to AHV?
- A. Nutanix Move
- B. Cloud Connect
- C. Live Migration
- D. Storage vMotion
正解：A
解説：
Nutanix Move is a tool that allows you to migrate VMs from different sources to Nutanix AHV with minimal downtime and complexity. Nutanix Move supports migration from Hyper-V to AHV, including VMs configured for UEFI-boot. UEFI stands for Unified Extensible Firmware Interface, which is a standard for the software interface between the operating system and the firmware. UEFI-boot is a mode of booting that uses UEFI instead of BIOS (Basic Input/Output System) to load the operating system. UEFI-boot offers some advantages over BIOS-boot, such as faster boot time, larger disk support, and better security features1.
To migrate a VM configured for UEFI-boot from a Nutanix Hyper-V cluster to AHV, you need to use Nutanix Move and follow these steps2:
Download and deploy the Nutanix Move appliance on the AHV cluster.
Log in to the Nutanix Move web console and add the source Hyper-V environment and the target AHV environment.
Create a migration plan and select the VMs that you want to migrate. You can choose either automatic or manual preparation mode for the migration.
Start the migration plan and monitor the progress. The migration plan will perform data seeding, which is the process of copying the VM data from the source to the target in the background.
When the data seeding is complete, perform a cutover, which is the process of shutting down the source VMs and powering on the target VMs. The cutover will also configure the boot device for the UEFI-boot VMs on AHV.
Verify that the migrated VMs are working as expected on AHV.
質問 # 84
What is he recommended approach for a constrained VM?
- A. Reboot the VM
- B. Decrease the VM resources
- C. Increase the VM resources.
- D. Delete the VM.
正解：C
解説：
A constrained VM is one that does not have enough resources for the demand and can lead to performance bottlenecks. A VM is considered constrained when it exhibits one or more of the following baseline values, based on the past 21 days: CPU usage > 90% (moderate), 95% (severe) CPU ready time > 5%, 10% Memory usage > 90%, 95% Memory swap rate > 0 Kbps1. To provide adequate host resources, resize (increase) the constrained VMs1.
質問 # 85
An administrator would like to leverage the Reliable Event Logging Protocol (RELP) with their Remote Syslog Server. After completing the configuration, it is observed that RELP logging is not working as expected.
What is the likely cause of this issue?
- A. The GENESIS was the only one chosen to forward log information.
- B. The cluster does not have RELP installed.
- C. The remote server does not have rsyslog-relp installed.
- D. The Remote Syslog Server was configure using TCP as the protocol.
正解：C
質問 # 86
The customer is seeing high memory utilization on a mission critical VM. Users report that the application is unavailable. The guest OS does not support hot add components.
How should the administrator fix this issue?
- A. During the next maintenance window:
*Select the VM from the VMs list
*Perform a graceful shutdown - B. From the Prism web console:
*Go to the VM dashboard
*Select the VM from the VMs list
*Choose Update
*Adjust the amount of memory assigned to the VM - C. Access the CVM on the host that is running the VM:
*Open acli
*Run a command to increase the amount of RAM assigned to the VM - D. Go to Control Panel in the VM:
*Select the Computer Properties
*Increase the amount of RAM assigned
正解：A
質問 # 87
A configuration is single domain, single forest, and does not use SSL.
Which port number should be used to configure LDAP?
- A. 0
- B. 1
- C. 2
- D. 3
正解：B
解説：
Port 389 is the default port for LDAP without SSL encryption. Port 636 is used for LDAP over SSL (LDAPS). Port 3268 and 3269 are used for Global Catalog (GC) and Global Catalog over SSL (GCSSL), respectively2.
質問 # 88
Which method can be used to migrate a VM configured for UEFI-boot from a Nutanix Hyper-V cluster to AHV?
- A. Nutanix Move
- B. Cloud Connect
- C. Live Migration
- D. Storage vMotion
正解：A
質問 # 89
An administrator needs to create a new Linux image and will to do the following as part of the VM deployment:
* Set the OS hostname
* Add custom users
* Add keys
* Run custom scripts
What package needs to be installed in the Linux image to facilitate this automation?
- A. Sysprep
- B. CloudInit
正解：B
解説：
CloudInit is a package that contains utilities for early initialization of cloud instances. It allows you to customize virtual machines provided by a cloud vendor by modifying the generic OS configuration on boot. You can use CloudInit to set the OS hostname, add custom users, add keys, run custom scripts, and more2. CloudInit is supported by most major Linux and FreeBSD operating systems and works across different cloud platforms3. Sysprep is a tool for Windows operating systems that prepares an installation for cloning, auditing, and customer delivery4.
質問 # 90
Which two types of granular RBAC does Nutanix provide for AHV hosts? (Choose two.)
- A. Disk based
- B. Category based
- C. Project based
- D. Cluster based
正解：B、D
解説：
Nutanix provides two types of granular RBAC for AHV hosts: category based and cluster based3. Category based RBAC allows administrators to assign roles to users or groups based on categories, which are key-value pairs that can be applied to various entities in Prism Central, such as clusters, hosts, VMs, images, and networks. Categories can be used to group entities by different criteria, such as department, project, environment, or location. For example, an administrator can create a category key named Department and assign different values to it, such as Finance, Marketing, or Engineering. Then, the administrator can apply this category to different clusters or hosts and assign roles to users or groups based on this category. This way, users or groups can have different levels of access to different clusters or hosts depending on their department4.
Cluster based RBAC allows administrators to assign roles to users or groups based on specific clusters registered in Prism Central. For example, an administrator can create a role named Cluster Admin and assign it to a user or group for a particular cluster. This way, the user or group can have full access to that cluster and its hosts and VMs, but not to other clusters5.
質問 # 91
......
NCP-MCI-6.5試験に備えるために、Nutanixはオンラインコース、インストラクター主導のトレーニング、および認定試験を含むトレーニングおよび認定資格のさまざまなリソースを提供しています。Nutanixはまた、プロフェッショナルが互いに接続し、経験や知識を共有できるコミュニティフォーラムを提供しています。
実験された試験材料はNCP-MCI-6.5：https://www.goshiken.com/Nutanix/NCP-MCI-6.5-mondaishu.html
最新NCP-MCI-6.5リアル試験問題をフォローせよ！：https://drive.google.com/open?id=1y8Zgy-DNOZGv2fefBCOI7J9p0ND8m2Pz