[2025年02月] 無料156-582試験問題集試験点数を伸ばそう
2025年最新の156-582実際問題集には試験のコツがあるPDF試験材料
CheckPoint 156-582 認定試験の出題範囲：
| トピック | 出題範囲 |
|---|---|
| トピック 1 |
|
| トピック 2 |
|
| トピック 3 |
|
| トピック 4 |
|
| トピック 5 |
|
| トピック 6 |
|
| トピック 7 |
|
| トピック 8 |
|
質問 # 11
When managing the disk space for locally stored logs, the Delete threshold for the gateway cannot be more than what percentage of the total disk space?
- A. 25%
- B. 10%
- C. 75%
- D. 50%
正解：C
解説：
TheDelete thresholdfor managing locally stored logs on a Security Gateway should not exceed75%of the total disk space. This threshold ensures that there is ample space for new logs while preventing the disk from becoming overly full, which could lead to system instability or loss of logging capabilities.
質問 # 12
You need to capture NAT information into packet capture, what tool is the best suitable for this task?
- A. tcpdump
- B. fw ctl zdebug + xlate xltrc nat
- C. fw monitor
- D. cppcap
正解：C
解説：
fw monitoris the most suitable tool for capturing NAT information within packet captures. It allows administrators to specify NAT-related filters and capture detailed information about how packets are being translated as they pass through the firewall. This capability is essential for diagnosing and resolving NAT- related issues effectively.
質問 # 13
You tested the connection from source to destination and you are not able to find logs in your Security Management. What is the best possible reason?
- A. There is not enough storage in Security Management, so the logs can't be stored.
- B. The FWM process crashed on Security Management, therefore logging will not work.
- C. The logging blade was not enabled on Security Gateway.
- D. The gateway is logging locally.
正解：C
解説：
If logs are not appearing in the Security Management despite successful traffic flow, the most likely reason is that thelogging blade is not enabledon the Security Gateway. Without enabling the logging functionality, the gateway will not send logs to the Security Management Server, even though the traffic itself is passing through successfully.
質問 # 14
Which of the following CLI commands is best to use for getting a quick look at appliance performance information in Gaia?
- A. fw monitor
- B. fw stat
- C. cpview
- D. cphaprob stat
正解：C
解説：
The cpview command in Gaia provides a real-time, comprehensive view of the system's performance metrics, including CPU usage, memory utilization, and network statistics. This makes it the best choice for quickly assessing the performance of a Check Point appliance. Other commands like fw stat and fw monitor are more focused on firewall statistics and traffic monitoring, respectively. cphaprob stat is used for High Availability status checks, not general performance metrics.
質問 # 15
Which is the correct "fw monitor" syntax for creating a capture file for loading it into Wireshark?
- A. fw monitor -e "accept <FILTER EXPRESSION*;" > Output.cap
- B. fw monitor -e "accept <FILTER EXPRESSION^" -o Output.cap
- C. fw monitor -e "accept <FILTER EXPRESSION*;" -file Output.cap
- D. This cannot be accomplished as it is not supported with R80.10
正解：C
解説：
The correct syntax for using fw monitor to create a capture file compatible with Wireshark involves specifying the filter expression and the output file with the .cap extension. Option D correctly usesthe -e flag for the filter expression and the -file flag to specify the output file, ensuring the captured data can be seamlessly imported into Wireshark for analysis.
質問 # 16
Which of the following is NOT an account user classification?
- A. Administrator
- B. Licensers
- C. Manager
- D. Viewer
正解：B
解説：
In Check Point's user classification for the User Center portal, typical roles include Manager, Viewer, and Administrator. "Licensers" is not a standard user classification. Instead, licensing roles are usually managed under broader administrative categories. Therefore, "Licensers" is not recognized as a distinct user classification.
質問 # 17
What is the port for the Log Collection on Security Management Server?
- A. 0
- B. 1
- C. 2
- D. 3
正解：B
解説：
Port257is used for log collection on the Security Management Server. This port facilitates the transmission of log data from Security Gateways to the Management Server, ensuring that logs are centralized for monitoring, analysis, and reporting.
質問 # 18
What is the most efficient way to view large fw monitor captures and run filters on the file?
- A. CLISH
- B. snoop
- C. CLI
- D. Wireshark
正解：D
解説：
Wiresharkis the most efficient tool for viewing large fw monitor capture files. It provides powerful filtering capabilities, a user-friendly interface, and detailed packet analysis features that make handling large datasets manageable. While CLI tools like snoop and fw monitor offer basic packet viewing, they lack the advanced filtering and visualization options that Wireshark provides.
質問 # 19
Running tcpdump causes a significant increase in CPU usage, what other option should you use?
- A. I
- B. o
- C. O
- D. i
正解：A
解説：
(Note: The provided multiple-choice options for this question appear to be incomplete or incorrect. The best practice and commonly recommended alternative to tcpdump on Check Point to reduce CPU usage is cppcap.
If we assume option "C" corresponds to using cppcap, we select that.)
Given the context, the correct answer isC, assuming it refers to cppcap. cppcap is optimized for packet capturing in Check Point environments and is less CPU-intensive compared to tcpdump.
