300-510練習試験と学習ガイドは厳密検証されたGoShiken最新な270問題
2025年最新のな厳密検証された合格させる300-510学習ガイドベズトお試しセット
Cisco 300-510の認定試験は、サービスプロバイダーネットワークの高度なルーティングソリューションに関する専門知識を習得したいネットワークエンジニアを対象としています。この試験は、ネットワークインフラストラクチャ、VPNサービス、BGP、ルートポリシーなど、Ciscoサービスプロバイダーの高度なルーティングソリューションの実装に関する様々なトピックをカバーしています。試験は、複雑なサービスプロバイダーのルーティングソリューションを設計、実装、トラブルシューティングする能力をテストするために用意されています。
質問 # 85
Refer to the exhibit.
Which tree does multicast traffic follow?
- A. shared tree
- B. source tree
- C. MDT voice
- D. MDT default
正解：D
質問 # 86
Refer to the exhibit. R3 is:
* failing to accept multicast RP information from Domain-A
* advertising MSDP SA messages to R1 and R4
* receiving SA messages only from R4
Which command must the engineer implement to resolve the issue?
- A. R3# no ip msdp peer 192.168.1.1
- B. R3# ip msdp sa-filter in 192.168.3.1
- C. R3# no ip msap sa-filter in 192.168.1.1
- D. R3# ip msdp sa-filter out 192.168.1.1
正解：B
解説：
https://allthingsnetworking.wordpress.com/2014/06/27/pim-msdp-sa-filter/
質問 # 87
Guidelines
This is a lab item in which tasks will be performed on virtual devices.
Refer to the Tasks tab to view the tasks for this lab item.
Refer to the Topology tab to access the device console(s) and perform the tasks.
Console access is available for all required devices by clicking the device icon or using the tab(s) above the console window.
All necessary preconfigurations have been applied.
Do not change the enable password or hostname for any device.
Save your configurations to NVRAM before moving to the next item.
Click Next at the bottom of the screen to submit this lab and move to the next question.
When Next is clicked, the lab doses and cannot be reopened.
Topology
Tasks
Configure and verify an OSPF neighbor adjacency between R1 and R2 in OSPF area 0 according to the topology to achieve these goals:
1. R1 pings the Loopback0 interface of R2. Use interface-level configuration to complete this task.
2. R2 pings the Loopback0 interface of R1. Use interface-level configuration to complete this task.
3. R2 receives a single summary route 172.16.100.0/22 for networks 172.16.100.0/24, 172.16.101.0/24, and 172.16.103.0/24.
正解：
解説：
質問 # 88
Refer to the exhibit.
Which effect of this configuration is true?
- A. It sets the hold timer to 30 seconds and the keepalive timer to 240 seconds
- B. It sets the hold timer to 30 milliseconds and the keepalive timer to 240 milliseconds
- C. It sets the keepalive timer to 30 milliseconds and the hold timer to 240 milliseconds
- D. It sets the keepalive timer to 30 seconds and the hold timer to 240 seconds.
正解：D
解説：
Reference:
html#wp1552800140
質問 # 89
Refer to the exhibit.
An engineer is troubleshooting connectivity issues on the MPLS core network. A customer connected through R4 cannot reach the OSPF domain on R5. While checking the routing table of R1, the engineer cannot see all the routes from R3 and R5. Which task must the engineer perform so that R4 is able to reach R5?
- A. Enable OSPF peering and configure route redistribution between routers R4 and R1.
- B. Enable OSPF on the Area-0 routers and configure MP-BGP between routers R1 and R3.
- C. Enable MP-BGP peering on routers R1. R3, R4, and R5.
- D. Enable route filtering between routers R1 and R3.
正解：A
質問 # 90
Refer to the exhibit.
A network engineer applied configuration on R5 to summarize all OSPF routes, but R4 is still receiving specific routes from R5. The engineer has confirmed that both R5 and R4 routers are configured with correct summarization configuration but R5 Is not sending the summary routes What action must the engineer take to fix the problem?
