[2025年04月] 検証済みCisco 010-151リアル豪華お試しセット試験問題集でPDF
010-151問題集PDF最新 [2025年最新] 究極の学習ガイド
Cisco 010-151 試験は、正式にはSupporting Cisco Datacenter Networking Devices（DCTECH）試験として知られています。これは、Ciscoデータセンターネットワークデバイスで作業するネットワーク技術者の能力をテストするための認定試験です。この試験は、データセンターのネットワークエンジニアとしてのキャリアを進めるための重要な第一歩です。
質問 # 70
Refer to the exhibit.
Which item does D represent?
- A. To view the Navigation pane
- B. Index Icon (view listing in alphabetical order)
- C. Favorite icon (make any specific work pane in the application as your favorite)
- D. Pin icon (prevents Navigation pane from sliding)
正解：D
質問 # 71
Which three steps do you perform to troubleshoot when a rack server powers on with no video? (Choose three.)
- A. Verify the power source to equipment.
- B. Check the front I/O cable connection to the motherboard.
- C. Check for memory subsystem failure.
- D. Reseat the DIMMs, CPU, and PCI cards.
- E. Check that the front I/O dongle is properly seated.
正解：B、C、E
質問 # 72
Which five things should the administrator verify after performing maintenance or replacing a blade server?
(Choose five.)
- A. fan and power status
- B. hard drive status
- C. mezzanine card status
- D. CPU status
- E. blade server status
- F. host OS boot status
- G. memory DIMM status
正解：B、C、D、E、G
質問 # 73
Refer to the exhibit.
Which item does A represent?
- A. Virtual Emulex Adapter Card for Cisco UCS B420 M3 Blade Servers
- B. SuperCap module for Cisco UCS B420 M3 Blade Servers
- C. mLOM for Cisco UCS B420 M3 Blade Servers
- D. Emulex Adapter Card for Cisco UCS B420 M3 Blade Servers
- E. Virtual Interface Card for Cisco UCS B420 M3 Blade Servers
正解：C
質問 # 74
Which command-line interface mode is best described by this prompt?
UCS-switch-A (nxos)#
- A. maintenance mode
- B. local management mode
- C. EXEC mode
- D. Cisco IOS mode
- E. global configuration mode
正解：C
質問 # 75
Which type of optics module is supported by a 6-port 40 GE Cisco Nexus 7000 M2 Series I/O module?
- A. CPAK
- B. QSFP+
- C. SFP/SFP+
- D. CFP
正解：B
質問 # 76
Refer to the exhibit.
Where is the best place to find the B200 BIOS version used in a specific Cisco UCS Manager version?
- A. D - Capability Catalog
- B. C - Images
- C. E - Management Extension
- D. B - Packages
- E. A - Installed Firmware
正解：D
質問 # 77
What is a function of a small form-factor pluggable (SFP)?
- A. SFP modules convert the serial electrical signals to serial analog signals and vice versa.
- B. SFP is a compact, hot-pluggable copper module transceiver.
- C. SFP modules offer a simple and effective way to connect a single network device to a wide variety of fiber cable types.
- D. SFP modules can be classified based on the working voltage and size.
正解：C
質問 # 78
Which two virtualization technologies are used in a modern data center design? (Choose two.)
- A. Server virtualization
- B. Cloud virtualization
- C. Application virtualization
- D. Storage virtualization
- E. Platform virtualization
正解：A、D
質問 # 79
Refer to the diagram, match the following Ethernet frame fields.
正解：
解説：
質問 # 80
Refer to the exhibit.
This image shows a CPU Pick-and-Place tool and a CPU Socket Protective Cap Removal tool. Which types of Cisco UCS servers and Intel Xeon processors do these tools support?
- A. Cisco UCS B200 M3 Blade Server, B420 M3 Blade Server, C220 Rack Server, C240 Rack Sever, and C420 Rack Sever with Intel Xeon E5-2400 Series processors
- B. Cisco UCS B22 Blade Server, C22 Rack Server, and C24 Rack Sever with Intel Xeon E5-2600 Series processors
- C. Cisco UCS B22 Blade Server, C22 Rack Server, and C24 Rack Sever with Intel Xeon E5-2400 Series processors
- D. Cisco UCS B200 M3 Blade Server, B420 M3 Blade Server, C220 Rack Server, C240 Rack Sever, and C420 Rack Sever with Intel Xeon E5-2600 Series processors
正解：D
質問 # 81
Up to what speed can Category 5 UTP cable transmit data?
- A. 10000 Mb/s
- B. 100 Mb/s
- C. 1000 Mb/s
- D. 10 Mb/s
正解：C
質問 # 82
Which two types of information does the show module NX-OS command display? (Choose two.)
- A. Module type
- B. Module ports type
- C. Module status
- D. Module license information
- E. Module IP address
正解：A、C
質問 # 83
Which tool is needed when servicing a UCS M5 server?
- A. M5 DIMM puller
- B. HDD removal tool
- C. PCle slot cover
- D. T-30 Torx driver
正解：D
質問 # 84
Which statement is true about cloud computing?
- A. It provides end-to-end server, application network service, and storage virtualization.
- B. It provides self-service, on-demand provisioning and a billing for corporate usage only.
- C. It increases total cost of ownership.
- D. Users usually own and maintain their own IT infrastructure and facility.
正解：A
質問 # 85
What are the two layers in the SAN hierarchy? (Choose two.)
- A. Switch layer
- B. Fabric layer
- C. Storage layer
- D. Protocol layer
- E. Connection layer
正解：B、C
質問 # 86
Which command can be used to exit to EXEC mode from this current mode?
switch(config-if) #
- A. Ctrl-L
- B. Ctrl-C
- C. end
- D. quit
- E. exit
正解：C
質問 # 87
Refer to the exhibit.
Where is the best place to see the power supply status of the blade server enclosure?
- A. D - Rack-Mounts - Servers
- B. C - Chassis1 - Servers
- C. A - Chassis 1
- D. B - Chassis 1 - PSUs
- E. E - Fabric Interconnects A - PSUs
正解：D
解説：
Explanation
質問 # 88
......
シスコ010-151試験は、複数選択問題から構成され、Pearson VUEを通じてオンラインで実施されます。受験者は90分間試験を受けることができ、合格点70%以上を取得する必要があります。シスコは、受験前に少なくとも1年間シスコデータセンターネットワーキングデバイスでの作業経験を持つことを推奨しています。
あなたを合格させるCisco試験で010-151試験問題集：https://www.goshiken.com/Cisco/010-151-mondaishu.html
010-151試験問題集PDF更新された問題集：https://drive.google.com/open?id=1Bv-ulq2IzeUG8oFgIrTw8g7NXD2l3Unq