質問 # 20
Which of the following is true about tcpdump?
- A. The tcpdump can only capture TCP packets and not UDP packets
- B. Running tcpdump without the correct switches will negatively impact the performance of the Firewall
- C. A tcpdump session can be initiated from the SmartConsole
- D. The tcpdump has to be run from clish mode in Gaia
正解：B
質問 # 21
As a security administrator/engineer in your company, you have noticed that your HQ Check Point Security Management Server is not receiving logs from your HQ Check Point Gateway/Cluster. To investigate this issue in the command line, you will need to verify which process is running?
- A. cpd
- B. cpm
- C. fwd
- D. fwm
正解：C
解説：
To troubleshoot why the Security Management Server is not receiving logs from the Security Gateway or Cluster, you should verify the status of theFWDprocess. The fwd daemon handles log forwarding and ensures that logs are transmitted from the gateway to the management server. Checking if fwd is running and functioning correctly is essential for resolving log transmission issues.
質問 # 22
Where can a Check Point customer find information about product licenses they own, download product manuals, and get information about product support expiration?
- A. UserCenter portal
- B. PartnerMAP portal
- C. Smart Console
- D. In security management server via CLI and executing command cplic print
正解：A
解説：
TheUserCenter portalis the central hub where Check Point customers can access detailed information about their product licenses, download product manuals, and obtain information regarding product support expiration. This online portal provides a comprehensive view of all licensed products and services, facilitating effective license management and access to essential documentation.
質問 # 23
When accessing License Status In Smart Console, what information is available?
- A. Blade Name, Expiration Date, Attached to, Status
- B. License Status, Blade Name, Report available, Download
- C. Blade Name, License Status, Expiration Date, Additional info
- D. Expiration Date, Status, SKU, Signature Key
正解：A
解説：
In SmartConsole, when accessing theLicense Status, the following information is available:
* Blade Name: Identifies the specific security blade the license pertains to.
* Expiration Date: Indicates when the license will expire.
* Attached to: Shows which device or component the license is attached to.
* Status: Reflects the current state of the license (e.g., active, expired).
This information helps administrators monitor and manage their licenses effectively, ensuring that all security features remain operational.
質問 # 24
You need to capture NAT information into packet capture, what tool is the best suitable for this task?
- A. tcpdump
- B. fw ctl zdebug + xlate xltrc nat
- C. fw monitor
- D. cppcap
正解：C
解説：
fw monitoris the most suitable tool for capturing NAT information within packet captures. It allows administrators to specify NAT-related filters and capture detailed information about how packets are being translated as they pass through the firewall. This capability is essential for diagnosing and resolving NAT- related issues effectively.
質問 # 25
What is the default protection profile for Autonomous Threat Prevention?
- A. Bypass
- B. Internal
- C. Guest
- D. Perimeter
正解：D
解説：
ThePerimeterprotection profile is the default setting forAutonomous Threat Preventionin Check Point environments. This profile is designed to provide robust security measures at the network's perimeter, effectively mitigating threats and ensuring that incoming traffic is thoroughly inspected and filtered based on established security policies.
質問 # 26
You want to collect diagnostics data to include with an SR (Service Request). What command or utility best meets your needs?
- A. contracts_mgmt
- B. cpconfig
- C. cpplic
- D. cpinfo
正解：D
解説：
The cpinfo command is designed to collect comprehensive diagnostic information from a Check Point gateway or management server. This data is essential when submitting a Service Request (SR) to Check Point Support, as it includes configuration details, logs, and system information. cpconfig is used for configuration, cpplic manages licenses, and contracts_mgmt handles contract management, none of which are specifically tailored for collecting diagnostic data for SRs.
質問 # 27
How many captures does the command "fw monitor -p all" take?
- A. The -p option takes the same number of captures, but gathers all of the data packet
- B. All 4 points of the fw VM modules
- C. 1 from every inbound and outbound module of the chain
- D. All 15 of the inbound and outbound modules
正解：D
解説：
The commandfw monitor -p allinitiates packet capturing acrossall 15 inbound and outbound modules within the Check Point inspection chain. This comprehensive capture allows for thorough analysis of packet flow and behavior at every stage of processing, facilitating detailed troubleshooting and performance evaluation.
質問 # 28
How do you verify that Proxy ARP entries are loaded into the kernel?
- A. fw ctl get arp list all
- B. This information can be viewed in the logs, under NAT section of log, field: Proxy ARP entry
- C. fw ctl arp
- D. show arp dynamic all
正解：C
解説：
Thefw ctl arpcommand is used to verify that Proxy ARP entries are loaded into the kernel. This command provides detailed information about the current ARP table, including any Proxy ARP entries that have been established for NAT configurations. Ensuring that these entries are present confirms that the system is correctly handling ARP requests for NATed addresses.
質問 # 29
......
心強い156-582のPDF問題集は156-582問題：https://www.goshiken.com/CheckPoint/156-582-mondaishu.html
正真正銘の156-582問題集で無料PDF問題で合格させる：https://drive.google.com/open?id=1TZNOXLDEoXnh8EPWBBdRbm-VfUM8TCsn