- A. Configure a sham link between R4 and R5 to support summarization within Area 2
- B. Remove summarization configuration on R5 and configure it on R4
- C. Move R4 and R5 in separate areas as now they maintain the same link-state database
- D. Clear link-state database on both R4 and R5 routers for summarization to work
正解：C
質問 # 91
Refer to the exhibit.
Which statement about this configuration is true?
- A. Router 1 receives only the best path from neighbor 192.168.1.1
- B. Router 1 sends and receives multiple best paths from neighbor 192.168.1.1
- C. Router 1 receives up to two paths from neighbor 192.168.1.1 for all routes in the same AS
- D. Router 1 sends up to two paths to neighbor 192.168.1.1 for all routes
正解：B
質問 # 92
After an engineer configures BGP in R1, it starts receiving this message
*Jun 29 13:30:50.122: %BGP-5-ADJCHANGE: neighbor 192.168.10.1 Down User reset Jun 29 13:30:52.341: %BGP-3-NOTIFICATION: sent to neighbor 192.168.10.1 2/6 (unacceptable hold time) 0 bytes Which action makes the peering come back up again?
- A. Make a soft reset to the peer.
- B. Set up a minimum hold-down timer higher.
- C. Set up a hello timer higher.
- D. Set up a hold-down timer higher.
正解：B
質問 # 93
Refer to the exhibit.
How are packets directed through the data plane when SRv6 is implemented?
- A. An ordered list of segments is encoded in a routing extension header
- B. The MPLS data plane is used to push labels onto IGP routes
- C. A stack of labels represents an ordered list of segments
- D. The packet is encapsulated with a header and trailer encoding the ordered list of segments
正解：A
質問 # 94
Refer to the exhibit.
An engineer is addressing an IS-IS design issue which is running within the topology. All links are running on FastEthernet, except the link between R5 and R4, which is Gigabit Ethernet. Which statement about the design is true?
- A. All links have equal cost if the default metric is used
- B. R4 prefer to reach R5 using R1 as the next hop
- C. R1 prefer to use R5 as the next hop to reach R4
- D. R5 prefers to use R4 as the next hop for all routes
正解：A
質問 # 95
Refer to the exhibit.
Refer to the exhibit An engineer is troubleshooting a networking issue with several symptoms The shortest path from router R1 to R8 is underused and the longest path is overused Traffic from 10.1.1 1 to 10 8 8 8 is routed on the longest path Traffic between the R1 and the application server is experiencing packet drops and latency problems.
Which action resolves the issue?
- A. Block the advertisement of the application server IP address to router R6.
- B. Configure route leaking for the IP address Of the application server on router RI.
- C. Configure a Level 2 IS-IS domain on router RI.
- D. Increase the RI to R2 link metric to 20.
正解：C
質問 # 96
Refer to the exhibit. Customer traffic from the branch site to the hub is experiencing packet drops.
The engineer verified that:
- Customer traffic from the hub is able to reach the branch site.
- The connection between PE1 and PE2 is working normally.
- Routers P1 and P2 are able to ping devices on the hub site.
Which action resolves the issue?
- A. Advertise the VPNv4 routes of the branch site in CE2.
- B. Redistribute the CE2 OSPF routes in the PE2 VRF.
- C. Advertise the VPNv4 routes of the hub in CE1.
- D. Redistribute the CE1 OSPF routes in the PE1 VRF.
正解：C
質問 # 97
Refer to the exhibit.
Refer to the exhibit. CE1 and CE2 use connectivity over the service provider cloud to reach CE3 In the event of a link failure in the service provider cloud which BGP feature relies on IGP convergence to quickly assist in the installation of a backup path?
- A. BGP confederations
- B. BGP route dampening
- C. BGP graceful restart
- D. BOP PIC core
正解：D
質問 # 98
Which two differences should be considered when deciding whether to implement to implement routing policies or route maps? (Choose two.)
