[2025年06月27日]300-710練習試験問題集で試験99%合格率があります
最新の検証済み300-710問題と解答、合格保証もしくは全額返金
Cisco 300-710認定試験は、Cisco Firepowerでネットワークを保護するための専門知識を実証したいIT専門家にとって非常に価値のある認定です。この認定は、最新のセキュリティの脅威を軽減し、ネットワークインフラストラクチャを保護するために必要な知識とスキルを検証します。試験に合格するには、候補者は、ネットワークセキュリティの概念、脅威防衛技術、および火力管理と構成を確実に理解している必要があります。
質問 # 111
Which command is run on an FTD unit to associate the unit to an FMC manager that is at IP address 10.0.0.10, and that has the registration key Cisco123?
- A. configure manager local Cisco123 10.0.0.10
- B. configure manager add Cisco123 10.0.0.10
- C. configure manager local 10.0.0.10 Cisco123
- D. configure manager add 10.0.0.10 Cisco123
正解：D
解説：
Reference: https://www.cisco.com/c/en/us/td/docs/security/firepower/misc/fmc-ftd-mgmt-nw/fmc-ftd-mgmt-nw.html#id_106101
質問 # 112
Which component simplifies incident investigation with Cisco Threat Response?
- A. browser plug-in
- B. Cisco Secure Firewall appliance
- C. local CVE database
- D. Cisco AMP client
正解：A
解説：
Cisco Threat Response (CTR) is a security solution that helps simplify incident investigation and threat hunting. One of its components that significantly simplifies the investigation process is the browser plug-in. The browser plug-in integrates with CTR to provide contextual information directly within the browser, allowing security analysts to quickly view threat details, pivot to related information, and take appropriate actions without switching between multiple tools.
Features of the browser plug-in:
Provides real-time threat intelligence and context from various Cisco security products.
Allows security analysts to investigate incidents directly from web-based consoles.
Enhances efficiency by streamlining the workflow and reducing the time needed to gather and correlate information.
質問 # 113
An administrator is attempting to add a Cisco Secure Firewall Threat Defence device to Cisco Secure Firewall Management Center with a password of Cisco0480846211 480846211. The private IP address of the FMC server is 192.168.75.201. Which command must be used in order to accomplish this task?
- A. configure manager add 192.168.75.201/24 <reg_key>
- B. configure manager add 192.168.75.201 <reg_key>
- C. configure manager add 192.168.45.45 <reg_key> <nal-ld>
- D. configure manager add 192.168.75.201 255.255.255.0 <reg_key>
正解：B
解説：
To add a Cisco Secure Firewall Threat Defense (FTD) device to Cisco Secure Firewall Management Center (FMC), the correct command to use is configure manager add
192.168.75.201 <reg_key>.
This command registers the FTD device with the FMC using the FMC's IP address and the registration key provided during the FMC setup.
Command structure:
configure manager add <FMC_IP> <reg_key>
For the given scenario:
FMC IP address: 192.168.75.201
Registration key: provided during FMC setup
Thus, the correct command is:
configure manager add 192.168.75.201 <reg_key>
質問 # 114
An organization has noticed that malware was downloaded from a website that does not currently have a known bad reputation. How will this issue be addresses globally in the quickest way possible and with the least amount of impact?
- A. Cisco Talos will automatically update the policies.
- B. by denying outbound web access
- C. by Isolating the endpoint
- D. by creating a URL object in the policy to block the website
正解：A
質問 # 115
An engineer must investigate a connectivity issue and decides to use the packet capture feature on Cisco FTD.
The goal is to see the real packet going through the Cisco FTD device and see the Snort detection actions as a part of the output. After the capture-traffic command is issued, only the packets are displayed. Which action resolves this issue?
- A. Perform the trace within the Cisco FMC GUI instead of the Cisco FTD CLI.
- B. Use the capture command and specify the trace option to get the required information.
- C. Use the verbose option as a part of the capture-traffic command
- D. Specify the trace using the -T option after the capture-traffic command.
正解：B
質問 # 116
Which policy rule is included in the deployment of a local DMZ during the initial deployment of a Cisco NGFW through the Cisco FMC GUI?
