[2025年10月]更新のD-PST-DY-23試験問題と有効なD-PST-DY-23問題集PDF
D-PST-DY-23ブレーン問題集学習ガイドにはヒントとコツで試験合格を目指そう
質問 # 34
Which three file replication operations are available in PowerStore Manager? (Select 3)
- A. Reprotect
- B. Planned Failover
- C. Reverse
- D. Resynchronize
- E. Reprotect and Reverse
正解：A、C、D
質問 # 35
What are the IP requirements for ICW on PowerStore X and PowerStore T models?
- A. PowerStore T requires three storage IP addresses and PowerStore X requires five storage IP addresses
- B. PowerStore T requires seven storage IP addresses and PowerStore X requires three storage IP addresses
- C. PowerStore T requires four management IP addresses and PowerStore X requires six management IP addresses
- D. PowerStore T requires five management IP addresses and PowerStore X requires six management IP addresses
正解：C
質問 # 36
Refer to the Exhibit.
Which port location in the graphic is used for network management connectivity on a PowerStore X?
- A. 0
- B. 1
- C. 2
- D. 3
正解：D
質問 # 37
What are two minimum requirements for using VMware Site Recovery Manager (SRM) with PowerStore? (Choose two.)
- A. VMware vCenter Server and ESXi hosts version 6.5 and newer
- B. VMware SRM version 8.3 and newer
- C. VMware SRM version 8.0 and newer
- D. VMware vCenter Server and ESXi hosts version 6.7 and newer
正解：B、D
質問 # 38
A protection policy with snapshot and replication rules is applied to a file system.
What is the result?
- A. Both replication and snapshot rules get applied
- B. Applying the protection policy to the file system fails
- C. Replication rules get ignored and only snapshot rules get applied
- D. Snapshot rules get ignored and only replication rules get applied
正解：C
質問 # 39
When creating a new volume on a multi-appliance PowerStore cluster what determines on which appliance the volume will be automatically provisioned?
- A. Replication balancer
- B. Cluster balancer
- C. Resource balancer
- D. Node balancer
正解：C
質問 # 40
Which two statements are true of PowerStore File Migration import? (Choose two.)
- A. VNX2 arrays are supported with VDM.
- B. The source file system can be a replica.
- C. Both SMB and NFS are supported, but cannot be mixed.
- D. Snapshots and snapshot schedules are migrated
- E. PS arrays are supported with PowerPath.
正解：A、C
質問 # 41
A storage administrator has configured a VNX2 as a remote system.
Which Import External Storage migration architectural components are now established?
- A. Data path and management control path to the access host.
- B. Host Fibre Channel initiators are deregistered on the VNX2 storage system.
- C. Host iSCSI initiators are registered on the VNX2 storage system.
- D. Data path and management control path to the source storage system.
正解：D
質問 # 42
Which ports are recommended for use as the interconnect between the two Dell supplied Data Switches connected to PowerStore?
- A. Two 10 GigE
- B. Two 100 GigE
- C. Two 25 GbE
- D. Four 1 GbE
正解：B
質問 # 43
During the discovery step of implementation, an unconfigured PowerStore is unavailable.
Which firewall ports must be open for a successful discovery?
- A. TCP port 5353 and UDP port 5353
- B. TCP and UDP ports 443 and 80
- C. TCP port 80 and UDP port 80
- D. TCP port 8443 and UDP port 5353
正解：D
質問 # 44
Which network does the PowerStore use for communication to the cluster database?
- A. Storage
- B. Management
- C. ICM
- D. ICD
正解：C
質問 # 45
What are two properties of the VMware file system which are supported by PowerStore? (Choose two.)
- A. Supports VAAI primitives
- B. Available with VMFS datastores
- C. Supports quotas
- D. Available with NFS datastores
正解：A、B
質問 # 46
Use the simulator to create an SMB NAS server using the following information:
* NAS and SMB computer name: payrollserver
* Network interface: BaseEnclosure-bond1
* IP address: 192.168.2.20
* Subnet: /24
* Gateway: 192.168.2.254
* VLAN: 1504
* AD/DNS: 192.168.2.50
* Windows domain name: company.com
* Domain administrator credentials: Administrator/password
When you have finished continue to the next question.
正解：
解説：
See the Explanation below for complete solution.
Explanation:
1. Open the simulator and log in with the default credentials: admin/Password123#.
2. SelectStorage>NAS Serversfrom the left menu.
3. Click+ CREATEto launch the Create NAS Server wizard.
4. Enterpayrollserveras the NAS and SMB computer name and clickNext.
5. SelectBaseEnclosure-bond1as the network interface and clickNext.
6. Enter192.168.2.20as the IP address,/24as the subnet,192.168.2.254as the gateway, and1504as the VLAN ID. ClickNext.
7. SelectJoin a Windows domainas the SMB server type and clickNext.
8. Enter192.168.2.50as the AD/DNS server,company.comas the Windows domain name,Administratoras the domain administrator username, andpasswordas the domain administrator password. ClickNext.
