[2026年03月11日] 信頼され続ける350-701試験のコツがあるPDF試験材料
2026年最新の350-701テスト解説（更新されたのは727問があります)
Cisco 350-701試験は、90-110の質問で構成される120分間の試験です。この試験は、Pearson Vueテストセンターで実施されるコンピューターベースのテストです。この試験では、ネットワークセキュリティ、クラウドセキュリティ、コンテンツセキュリティ、エンドポイント保護と検出、セキュアネットワークアクセス、可視性と執行、セキュリティの自動化などの分野のIT専門家の知識をテストします。この試験は、エンドポイント用のCisco Identity Services Engine（ISE）、Cisco Firepower、Cisco StealthWatch、Cisco AmpなどのCisco Identity Services Engine（ISE）、Cisco Security Technologiesと協力する能力をテストするように設計されています。
質問 # 54
Which feature within Cisco ISE verifies the compliance of an endpoint before providing access to the network?
- A. Profiling
- B. pxGrid
- C. MAB
- D. Posture
正解：D
質問 # 55
Which feature enables a Cisco ISR to use the default bypass list automatically for web filtering?
- A. company key
- B. connector
- C. filters
- D. group key
正解：B
解説：
A connector is a feature that enables a Cisco ISR to use the default bypass list automatically for web filtering.
A connector is a software component that runs on the ISR and communicates with the Cloud Web Security service. The connector intercepts the web traffic from the branch users and redirects it to the Cloud Web Security service for scanning and policy enforcement. The connector also maintains a default bypass list, which contains the domains and URLs that are not redirected to the Cloud Web Security service. The default bypass list is updated automatically by the Cloud Web Security service and can be customized by the administrator. The default bypass list helps to improve the performance and reliability of the web filtering solution by avoiding unnecessary redirections of trusted or sensitive web traffic12. References: 1: Security Configuration Guide: Cloud Web Security, Cisco IOS Release 15M&T - Cisco Integrated Services Routers Generation 2 with Cisco Cloud Web Security Solution [Support] - Cisco 2: Security Configuration Guide:
Cloud Web Security, Cisco IOS Release 15M&T - Configuring Cloud Web Security on Integrated Services Routers Generation 2 [Support] - Cisco
質問 # 56
Which policy represents a shared set of features or parameters that define the aspects of a managed device that are likely to be similar to other managed devices in a deployment?
- A. Platform Service Policy
- B. Group Policy
- C. Access Control Policy
- D. Device Management Policy
正解：A
解説：
Cisco Firepower deployments can take advantage of platform settings policies. A platform settings policy is a shared set of features or parameters that define the aspects of a managed device that are likely to be similar to other managed devices in your deployment, such as time settings and external authentication. Examples of these platform settings policies are time and date settings, external authentication, and other common administrative features. A shared policy makes it possible to configure multiple managed devices at once, which provides consistency in your deployment and streamlines your management efforts. Any changes to a platform settings policy affects all the managed devices where you applied the policy. Even if you want different settings per device, you must create a shared policy and apply it to the desired device. For example, your organization's security policies may require that your appliances have a "No Unauthorized Use" message when a user logs in. With platform settings, you can set the login banner once in a platform settings policy. Reference: https://www.cisco.com/c/en/us/td/docs/security/firepower/620/configuration/guide/fpmc-configguide-v62/platform_settings_policies_for_managed_devices.html Therefore the answer should be "Platform Settings Policy", not "Platform Service Policy" but it is the best answer here so we have to choose it.
administrative features.
A shared policy makes it possible to configure multiple managed devices at once, which provides consistency in your deployment and streamlines your management efforts. Any changes to a platform settings policy affects all the managed devices where you applied the policy. Even if you want different settings per device, you must create a shared policy and apply it to the desired device.
For example, your organization's security policies may require that your appliances have a "No Unauthorized Use" message when a user logs in. With platform settings, you can set the login banner once in a platform settings policy.
Reference:
Therefore the answer should be "Platform Settings Policy", not "Platform Service Policy" but it is the best Cisco Firepower deployments can take advantage of platform settings policies. A platform settings policy is a shared set of features or parameters that define the aspects of a managed device that are likely to be similar to other managed devices in your deployment, such as time settings and external authentication. Examples of these platform settings policies are time and date settings, external authentication, and other common administrative features. A shared policy makes it possible to configure multiple managed devices at once, which provides consistency in your deployment and streamlines your management efforts. Any changes to a platform settings policy affects all the managed devices where you applied the policy. Even if you want different settings per device, you must create a shared policy and apply it to the desired device. For example, your organization's security policies may require that your appliances have a "No Unauthorized Use" message when a user logs in. With platform settings, you can set the login banner once in a platform settings policy. Reference: https://www.cisco.com/c/en/us/td/docs/security/firepower/620/configuration/guide/fpmc-configguide-v62/platform_settings_policies_for_managed_devices.html Therefore the answer should be "Platform Settings Policy", not "Platform Service Policy" but it is the best answer here so we have to choose it.
