2025年最新の実際のSMI300XE問題集最新Supermicro練習テスト問題集ゲット
SMI300XE問題集PDFでSMI300XEリアル試験問題解答
質問 # 11
When working on the GPU tray, where should you place it to ensure a safe work environment?
- A. A flat surface
- B. On top of the chassis
- C. On a cardboard box that may or may not support the weight of the tray
- D. On the floor where everyone is walking by
正解：A
解説：
m
質問 # 12
How would you identify and differentiate a failed GPU that needs to be replaced from other GPUs in the system that are functional?
- A. By the discoloration
- B. By the warning light
- C. By the serial number
- D. By the part number
正解：B
解説：
A failed GPU in the Supermicro MI300X system can be identified usingthe warning light indicator.
Supermicro systems includeLED diagnostic indicatorsthat display the operational status of various components, including GPUs. When a GPU malfunctions, the system will trigger an alert that is displayed as a warning light on the GPU tray or the server chassis. This allows technicians to visually identify the faulty GPU without requiring extensive hardware testing.
* Discoloration (A)is not a reliable method of identifying a failed GPU as it would require physical degradation, which is uncommon.
* Serial numbers (B)andPart numbers (C)are used for inventory tracking but do not indicate functional status.
* Warning lights (D)are the recommended method, as documented in the system health monitoring section of Supermicro's documentation, which detailsLED indicators and diagnostic lights for system status monitoring.
質問 # 13
When you first access the IPMI Web GUI, you will be prompted to log in. Where can you find the password?
- A. It will be on the tag next to the I/O Module.
- B. Use the system model number as the password.
- C. It will be on the label on the bottom of the system.
- D. It will be on the label on the bottom side of the system cover.
正解：D
解説：
Supermicro ships systems with aunique BMC passwordfor security purposes. Thispassword is printed on a label located on the bottom side of the system cover.
* Option A (on the I/O module tag)is incorrect as the tag typically containsnetwork interface informationrather than credentials.
* Option B (using the system model number as a password)is incorrect because Supermicrodoes not use default passwords based on the model number.
* Option C (on the bottom of the system)is close but not precise;the correct location is the bottom side of the system cover.
* Option D (label on the bottom side of the system cover)is correct, as stated in theSupermicro IPMI and BMC login documentation.
Security Recommendation:Upon first login,Supermicro strongly recommends changing the default BMC password immediatelyfor security reasons.
質問 # 14
When removing the GPU tray, where are the two screws located that must be loosened to allow the handles to be pulled out/down?
- A. Bottom of the GPU tray
- B. One on top and one on bottom of the GPU tray
- C. One on each side of the GPU tray
- D. Top of the GPU tray
正解：C
解説：
Toremove the GPU tray, you need toloosen two screwslocatedone on each side of the tray.
* Option B (Correct):There isone screw on each sidethat must beloosenedbefore pulling the handles out
/down.
* Option A (Incorrect):The screwsare not only on the top.
* Option C (Incorrect):The screwsare not only on the bottom.
* Option D (Incorrect):Thereis no screw configurationwithone on top and one on the bottom.
質問 # 15
When working on the GPU tray, where should you place it to ensure a safe work environment?
- A. A flat surface
- B. On top of the chassis
- C. On a cardboard box that may or may not support the weight of the tray
- D. On the floor where everyone is walking by
正解：A
解説：
When handling theGPU tray, it should be placed ona flat, stable surfacetoprevent damage and ensure safety.
* Option B (Correct):Aflat surfaceprovides stability and preventsaccidental damage or tipping.
* Option A (Incorrect):Placing the trayon top of the chassiscan cause it tofall and sustain damage.
* Option C (Incorrect):Thefloor is unsafedue tofoot traffic, riskingaccidental damage.
* Option D (Incorrect):Acardboard box may not support the tray's weight, making itunstable.
質問 # 16
What is the correct syntax for the AGFHC command to run recipes?
- A. ./agfhc -r alljvll.yml
- B. /agfhc -t -a alljvll.yml
- C. agfhc.exe -r-s alljvll.yml
- D. ./agchf-r alljvll.yml
正解：A
解説：
The correct syntax for running recipes using theAGFHC toolis:
bash
CopyEdit
/agfhc -r alljvll.yml
This command runsa specified YAML recipe file (alljvll.yml)using the AGFHC tool in aLinux-based system.
* Option A (Incorrect):Contains an incorrect flag (-r should be separated).
* Option B (Incorrect):Uses incorrect flag format (-t -a), which is not part of AGFHC syntax.
* Option C (Incorrect):Uses Windows-style .exe format, which is incorrect for Linux.
* Option D (Correct):This follows thecorrect AGFHC syntaxfor running recipes in a Linux environment.
質問 # 17
Which two situations could occur if you forcefully shift the release lever without first unlocking the red lock?(Choose 2 answers.)
- A. You could permanently damage the lock on the power supply unit.
- B. The power supply unit can no longer be secured into the tray.
- C. All the answers are correct.
- D. The power supply unit will fail.
正解：A、D
解説：
ForSupermicro MI300X GPU systems,removing the power supply unit (PSU) improperlycan lead to serious issues.
* Why the red lock exists?
* Thered locking mechanismensures that thePSU is properly securedin the system.
* Before disengaging the PSU, thered lock must first be unlockedto avoid damage.
* If you forcefully shift the release lever without unlocking the red lock:
* B: The power supply unit will fail# If the PSU is removed improperly, it can causeinternal damageto power connectors, resulting in PSUfailure or improper functioning.