- A. permit ip any
- B. a default DMZ policy for which only a user can change the IP addresses.
- C. no policy rule is included
- D. deny ip any
正解：C
質問 # 117
An engineer configures a network discovery policy on Cisco FMC. Upon configuration, it is noticed that excessive and misleading events filing the database and overloading the Cisco FMC. A monitored NAT device is executing multiple updates of its operating system in a short period of time. What configuration change must be made to alleviate this issue?
- A. Increase the number of entries on the NAT device.
- B. Change the method to TCP/SYN.
- C. Leave default networks.
- D. Exclude load balancers and NAT devices.
正解：D
解説：
Reference:
https://www.cisco.com/c/en/us/td/docs/security/firepower/60/configuration/guide/fpmc-config-guide-v60/Network_Discovery_Policies.html
質問 # 118
A company is in the process of deploying intrusion protection with Cisco FTDs managed by a Cisco FMC. Which action must be selected to enable fewer rules detect only critical conditions and avoid false positives?
- A. Connectivity Over Security
- B. No Rules Active
- C. Balanced Security and Connectivity
- D. Maximum Detection
正解：A
質問 # 119
An engineer is configuring multiple Cisco FTD appliances (or use in the network. Which rule must the engineer follow while defining interface objects in Cisco FMC for use with interfaces across multiple devices?
- A. Interface groups can contain interfaces from many devices.
- B. Interface groups can contain multiple interface types
- C. An interface cannot belong to a security zone and an interface group
- D. Two security zones can contain the same interface
正解：A
解説：
https://community.cisco.com/t5/network-security/ftd-interfaces/td-p/4406969
質問 # 120
Which two remediation options are available when Cisco FMC is integrated with Cisco ISE? (Choose two.)
- A. DHCP pool disablement
- B. host shutdown
- C. dynamic null route configured
- D. quarantine
- E. port shutdown
正解：D、E
質問 # 121
Which report template field format is available in Cisco FMC?
- A. bar chart
- B. box lever chart
- C. benchmark chart
- D. arrow chart
正解：A
解説：
https://www.cisco.com/c/en/us/td/docs/security/firepower/60/configuration/guide/fpmc-config- guide-v60/Working_with_Reports.html
質問 # 122
An administrator is working on a migration from Cisco ASA to the Cisco FTD appliance and needs to test the rules without disrupting the traffic. Which policy type should be used to configure the ASA rules during this phase of the migration?
- A. Access Control
- B. Prefilter
- C. identity
- D. Intrusion
正解：A
質問 # 123
A security engineer needs to configure a network discovery policy on a Cisco FMC appliance and prevent excessive network discovery events from overloading the FMC database? Which action must be taken to accomplish this task?
- A. Configure NetFlow exporters for monitored networks.
- B. Monitor only the default IPv4 and IPv6 network ranges.
- C. Exclude load balancers and NAT devices in the policy.
- D. Change the network discovery method to TCP/SYN.
正解：C
質問 # 124
An administrator configures new threat intelligence sources and must validate that the feeds are being downloaded and that the intelligence is being used within the Cisco Secure Firewall system. Which action accomplishes the task?
- A. Use the source status indicator to validate the usage
- B. Look at the connection security intelligence events
- C. View the threat intelligence observables to see the downloaded data
- D. Look at the access control policy to validate that the intelligence is being used
正解：A
質問 # 125
A network engineer detects a connectivity issue between Cisco Secure Firewall Management Centre and Cisco Secure Firewall Threat Defense Initial troubleshooting indicates that heartbeats and events not being received.
The engineer re-establishes the secure channels between both peers Which two commands must the engineer run to resolve the issue? (Choose two.)
- A. manage_procs.pl
- B. show history
- C. sudo stats_unified.pl
- D. sudo perfstats -Cq < /var/sf/rna/correlator-stats/now
- E. show disk-manager
正解：A、C
解説：
When connectivity issues are detected between Cisco Secure Firewall Management Center (FMC) and Cisco Secure Firewall Threat Defense (FTD) devices, and initial troubleshooting indicates that heartbeats and events are not being received, the engineer can run the following commands to resolve the issue by re-establishing secure channels and checking process statuses:
* manage_procs.pl: This script is used to manage and restart processes on the FTD device. Running this script can help restart any malfunctioning processes and re-establish connectivity between the FMC and FTD.