- A. Sequences are added after implementing a route map, but routing policies must be reconfigured when change is needed.
- B. Route maps are supported in Cisco 10S Software and routing policies are supported in Cisco IOS XR Software.
- C. Route maps are implemented using hierarchical policies, but routing policies must be implemented sequentially.
- D. Route maps require an explicit deny at the end of the sequence, but routing policies have an implicit deny at the end of the program.
- E. Route policies require sequence numbers, but route maps are implemented without sequencing.
正解：A、B
質問 # 99
Refer to the exhibit.
Refer to the exhibit There is a BGP traffic path issue between Customer-1 and Customer-2 Users from Customer-2 have reported file transfer issues High utilization on the path between both customers causes many packet drops. Which configuration resolves the issue?
- A. Option B
- B. Option D
- C. Option A
- D. Option C
正解：A
質問 # 100 
Refer to the exhibit. An engineer is troubleshooting an issue with this network and notices that prefixes from R3 are missing on the R1 routing table Due to repeated ASN when the 10 0 0 0'8 prefix from R3 arrives at R1, BGP automatically rejects it There is no prefix-list on R1 which blocks the traffic from R3 What should the engineer do to fix the problem so that BGP allows that prefix on R1?
- A. Configure R2 as a route reflector client of R1.
- B. Configure identical confederation ASNs on R1 and R2.
- C. Configure the allowas-in command on R1.
- D. Configure the next-hop-self command on R2.
正解：C
質問 # 101
Refer to the exhibit.
Refer to the exhibit. An engineering team implemented IS-IS on the network, with several different areas. Recently, router R6 in area 3 has been experiencing excessive CPU usage. To reduce the load, a network engineer implemented route summarization on R2 However. R6 is still receiving the full routes from all routers. Which action must the engineer take to resolve the excessive CPU usage?
- A. Configure all routers as Level 1/2 routers so that route summarization functions throughout the network
- B. Configure routers R3 and R5 to send summary routes to R6.
- C. Configure router R1 to send only the default route to R2 and R4.
- D. Configure the Level 2 router R6 to manage summarization for the network
正解：B
質問 # 102
Refer to the exhibits. A network operator is troubleshooting packet loss seen from the R1 loopback interface to the R2 loopback interface over the core network. The operator is attempting to identify the next leg in the path from PE1.
Which interface and label path should the operator investigate next?
- A. PE1 - Gi0/0/0/2 - forwarding label 24002
- B. PE1 - Gi0/0/0/2 - forwarding label 24001
- C. PE1 - Gi0/0/0/3 - forwarding label 24002
- D. PE1 - Gi0/0/0/3 - forwarding label 24001
正解：D
質問 # 103
Refer to the exhibit.
A service provider is running IS-IS in the core, and all routers use the default IS-IS configuration and reside in the same area. All routers maintain a different 6 bytes for the system ID. but the attached bits in the NET are the same. After an engineer added router R6 to the network. R3 and R5 began to experience CPU processing issues. Which action must the engineer take to resolve the issue?
- A. Configure routers R5 and R3 to operate as Level 1 routers only so that they inject a default routing into the routing tables of the other routers
- B. Configure all routers to operate as IS-IS Level 2 routers so that only a Level 2 database is maintained.
- C. Configure all routers lo operate as IS-IS Level 1 routers by altering the attached bit to ensure that a default route is Injected Into the routing tables.
- D. Configure R6 to operate as a Level 1 router only so that it maintains the Level 1 database for all routers.
正解：B
質問 # 104
......
究極のガイドは300-510最新時間限定今すぐダウンロード！：https://www.goshiken.com/Cisco/300-510-mondaishu.html
2025年最新のな厳密検証された合格できる300-510試験にはリアル問題と解答：https://drive.google.com/open?id=1IWqxKQFHZfBKnsDqPT0EVkQOJIxv_a4Q