[2026年06月16日] 究極の350-601準備ガイド！無料最新のCisco練習テスト問題集
今すぐゲットせよ！高評価Cisco 350-601試験問題集
Cisco 350-601試験は、90〜110の質問で構成される120分間のテストです。これは、データセンターテクノロジーでキャリアを進めたいIT専門家にとって重要な認証です。この試験では、ネットワーク仮想化、ストレージネットワーキング、データセンターネットワーキング、自動化など、さまざまなトピックに関する候補者をテストします。
質問 # 180
Refer to the exhibit.
Which type of backup is required to restore a Cisco UCS configuration?
- A. logical configuration
- B. all configuration
- C. system configuration
- D. full state
正解：C
解説：
https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/sw/cli/config/guide/1-0-2/b_CLI_Config_Guide_1-0-2/CLI_Config_Guide_1-0-2_chapter29.pdf
質問 # 181
Drag and Drop Question
Refer to the exhibit. An engineer must monitor the Ethernet port and the corresponding VLAN traffic for the hyper4 device. The SW3 device is a Cisco Nexus 7000 Series Switch. Drag and drop the code snippets from the right into the boxes in the configuration to meet these requirements.
正解：
解説：
質問 # 182
A network administrator is creating a custom Django self-service portal that runs on a Linux server to automate the creation of new VLANs on Cisco UCS Manager.
Which feature must De installed and configured on the server?
- A. Cisco UCS Python SDK
- B. Cisco DNA Center API
- C. Cisco AppDynamics
- D. Cisco ucs Powertool Suite
正解：A
質問 # 183
An engineer must configure a user role interface policy on a Cisco Nexus 9000 Series Switch.
The role must prevent access to interface FC3/2 but allow access to interface FC3/1. Which set of actions must be taken to accomplish this goal?
- A.
- B.
- C.
- D.
正解：D
解説：
To create a user role interface policy that denies access to interface FC3/2 but allows access to interface FC3/1, you need to:
Configure a deny interface policy to explicitly deny the interfaces you don't want the user to access.
Then, permit access to the interface that should be allowed.
The configuration correctly applies this logic:
Configure deny interface policy to deny access.
Permit interface FC3/2 and Deny interface FC3/1 ensure that only FC3/1 is accessible.
質問 # 184
Refer to the exhibit.
Which two statements describe the routing table of the leaf switch? (Choose two.)
- A. 10.20.1.0/24 is a BD subnet in ACI.
- B. 172.16.100.0/24 is a BD subnet in ACI.
- C. The next hop 10.0.8.65 for route 10.20.1.0724 is the TEP address of a border leaf in ACI.
- D. The next hop 10.1.168.95 for route 172.16.100 0/24 is the TEP address of a border leaf in ACI.
- E. The next hop 10.0.1.14 for route 172.16.99.0/24 is the TEP address of a border leaf in ACI.
正解：A、E
質問 # 185
An engineer must deploy a UCS-X platform to a customer that requires an air gap between their management systems and the internet Which Intersight deployment option must be used to accomplish this goal?
- A. Intersight Assistant
- B. Intersight Private Appliance
- C. Intersight Connected Appliance
- D. Intersight Secure Appliance
正解：B
質問 # 186 
Refer to the exhibit. An engineer must configure a QoS policy that controls only vHBA traffic. Which policy must be used to meet this requirement?
- A. Best Effort
- B. Fibre Channel
- C. Platinum
- D. Gold
正解：B
質問 # 187
Which NFS version uses the TCP protocol and needs only one IP port to run the service?
- A. NFSv1
- B. NFSv3
- C. NFSv4
- D. NFSv2
正解：C
解説：
One big advantage of NFSv4 over its predecessors is that only one UDP or TCP port, 2049, is used to run the service, which simplifies using the protocol across firewalls.
質問 # 188
An engineer must implement protection against ICMP DoS attacks on a Cisco Nexus 9000 Series Switch. The requirement is to rate-limit ICMP without denying all other ICMP traffic. The ICMP trafic currently passing through the Cisco Nexus 9000 device must not be affected. Which configuration accomplishes these goals?
- A. Create an access list to deny ICMP traffic and apply it to all interlaces in the inside direction.
- B. Reconfigure the Layer 3 interfaces to be in the non-default VRF and ICMP broadcast storm control
- C. Apply a control plane service policy that matches all ICMP traffic to drop the traffic fiat exceeds the threshold.
- D. Configure SNMP traps to send the ICMP notification if the CPU utilization is more than 90%.
正解：C
解説：
Applying a control plane service policy with a rate-limiting feature allows the engineer to match all ICMP traffic and set a threshold for it. Traffic that exceeds this threshold can be dropped, thus mitigating the risk of ICMP-based DoS attacks while allowing legitimate ICMP traffic to pass through. This method ensures that the current ICMP traffic is not affected as long as it does not exceed the configured rate limit12.
References := For detailed steps on configuring rate limits and control plane policing on Cisco Nexus 9000 Series Switches, you can refer to the Cisco Nexus 9000 Series NX-OS Security Configuration Guide12. This guide provides comprehensive information on securing your network infrastructure and protecting against various types of attacks, including DoS attacks. It also covers the configuration of security features like rate limits and control plane policies to ensure network stability and security
質問 # 189 
Refer to the exhibit. An engineer must configure FCoE between the N9K-A switch and the FCF-A Nexus
9000 core switch. The deployment has these characteristics:
* The N9K-Aand N9K-B top-of-rack switches share the domain ID of the core switches.