* sudo stats_unified.pl: This command provides detailed statistics and status of the unified system processes. It helps in diagnosing and resolving issues related to the secure channel and event reporting.
Steps:
* Access the FTD CLI.
* Run the command manage_procs.pl to restart processes.
* Run the command sudo stats_unified.pl to gather detailed process statistics and verify the status.
These commands help resolve connectivity issues by ensuring that all necessary processes are running correctly and secure channels are re-established.
References: Cisco Secure Firewall Threat Defense Configuration Guide, Chapter on Troubleshooting and CLI Commands.
質問 # 126
An engineer defines a new rule while configuring an Access Control Policy. After deploying the policy, the rule is not working as expected and the hit counters associated with the rule are showing zero.
What is causing this error?
- A. An incorrect application signature was used in the rule.
- B. The wrong source interface for Snort was selected in the rule.
- C. Logging is not enabled for the rule.
- D. The rule was not enabled after being created.
正解：A
質問 # 127
An engineer configures a network discovery policy on Cisco FMC. Upon configuration, it is noticed that excessive and misleading events filing the database and overloading the Cisco FMC.
A monitored NAT device is executing multiple updates of its operating system in a short period of time. What configuration change must be made to alleviate this issue?
- A. Increase the number of entries on the NAT device.
- B. Change the method to TCP/SYN.
- C. Leave default networks.
- D. Exclude load balancers and NAT devices.
正解：D
質問 # 128
The administrator notices that there is malware present with an .exe extension and needs to verify if any of the systems on the network are running the executable file. What must be configured within Cisco AMP for Endpoints to show this data?
- A. threat root cause
- B. file analysis
- C. prevalence
- D. vulnerable software
正解：B
質問 # 129
An engineer Is configuring a Cisco FTD device to place on the Finance VLAN to provide additional protection tor company financial data. The device must be deployed without requiring any changes on the end user workstations, which currently use DHCP lo obtain an IP address. How must the engineer deploy the device to meet this requirement?
- A. Deploy the device in transparent mode and enable the DHCP Server feature.
- B. Deploy the device in routed mode and allow DHCP traffic in the access control policies.
- C. Deploy the device in transparent mode and allow DHCP traffic in the access control policies
- D. Deploy the device in routed made aid enable the DHCP Relay feature.
正解：C
解説：
Explanation
Transparent mode allows the FTD device to act as a "bump in the wire" that does not affect the IP addressing of the network. The end user workstations will not need any changes to their configuration, as they will still receive an IP address from the same DHCP server. However, the FTD device must allow DHCP traffic in the access control policies, otherwise it will block the DHCP requests and replies1
質問 # 130
Refer to the exhibit.
An administrator is looking at some of the reporting capabilities for Cisco Firepower and noticed this section of the Network Risk report showing a lot of SSL activity that cloud be used for evasion. Which action will mitigate this risk?
- A. Use Cisco AMP for Endpoints to block all SSL connection
- B. Use SSL decryption to analyze the packets.
- C. Use Cisco Tetration to track SSL connections to servers.
- D. Use encrypted traffic analytics to detect attacks
正解：B
質問 # 131
......
Cisco 300-710試験は、Cisco Firepower（SNCF）を使用したネットワークの保護とも呼ばれ、Cisco Firepower Next-Generation Firwall（NGFW）アプライアンスの展開と管理の知識とスキルを検証したいネットワークセキュリティの専門家向けに設計された認定試験です。 。この試験は、Cisco Certified Network Professional Security（CCNP Security）認定トラックの一部であり、IT業界で最も求められている認定の1つです。
300-710リアル有効かつ正確な問題集397問題と解答が待ってます：https://www.goshiken.com/Cisco/300-710-mondaishu.html
300-710認証と実際の解答があります：https://drive.google.com/open?id=1kQ-qv-2g0qnr959IZSsw9EUvc4Xryir8