質問 # 57
Which two features of Cisco DNA Center are used in a Software Defined Network solution? (Choose two.)
- A. assurance
- B. encryption
- C. accounting
- D. automation
- E. authentication
正解：A、D
解説：
Explanation/Reference: https://www.cisco.com/c/en/us/products/cloud-systems-management/dna-center/index.html
質問 # 58
An administrator wants to ensure that all endpoints are compliant before users are allowed access on the corporate network. The endpoints must have the corporate antivirus application installed and be running the latest build of Windows 10.
What must the administrator implement to ensure that all devices are compliant before they are allowed on the network?
- A. Cisco Identity Services Engine with PxGrid services enabled
- B. Cisco Identity Services Engine and AnyConnect Posture module
- C. Cisco Stealthwatch and Cisco Identity Services Engine integration
- D. Cisco ASA firewall with Dynamic Access Policies configured
正解：B
質問 # 59
Refer to the exhibit.
What is a result of the configuration?
- A. All TCP traffic is redirected
- B. Traffic from the inside and DMZ networks is redirected
- C. Traffic from the DMZ network is redirected
- D. Traffic from the inside network is redirected
正解：B
質問 # 60
Which benefit does DMVPN provide over GETVPN?
- A. DMVPN supports QoS, multicast, and routing, and GETVPN supports only QoS.
- B. DMVPN supports non-IP protocols, and GETVPN supports only IP protocols.
- C. DMVPN is a tunnel-less VPN, and GETVPN is tunnel-based.
- D. DMVPN can be used over the public Internet, and GETVPN requires a private network.
正解：D
質問 # 61
Refer to the exhibit.
A network administrator configured a site-to-site VPN tunnel between two Cisco IOS routers, and hosts are unable to communicate between two sites of VPN. The network administrator runs the debug crypto isakmp sa command to track VPN status. What is the problem according to this command output?
- A. authentication key mismatch
- B. interesting traffic was not applied
- C. encryption algorithm mismatch
- D. hashing algorithm mismatch
正解：A
解説：
The debug crypto isakmp sa command shows the status of the Internet Security Association and Key Management Protocol (ISAKMP) security associations (SAs). The output of this command indicates that the ISAKMP negotiation failed after several retransmissions. The most likely cause of this failure is a mismatch in the authentication key between the two peers. The authentication key is specified by the crypto isakmp key command and must be the same on both routers. If the authentication key is different, the ISAKMP messages cannot be decrypted and verified by the peers, resulting in an error. To fix this problem, the network administrator should verify and correct the authentication key on both routers and clear the existing ISAKMP SAs with the clear crypto isakmp sa command. References: 1, 2, 3, 4
質問 # 62
A network administrator is using the Cisco ESA with AMP to upload files to the cloud for analysis. The network is congested and is affecting communication. How will the Cisco ESA handle any files which need analysis?
- A. The file upload is abandoned.
- B. AMP calculates the SHA-256 fingerprint, caches it, and periodically attempts the upload.
- C. The ESA immediately makes another attempt to upload the file.
- D. The file is queued for upload when connectivity is restored.
正解：A
解説：
The appliance will try once to upload the file; if upload is not successful, for example because of connectivity problems, the file may not be uploaded. If the failure was because the file analysis server was overloaded, the upload will be attempted once more.
The appliance will try once to upload the file; if upload is not successful, for example because of connectivity problems, the file may not be uploaded. If the failure was because the file analysis server was overloaded, the upload will be attempted once more.
Reference:
In this question, it stated "the network is congested" (not the file analysis server was overloaded) so the appliance will not try to upload the file again.
The appliance will try once to upload the file; if upload is not successful, for example because of connectivity problems, the file may not be uploaded. If the failure was because the file analysis server was overloaded, the upload will be attempted once more.
In this question, it stated "the network is congested" (not the file analysis server was overloaded) so the In this question, it stated "the network is congested" (not the file analysis server was overloaded) so the appliance will not try to upload the file again.
質問 # 63
An organization recently installed a Cisco W3A and would like to take advantage of the AVC engine to allow the organization to create a policy to control application specific activity.After enabling Ihe AVC engine,what must be done to implement this?
- A. Use an access policy group to configure application control settings.
- B. Use URL categorization to prevent the application traffic.
- C. Use web security reporting to validate engine functionality.
- D. use security services to configure the traffic monitor.
