[2023年04月16日] 完全版最新の問題集でPDFで最新HPE6-A69試験問題と解答
無料で使えるHPE6-A69試験問題集で100%合格できる試験簡単に合格させるGoShiken
質問 # 12
Which statements are true with regards to Strict Priority scheduling? (Select two.)
- A. Under strict Priority, the port will never forward a packet in a tower priority queue if a higher priority queue includes even one packet.
- B. Strict Priority works best when the network uses the higher priority queues for the majority of applications
- C. Strict Priority scheduling protects against starvation of low priority queues.
- D. Strict Priority must be used with egress queue shaping to prevent starvation.
正解：A、D
質問 # 13
Refer to the exhibit.
You want to protect the aggregation layer if the VSXISL falls. Where should you place a VSX keepalive link?
- A. On VSX LAG 1
- B. On VSX LAG 101
- C. On a dedicated link created using port 1'1/48 of each aggregation switch
- D. On the OOBM ports of both aggregation switches
正解：D
質問 # 14
Which statement is true regarding remote mirroring?
- A. The same source/destination address can be used in multiple sessions.
- B. The ArubaOS-CX switch supports a maximum of two mirroring sessions
- C. When mirroring destination is tunnel, a DSCP value can be set on the tunnel
- D. Per session multiple destination addresses can be configured
正解：D
質問 # 15
What are the requirements for managing a switch using Aruba NetEdit? (Select two)
- A. Telnet must be disabled on the switch
- B. HTTPS service must be restricted to the management VRF
- C. REST access-mode must be set to read-write.
- D. The switch user account mat NetEdit uses should have a password.
正解：A、C
質問 # 16
An administrator warns to start a REST API session with an Aruba-OS CX switch Which HTTP method should the Administrator use to start a session?
- A. PUT
- B. POST
- C. GET
- D. LOGIN
正解：B
質問 # 17
Refer to the following configuration:
How do you configure QoS policies for user traffic in conjunction with user roles in all wired access switches?
(Select two)
- A. QoS policies should be configured by the Mobility Controller when you need to set to all wired access switches
- B. Use NetEdit to replicate the configuration of QoS policies to all wired switches
- C. With ClearPass and downloadable user roles, you can add QoS policies for user roles
- D. in a RADIUS server with Aruba Vendor Specific Attribute (VSA) dictionary, you can add QoS policies for user roles.
正解：D
質問 # 18
A customer is installing a new ArubaOS-CX switch The customer does not change the factory default QoS configuration The switch receives an 802.1Q tagged VOIP frame on a port The header contains a DSCP value of EF(46) and the frame has an 802 ip value of 5 How will the switch forward the frame?
- A. The switch trusts the settings and It forwards the frame with the current settings
- B. Forwards the frame with best effort forwarding
- C. Forwards it based on the DSCP value in the frame
- D. Forwards it based on the 802 ip value in the frame
正解：C
質問 # 19
You have designed a new wired solution for a customer that uses gateways and Dynamic Segmentation Which statements about User-Based Tunneling are true? (Select two)
- A. UBT is supported only with Aruba Gateway standalone
- B. in UBT, the switch sends user role Information to Aruba Gateway
- C. In UBT, the Aruba Gateway assigns the Primary user role
- D. In U8T, the switch performs user authentication.
- E. in UBT, the Aruba Gateway performs user authentication
正解：A、E
質問 # 20
The customer is currently planning the migration of their current switches from the existing Aruba 5400R to ArubaOS-CX 6400. Which statements are correct about the mitigation of rogue DHCP servers with the selected product? (Select two )
- A. With Aruba CX 6400 configure dhcp-snooping for the selected VLANs with authorized servers
- B. DHCP snooping can be enabled on ArubaOS-CX switches, once it's disabled on ArubaOS switches for same VLANs
- C. DHCP snooping is supported on both IPv4 and IPv6
- D. DHCP snooping needs to be enabled per VRF basis on Aruba CX 6400
正解：A、B
質問 # 21
An administrator is utilizing the orchestration capabilities of NetEdit. What are the two plan types that can be created Configuration management plan
- A. Firmware plan
- B. Deployment plan
- C. Firmware plan
- D. Configuration plan
正解：A、C
質問 # 22
When planning a new wired network solution for an organization, mere are technical goals that must be achieved to support the organization objectives and their applications and services.
Which options are valid technical goals? (Select two.)
- A. Reduce the cost of wiring.
- B. improve the network throughput
- C. Accelerate the ordering process of new network hardware.
- D. Transform the process of acquisition of a new network solution from a CAPEX to an OPEX model
- E. Replace hardware that is reaching end of support with a technology refresh.
正解：C、D
質問 # 23
A customer wants to implement a new Aruba 6300M 48-port iGbE Class 4 PoE and d-port SFP56 Switch solution. The customer wants to automatically provision devices, connected to the switch with correct settings.
