[2025年03月]更新の301a試験問題集、301a練習テスト問題
検証済み301a問題集PDF資料 [2025]
F5 301A試験では、基本的および高度なLTMの概念、交通処理、高可用性など、Big-IP LTMに関連するさまざまなトピックをカバーしています。この試験では、ネットワークセキュリティ、SSLオフロード、およびアプリケーションの加速に関連するトピックもカバーしています。さらに、この試験では、仮想サーバー、プール、プロファイルなどのBig-IP LTMシステムの構成と管理をカバーしています。
質問 # 23
A virtual server is experiencing intermittent port exhaustion. What should be done to fix this issue?
- A. enable SNAT automap
- B. enable advanced routing
- C. add more SNAT addresses
- D. add more pool members
正解：C
質問 # 24
A new HITP server has been deployed on an LTM device. The application running on the server must be monitored by the LIM device. The following is required:
A new HITP server has been deployed on an LTM device. The application running on the server must be monitored by the LIM device. The following is required:
When the server is unavailable, it will send an HTTP status code of 200 in response to a request for the status html page.
When the server is available. I will send and HTTP status code of 201 in response to a request for the status html page.
When the 200 status code is received, the pool member should receive No new connections.
Which configuration change should be made to meet these requirements?
- A. set the Send String to GET Arian and the Receive String to 200 and Receive Disable String to 201.
- B. set the Send String to GET/ status html and the Receive String to 200 and Receive Disable String to 201.
- C. set the Send String to Get /status html and the Receive Disable String to 200 and Receive String to 201.
- D. set the Send String to GET Arian and the Receive Disable String to 200 and Receive String to 201.
正解：C
質問 # 25
An LTM Specialist needs to configure a setup for antivirus scanning of HTTP traffic with an internet Contact adaption Protocol (ICAP) server.
Which two server type should be used? (Choose two.)
- A. Stateless
- B. Standard
- C. Performance HTTP
- D. Forwarding IP
- E. Internal
正解：B、E
質問 # 26
An LTM is configure an application that is separated into several subdomains across multiple virtual servers. Many of these subdomains require encryption and could be accessed by anyone on the internet. The configuration must NOT result in SSL warnings to end users.
How should the LTM Specialist configure the SSL profiles for these virtual servers?
- A. Create a self-singed SSL certificate for each subdomain make a ClientSSL profile for each subdomain, and apply to the related SSL Virtual server
- B. Create a self-singed SSL certificate for each subdomain make a Client profile for each SSL Virtual Server
- C. Obtain a wildcard certificate, create one ClientSSL profile and apply to all SSL Virtual Servers
- D. Obtain an SSL certificate for each subdomain, make a ServerSSL profile for each subdomain, and apply to the related SSL Virtual Server.
正解：C
解説：
The topic is that there are multiple domain names in the business, and HTTPS services are provided to the internet, and users cannot be allowed to generate SSL alarms. The require client ssl and use CA certificate instead of self-singed certificate. And multiple domain names, you can use wildcard certificates.
質問 # 27
An LTM Specialist needs to create a virtual server to pass TCP traffic to three pool members.
Which two virtual server types should be used to meet the requirements? (Choose two)
- A. Forwarding (IP)
- B. Stateless
- C. Performance (Layer A)
- D. Standard
- E. Forwarding (Layer 2)
正解：C、D
質問 # 28
An LTM Specialist needs to enable TCP connection re-use for a non-HTTP application. The application uses a simple request response protocol where each request and response is contained within a single packet.
Which configuration option should the LTM Specialist adjust?
- A. use a Performance (Layer 4) Virtual Server
- B. increase the connection limit for pool members
- C. assign a OneConnect profile
- D. increase the idle Timeout in a custom TCP profile
正解：C
質問 # 29
A custom TCP application using a single server is being migrated to the LTM device. A server is being added to the pool. The application is known to violate the TCP protocol RFC. The application currently works without error from a user perspective.
Which virtual server type is appropriate in this situation?
- A. Stateless TCP protocol is not applicable
- B. Standard-tcp profile exists, RFC verification will be performed
- C. Performance (Layer 4)-pure layer A forwarding
- D. forwarding (Layer 2) pure routing forwarding, pool cannot be specified
正解：C
質問 # 30
One LTM device in an HA pair of LTM devices is unable to reach its default gateway. An HA Failover event needs to happen.
Which configuration item enables this behavior?
- A. Gateway Fail Safe
- B. Gateway pool monitor
- C. iRule
- D. Gateway pool
正解：A
質問 # 31
Consider the monitor configuration displayed below.
What is the status of a pool member that responds with ''200 OK''?
- A. available
- B. unknown
- C. disabled
- D. down
正解：D
質問 # 32
Which Standard Virtual Server settings should an LTM Specialist use to load balance across routed path of two different ISPs?
- A. address translation enabled and port translation disabled
- B. address translation disabled and port translation enabled
- C. both address and port translation enabled
- D. both address and port translation disabled
正解：C
質問 # 33
An LTM Specialist is configuring a virtual server with an IP address.
Which configuration is unsupported?
- A. Standard virtual server with a TCP profile
- B. Performance 14 virtual server with an HTTP profile
- C. Standard virtual server with an HTTP profile
- D. Performance 14 virtual server with a FastHTTP profile
正解：B
質問 # 34
A web application is configured as follows:
What should be modified to set a maximum request limit?
- A. Virtual server settings
- B. Pool settings
- C. ICP Profile
- D. HTTP profile
正解：D
質問 # 35
Refer to the exhibit.
The http monitor is applied to a pool All members are enabled One pool member stops responding TCP port 80. The server still responds to ping.
What is the resulting status of this pool member?
- A. Offline (Disabled)
- B. Unknown (Enabled)
- C. Available (Enabled)
- D. Unavailable (Disabled)
正解：C
質問 # 36
RADIUS authentication has been configured on the LTM device. The default remote user access requirements are as shown:
Read only access to the configuration Utility
Access to TMOS shell
Which two items need to be configured in this situation? (Choose two)
- A. Default remote user role is Guest
- B. Default remote user role is Operator
- C. In Console access is TMSH
- D. Console access is Advanced Shell
- E. Default remote user role is Manager
- F. Console access is Read Only
正解：C
質問 # 37
An LTM Specialist needs to create an iRule that creates persistence records based on a JSESSIONID cookie. If a persistence record already exists, then the iRule must persist the client connection according to the existing record.
Which persistence profile enables the iRule to meet these requirements?
- A. Universal
- B. Destination Address Affinity
- C. Source Address Affinity
- D. Cookie
- E. SSL
正解：A
質問 # 38
Exhibit.
Webserver_pool consists of 6 members. phpAuction_80_pool consists of 2 members LTM1 is the current Active member.
LTM1 loses connectivity to 3 of the 6 members in the webserver_pool LTM2 still has connectivity to all servers.
What is the expected failover behavior?
- A. LTM1 Standby / LTM2 Active
- B. LTM1 Active /LTM2 Active
- C. LTM1 Active / LTM2 Standby
- D. LTM1 Standby / LTM2 Standby
正解：C
質問 # 39
A node is assigned two monitors as seen in this configuration.
What is the status of a member that runs on that node and listens on port 443?
- A. UP
- B. UNKNOWN
- C. UNAVAILABLE
- D. DOWN
正解：C
質問 # 40
......
最新の301a実際の無料試験問題は更新された150問あります：https://www.goshiken.com/F5/301a-mondaishu.html
無料301a試験ブレーン問題集認定ガイド問題と解答：https://drive.google.com/open?id=1VPdwUo4HoIpX8B2zkJicjxRE_CbcieQG