正解：A
質問 # 64
An organization has two systems in their DMZ that have an unencrypted link between them for communication.
The organization does not have a defined password policy and uses several default accounts on the systems.
The application used on those systems also have not gone through stringent code reviews. Which vulnerability would help an attacker brute force their way into the systems?
- A. lack of input validation
- B. missing encryption
- C. weak passwords
- D. lack of file permission
正解：B
解説：
The version 9 export format uses templates to provide access to observations of IP packet flows in a flexible and extensible manner. A template defines a collection of fields, with corresponding descriptions of structure and semantics.
質問 # 65
Which functions of an SDN architecture require southbound APIs to enable communication?
- A. management console and the SDN controller
- B. SDN controller and the cloud
- C. management console and the cloud
- D. SDN controller and the network elements
正解：D
解説：
Explanation
The Southbound API is used to communicate between Controllers and network devices
質問 # 66
An organization has a Cisco Stealthwatch Cloud deployment in their environment. Cloud logging is working as expected, but logs are not being received from the on-premise network, what action will resolve this issue?
- A. Deploy a Cisco FTD sensor to send events to Cisco Stealthwatch Cloud
- B. Deploy a Cisco Stealthwatch Cloud sensor on the network to send data to Cisco Stealthwatch Cloud You can also monitor on-premises networks in your organizations using Cisco Stealthwatch Cloud. In order to do so, you need to deploy at least one Cisco Stealthwatch Cloud Sensor appliance (virtual or physical appliance).
- C. Configure security appliances to send syslogs to Cisco Stealthwatch Cloud
- D. Configure security appliances to send NetFlow to Cisco Stealthwatch Cloud
正解：B
質問 # 67
Refer to the exhibit.
An engineer must configure a Cisco switch to perform PPP authentication via a TACACS server located at IP address 10.1.1.10. Authentication must fall back to the local database using the username LocalUser and password C1Sc0451069341l if the TACACS server is unreachable.
Drag and drop the commands from the left onto the corresponding configuration steps on the right.
正解：
解説：
Explanation:
質問 # 68
DoS attacks are categorized as what?
- A. flood attacks
- B. virus attacks
- C. phishing attacks
- D. trojan attacks
正解：A
解説：
DoS attacks are categorized as flood attacks or crash attacks. Flood attacks are the more common form of DoS attacks. They occur when the attacked system is overwhelmed by large amounts of traffic that the server is unable to handle. The system eventually stops. Some examples of flood attacks are ICMP flood, SYN flood, and UDP flood. Crash attacks are less frequent and they exploit flaws in the targeted system. The result is that the system crashes. Some examples of crash attacks are Ping of Death, Teardrop, and Land. References:
* What is a denial-of-service (DoS) attack? | Cloudflare
* What is a Denial of Service (DoS) attack? | Norton
* What is a Denial of Service (DoS) Attack? | Cobalt
* What is a denial of service attack (DoS) - Palo Alto Networks
質問 # 69
What Cisco command shows you the status of an 802.1X connection on interface gi0/1?
- A. show authorization status
- B. show ver gi0/1
- C. show connection status gi0/1
- D. show authen sess int gi0/1
正解：D
解説：
The command show authen sess int gi0/1 displays the authentication session information for the interface gi0/1, such as the MAC address, the authentication method, the authentication state, the session timeout, and the VLAN assignment. This command is useful for verifying the status of an 802.1X connection on a specific interface. The other commands are not related to 802.1X authentication. The command show authorization status displays the authorization status for the current user. The command show connection status gi0/1 is not a valid Cisco command. The command show ver gi0/1 displays the version information for the interface gi0/1. References: 802.1X Authentication Commands, Configuring IEEE 802.1x Port-Based Authentication, What Cisco command shows you the status of an 802.1X connection on interface gi0/1?
質問 # 70
......
Cisco 350-701は、コアセキュリティテクノロジーの実装と運用における候補者の知識とスキルを測定する認定試験です。この試験は、Cisco Certified Network Professional（CCNP）Security認定トラックの一部であり、企業環境においてCiscoセキュリティソリューションの実装と維持を担当するセキュリティプロフェッショナルを対象としています。この認定試験は、ネットワークセキュリティ、セキュアアクセス、クラウドセキュリティ、エンドポイント保護、セキュアネットワークインフラストラクチャなどの領域における候補者の知識とスキルを検証します。
350-701認定ガイドPDFは100%カバー率でリアル試験問題：https://www.goshiken.com/Cisco/350-701-mondaishu.html
350-701試験問題集を提供していますCisco問題：https://drive.google.com/open?id=17hUwRj3p0rJ-o6kA9irznRcaNKTWXcp8