9. Review the summary and clickFinishto create the SMB NAS server.
質問 # 47
What does a Logical Unit Number (LUN) represent in PowerStore provisioning?
- A. A network switch
- B. A backup schedule
- C. A physical storage disk
- D. A virtual storage volume
正解：D
質問 # 48
What is the maximum number of snapshot rules per cluster?
- A. 0
- B. 1
- C. 2
- D. 3
正解：A
質問 # 49
Which storage protocol is commonly used for block-level access in PowerStore environments?
- A. HTTP (Hypertext Transfer Protocol)
- B. iSCSI (Internet Small Computer System Interface)
- C. NFS (Network File System)
- D. SMB (Server Message Block)
正解：B
質問 # 50
How many volumes can be created at a time using the PowerStore Manager?
- A. 0
- B. 1
- C. 2
- D. 3
正解：B
質問 # 51
A PowerStore user has a business need for file system snapshots of NAS Server NAS1 with the following attributes:
Taken M-F every 2 hours
Retention of 2 days
The snapshots must be accessible through the Previous Versions menu in Windows Using the PowerStore Simulator, make the appropriate configuration change.
When you have finished, continue to the next question.
正解：
解説：
see the Explanation for the solution.
1. Launch the PowerStore Simulator and log in with the admin credentials.
2. On the left navigation pane, click Protection and then click Protection Policies.
3. Click Create Policy and enter a name and description for the policy, such as NAS1 Snapshot Policy.
4. Under Snapshot Rules, click Add Rule and configure the following settings:
5. Name: Enter a name for the rule, such as NAS1 Snapshot Rule.
6. Schedule: Select Custom and enter the following cron expression: 0 */2 * * 1-5. This expression means that the snapshots will be taken every 2 hours on Monday to Friday
7. Retention: Select Until and enter 2 days. This means that the snapshots will be deleted after 2 days.
8. Access Type: Select Snapshot. This means that the snapshots will be accessible through the Previous Versions menu in Windows
9. Click Save to create the snapshot rule and then click Next.
10. Under Replication Rules, click Skip. This means that no replication rule will be added to the policy.
11. Click Next and then click Finish to create the protection policy.
12. On the left navigation pane, click Storage and then click File Systems.
13. Select the file system that belongs to NAS Server NAS1 and click More Actions.
14. Click Edit and then click Protection Policy.
15. Select the protection policy that was created in the previous steps, such as NAS1 Snapshot Policy, and click Save.
16. Click Confirm to apply the protection policy to the file system.
質問 # 52
At what point in the configuration of an External Storage import session does the data path from the host to the PowerStore system become the active I/O path?
- A. Duringthe ImportKit installation
- B. When the import session begins
- C. As MPIO restarts on the host
- D. Before launching the Import Storage wizard
正解：C
質問 # 53
In PowerStore, what is the function of a host group?
- A. To organize user accounts
- B. To group storage nodes together
- C. To categorize different storage pools
- D. To manage access to storage resources for specific hosts
正解：D
質問 # 54
What is the main benefit of VMware provisioning with PowerStore vVols over traditional storage provisioning methods?
- A. Increased CPU utilization
- B. Enhanced network performance
- C. Improved file sharing capabilities
- D. Simplified storage management
正解：D
質問 # 55
......
EMC D-PST-DY-23試験（Dell PowerStore Deploy 2023試験とも呼ばれる）は、IT業界で最も人気のある認定試験の1つです。この試験は、Dell PowerStoreストレージソリューションを展開および管理する責任を持つIT専門家を対象としています。試験では、Dell PowerStoreソリューションのインストール、設定、トラブルシューティングなど、幅広いトピックがカバーされます。
EMC D-PST-DY-23（Dell PowerStore Deploy 2023）試験は、Dell Technologiesによって認定されたベンダー固有の認定試験です。試験に合格することで、個人がさまざまな環境でDell PowerStoreストレージソリューションを展開および管理するために必要な知識とスキルを持っていることを証明します。この認定は、個人のキャリアの見通しを改善し、ストレージおよびデータ管理分野でより高度な役割を担うことを可能にすることができます。
D-PST-DY-23試験問題無料PDFダウンロード 最近更新された問題です：https://www.goshiken.com/EMC/D-PST-DY-23-mondaishu.html
D-PST-DY-23認定試験問題集には220練習テスト問題：https://drive.google.com/open?id=1ycGueX_jyzFWrhlXqEcI7Wi2lOzs6P4d