* C: You could permanently damage the lock on the power supply unit# Thelocking mechanismis designed for smooth disengagement. Forcefully shifting the lever canbreak or warpthe lock, making itimpossible to secure the PSU back in place.
* Incorrect Answers Explained:
* A (All answers are correct)# This is incorrect becausenot all answers are valid.
* D (The PSU can no longer be secured into the tray)# This happensonly if the lock is damaged
, which is covered underoption C.
Supermicro's official documentation clearly statesthatunlocking the red lock firstis a critical step before removing or replacing the PSU.
質問 # 18
Which 2 ROCm commands should you run to gather AMD GPU information from the server?
- A. sudo rocm-gpu, sudo rocm-baseboardgpu
- B. sudo rocm-csv, and sudo rocm-amd.bug.txt
- C. sudo rocm-smi -a, and sudo rocm-smi
- D. sudo rockm-smc, and sudo rockm-bug.report.txt
正解：C
解説：
TheROCm System Management Interface (rocm-smi)is the recommended tool forgathering AMD GPU informationfrom the server.
* Option D (Correct):
* sudo rocm-smi -a displaysall available GPU information.
* sudo rocm-smi showsbasic GPU stats.
* Option A (Incorrect):These arenot valid ROCm commands.
* Option B (Incorrect):"rockm-smc" and "rockm-bug.report.txt"do not exist in ROCm.
* Option C (Incorrect):"rocm-gpu" and "rocm-baseboardgpu" arenot standard AMD diagnostic commands.
質問 # 19
What information is shown in the IPMI storage monitoring section?
- A. Severity of health events
- B. Overheating issues
- C. Attached storage devices
- D. The motherboard
正解：C
解説：
TheIPMI storage monitoring sectionprovides information aboutattached storage devices.
* Option A (Incorrect):IPMI doesnot display motherboard detailsin this section.
* Option B (Incorrect):Overheating issuesare logged separatelyin the event logs.
* Option C (Correct):IPMI storage monitoring tracks attached storage devices.
* Option D (Incorrect):Severity of health eventsis found in system logs, not storage monitoring.
質問 # 20
How many GPUs can be missing or undetected by the system to successfully execute the ROCm software commands?
- A. 0
- B. None
- C. 1
- D. 2
正解：D
解説：
The ROCm softwarerequires at least one GPU to function. It can stilloperate with up to 2 missing GPUs, butif 3 or more GPUs are missing, ROCm commands will fail.
* Option A (Incorrect):ROCmfails if 3 GPUs are missing.
* Option B (Incorrect):The software can function withmore than 1 GPU missing.
* Option C (Correct):ROCmcan still execute commands if only 1 or 2 GPUs are missing.
* Option D (Incorrect):At least 1 GPUmust be detected for ROCm to work.
質問 # 21
In which directory should the AGFHC tool be installed for it to function properly in Ubuntu?
- A. Directory - /windows/user/desktop
- B. Directory - /tmp/amd/AGFHC/files
- C. Directory - /usr/home/customer/AGFHC
- D. Directory - /opt/AMD/AGFHC
正解：D
解説：
TheAGFHC tool for Ubuntumust be installed in the/opt/AMD/AGFHCdirectory.
* Option A (Incorrect):The/tmp/directory istemporary storageand is not used forapplication installations.
* Option B (Incorrect):/windows/user/desktopis a Windows path and does not apply to Linux-based Ubuntu.
* Option C (Incorrect):/usr/home/customer/AGFHCis not the correct standard directory for system- wide software.
* Option D (Correct):/opt/AMD/AGFHCis the correct directory for installing AMD-related tools in Ubuntu.
質問 # 22
The syntax and options for the SUM command differ between Windows and Linux.
- A. False
- B. True
正解：B
解説：
TheSUM (Supermicro Update Manager) commandhas differentsyntax and optionsbetweenWindows and Linuxversions.
* OnWindows, the SUM command uses .exe files and standard Windows CLI syntax.
* OnLinux, SUM commands use native Linux paths, shell scripting, and different argument formatting.
For example:
* Windows:sum.exe -i 10.1.1.100 -p ADMIN -u ADMIN -c checkbasicinfo
* Linux:./sum -i 10.1.1.100 -p ADMIN -u ADMIN -c checkbasicinfo
Since syntax differs,the correct answer is True.
質問 # 23
What is the main reason the AGFHC tool is not functioning properly?
- A. CPU 2 is missing and the AGFHC requires 2 CPUs.
- B. Missing 1 DIMM in the system.
- C. PSU needs to be reseated.
- D. Missing 1 or more GPUs in the system.
正解：A
解説：
TheAGFHC tool requires a dual-CPU setupto function properly. IfCPU 2 is missing, the toolfails to operate correctly.
* Option A (Incorrect):Thetool does not depend on DIMM configuration.
* Option B (Incorrect):Missing GPUscan cause errors, butthe tool can still function.
* Option C (Correct):AGFHC requires both CPUsto be installed.
* Option D (Incorrect):PSU reseating isnot requiredfor AGFHC operation.
質問 # 24
......
SMI300XEプレミアム試験エンジンPDFをダウンロード：https://www.goshiken.com/Supermicro/SMI300XE-mondaishu.html
SMI300XE試験 [2025] 問題集でSupermicroのPDF問題：https://drive.google.com/open?id=19HfAt_m0I79Rg1d3JhiU7ifCQsInxrBV