VoIP phones need to be placed in VLAN 10, send out traffic with a VLAN tag. The phone is LLDP-MED capable How can you accomplish this with the least amount of administrative effort?
A)
B)
C)
D)
- A. Option B
- B. Option C
- C. Option A
- D. Option D
正解：C
質問 # 24
Which statement is true regarding IP-SLA?
- A. ArubaOS-CX supports Doth SLA configuration through CU and by agents through the NAE.
- B. ArubaOS-CX supports on-demand as well as forever tests.
- C. The default and minimum probe interval for voip SLA is 180 seconds
- D. ArubaOS-CX supports forever tests
正解：D
質問 # 25
Company A and Company B are merging their BGP routed networks The companies have overlapping IP ranges and security concerns during the migration phase. Which Aruba CX 8325 functionality would help the merging of networks in a secure way?
- A. Use of ACL's to separate the company networks at the VLAN level
- B. Use of virtual route forwarding and BGP route leaking
- C. Use of vsf capable switch to integrate the routing
- D. Use of Aruba Gateway appliance to control the routes between merged networks
正解：D
質問 # 26
A customer would like to utilize some ArubaOS-CX 6300F switches to perform OSPF routing.
With the ports set up as routed ports, and default parameters for OSPF, which action is the simplest way to allow the fastest communication...
- A. No action is required
- B. Utilize Equal-cost multi-path routing to aggregate more bandwidth on the WAN.
- C. Set the OSPF reference bandwidth to 10 or higher
- D. Set the OSPF cost parameters on every interface on every switch according to the Bandwidth or each link
正解：A
質問 # 27
A customer wants to verify the proposed configuration snippets to create a point-to-point link between Aruba Switch and a third-party switch.
Will this configuration work with static routing?
- A. No, the configuration will not work, because the Aruba Switch has an MTU mismatch which will prevent IP communication.
- B. No. the configuration will not work, because the Aruba Switch does not have a locally reachable IP address from the third-party switch.
- C. yes, the configuration should work fine and has no issues
- D. No. the configuration will not work because the Aruba Switch does not have the "routing" command on it
正解：D
質問 # 28
Match the BGP path selection criteria attributes (Each option may be used once, more than once, or not at all)
正解：
解説：
質問 # 29
A customer is having a performance issue on the network and has received complaints about users experiencing Intermittent connectivity. After performing a packet capture, It is determined that there is unwanted UDP port 68 traffic being broadcast
6300W%wit
To mitigate this issue, which ArubaOS-CX 6300M switch feature would be best to implement?
- A. private-vlan
- B. dhcpv4-snooping
- C. broadcast-limit
- D. bcms-optimization
正解：B
質問 # 30
The customer is considering Implemented the following VSX configuration that will host an Aruba mobility cluster servicing 9000 dual stack employee devices.
The client's default gateways will be hosted on the VSX stack. The customer is seeking advice about how to ensure ArubaOS-CX VSX best practices have been applied.
What advice can you offer the customer? (Select two)
- A. The vsx linkup-delay timer is unnecessarily high; it should be reduced to prevent excessive delay of packet forwarding when a VSX peer joins an existing master.
- B. The ISL Bandwidth should be upgraded
- C. The Keepalive interface should be changed to interface LAG2 so there is redundancy through the mobility cluster.
- D. Agg-1 and Agg-2's hardware forwarding table profile should be changed to "L3-agg''.
- E. The -system-mac' of Agg-1 should be changed to an unused address from the unicast private address range
- F. The keepalive subnet is misconfigured, it has an inappropriate address on Agg-1.
正解：D、F
質問 # 31
A customer would like to utilize some ArubaOS-CX 6300M switches to perform OSPF routing.
All ports are routed, and ECMP is enabled, with other default parameters for OSPF. What will be the result of traffic sent from CLIENT-A to CUENT-B?
- A. Traffic will be SW3 -> SW-1 -> sw-4 -> SW-2
- B. Traffic will be SW3 -> SW-4 -> SW-2.
- C. Traffic will be SW3 -> SW-1 -> Sw-2 & SW3 -> SW-4 -> SW-2
- D. Traffic win be SW3 -> SW-1 -> sw-2.
正解：A
質問 # 32
Which functionalities of ClearPass can be added in a wired network that implements dynamic segmentation?
(Select two.)
- A. Profiling
- B. Dynamic VLANs
- C. Downloadable user Roles
- D. Fingerprinting
- E. Multi Factor Authentication
正解：B、E
質問 # 33
......
無料で試せるHPE6-A69試験問題HPE6-A69実際の無料試験問題：https://www.goshiken.com/HP/HPE6-A69-mondaishu.html