* The hosts are equipped with converged network adapters.
* The only VSAN that is permitted to traverse port-channel 100 is VSAN 20.
Which configuration completes the FCoE configuration on the N9K-A device?
- A. Option C
- B. Option B
- C. Option A
- D. Option D
正解：A
質問 # 190
Service degradation is reported on a VM that is deployed on a Cisco UCS blade server. The traffic from the vNIC is required to SPAN in both directions to a packet analyzer that is connected to UCS-A slot 2 port 12.
Which two commands are needed to complete the configuration? (Choose two.)
- A. UCS-A/org/service-profile/vnic/mon-src* # set direction both
- B. UCS-A/eth-1raffic-mon/fabric/eth-mon-session* # create eth-mon-session/dest-interface 2 12
- C. UCS-A/eth-traffic- mon/fabric/eth -mon-session* # create dest-interface 2 12
- D. UCS-A/eth-traffic-mon/fabric/eth-mon-session # activate
- E. UCS-A/org/service-profile/vnic/mon-src* # set direction receiv# transmit
正解：A、C
質問 # 191
A network engineer needs a solution that simplifies the initial deployment of Cisco Nexus Series Switches. The solution must support these requirements:
- zero-touch provisioning
- configuration through DHCP options
- initial configuration from a central TFTP server
- no manual configuration management after the initial installation
Which technology supports these goals?
- A. POAP
- B. Cisco Intersight
- C. Chef
- D. Ansible
正解：A
質問 # 192
Drag and Drop Question
An engineer must shut down the Ethernet 1/2 interface when the Ethernet 4/5 interface state is down. Drag and drop the CLI commands from the bottom onto the blanks in the exhibit to implement this EEM. Not all commands are used.
正解：
解説：
質問 # 193
Refer to the exhibit.
Cisco Fabric Services is enabled in the network. Which type of IP address is used by the Cisco Fabric Services protocol?
- A. IPv4 multicast address
- B. IPv4 unicast address
- C. IPv4 anycast address
- D. IPv4 gateway address
正解：A
解説：
質問 # 194
Refer to the exhibit.
Which two Cisco UCS components are upgraded as a result of the configuration? (Choose two.)
- A. board controller
- B. IOMs
- C. BIOS
- D. Cisco UCS Manager
- E. adapters
正解：A、C
解説：
Explanation
質問 # 195
A Cisco MDS 9000 series storage Switch has reloaded unexpectedly. Where does the engineer look for the latest core dump file?
- A. /mnt/pss
- B. /mnt/recovery
- C. /mnt/logs
- D. /mnt/core
正解：A
質問 # 196
Refer to the exhibit.
A network engineer plans to upgrade the current software images of a Cisco Nexus switch. What is the impact of starting the EPLD upgrade?
- A. The switch skips the EPLD upgrade for MIFPGA and proceeds with the other EPLD devices.
- B. The switch reboots one time for the new EPLD versions to take effect.
- C. The switch reboots multiple times for the new EPLD versions to take effect.
- D. The switch skips the EPLD upgrade for each EPLD device of the switch.
正解：D
解説：
https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus9000/sw/92x/epld-rn/nxos_n9K_epldRN_924.html
質問 # 197
Refer to the exhibit.
Which two statements about the routing table of the leaf switch are true? (Choose two.)
- A. The next hop 10.0.8.65 for route 10.20.1.0./24 is the TEP address of a border leaf in ACI.
- B. The next hop 10.1.168.95 for route 172.16.100.0/24 is the TEP address of a border leaf in ACI.
- C. 172.16.100.0/24 is a BD subnet in ACI.
- D. The next hop 10.0.1.14 for route 172.16.99.0/24 is the TEP address of a border leaf in ACI.
- E. 10.20.1.0./24 is a BD subnet in ACI.
正解：B、E
質問 # 198
Which two statements about the process at upgrading an EPLD on a Cisco MDS 9000 Series Switch are correct? (Choose two.)
- A. An upgrade verification identifies the impact of each EPLD upgrade.
- B. The EPLDs for all the modules on a switch must be upgraded at the same time.
- C. EPLDs can be upgraded without replacing the hardware.
- D. EPLDs can be upgraded only to the latest EPLD image.
- E. EPLD upgrades can be completed without powering down the module during the upgrade.
正解：A、C
解説：
Section: Compute
質問 # 199
AN engineer is asked to modify an overridden policy by changing the number of FCNS database entries to
1500 and then generable a massage. What configuration will accomplish this task?
A)
B)
C)
D)
- A. Option C
- B. Option A
- C. Option B
- D. Option D
正解：C
質問 # 200
Refer to the exhibit. An engineer is configuring a Cisco MDS 9000 Series Switch for the first time.
After the initial setup process, the name server at IP 192.168.10.11 is missing from the configuration. Which set of actions completes the configuration?
- A. Enter no at step 21 and reinitialize the installer. Press the Esc key to access ROMMON mode.
- B. Enter yes at step 21 to edit the configuration. Add the line dns-server 192.168.10.11.
- C. Enter no at step 21 and reload the switch. Configure the advanced IP options.
- D. Enter yes at step 21 and log in. Modify the startup configuration DNS
正解：C
質問 # 201
......
合格率取得する秘訣は350-601認定試験エンジンPDF：https://www.goshiken.com/Cisco/350-601-mondaishu.html
350-601試験問題集で合格できるには更新されたテスト問題集：https://drive.google.com/open?id=1JKh1q9--nG6CmgZHxhyHkqhj7yGggR8V