D-NWR-DY-23問題集には練習試験問題解答
D-NWR-DY-23はDell Data Protection実際の無料試験練習テスト
質問 # 51
What are the requirements to access the NMC UI?
- A. supported web browser and Java Runtime Environment
- B. Java Runtime Environment and Windows-based OS
- C. Linux-based OS and supported web browser
- D. Windows-based OS and a Microsoft Visual Studio runtime
正解:A
質問 # 52
Which is the main authentication server log file for troubleshooting and verification purposes?
- A. \nsr\authc-server\tomcat\logs\authc-server-audit.log
- B. \nsr\authc-server\tomcat\logs\authc-server.log
- C. \nsr\authc-server\logs\authc-cli.log
- D. \nsr\authc-server\tomcat\logs\commons-daemon.date.log
正解:B
質問 # 53
A system administrator wants to deploy a CloudBoost appliance to Microsoft Azure to extend on- premise data protection.
What are the recommended WAN requirements for the deployment?
- A. Minimum bandwidth of 100 Mb/s with a maximum latency of less than 100 ms RTT
- B. Minimum bandwidth of 10 Mb/s with a maximum latency of less than 100 ms RTT
- C. Minimum bandwidth of 500 Mb/s with a minimum latency of less than 10 ms RTT
- D. Minimum bandwidth of 100 Mb/s with a minimum latency of less than 1000 ms RTT
正解:A
質問 # 54
Which combination of simultaneous backups and recoveries is supported when using an advanced file type device in EMC NetWorker?
- A. Multiple backups and multiple recoveries
- B. Only one backup and one recovery
- C. Only one backup and multiple recoveries
- D. Multiple backups and only one recovery
正解:A
質問 # 55
An EMC NetWorker administrator has two Microsoft Exchange servers and one Microsoft SharePoint distributed farm. These applications reside on an EMC VNX disk array.
The backup administrator has two backup requirements:
1. Back up both Exchange and SharePoint servers by leveraging Microsoft VSS framework.
2. Minimize the performance impact on the client caused by the backup operation.
Which NetWorker module needs to be implemented?
- A. EMC NetWorker Module for Databases and Applications with EMC hardware provider
- B. EMC NetWorker Module for Microsoft with EMC hardware provider
- C. EMC NetWorker Module for Microsoft with Microsoft VSS provider
- D. EMC NetWorker Module for Databases and Applications with Microsoft VSS provider
正解:B
質問 # 56
An EMC NetWorker customer wants to clone save sets from an EMC Disk Library (EDL) to a physical tape library. The customer requires full catalog tracking with minimum SAN utilization.
Which solution best satisfies these requirements?
- A. Configure the backup server to perform the clone operation.
- B. Set up a second data zone with local devices dedicated to cloning.
- C. Use the autoarchive feature on the EDL.
- D. Configure the embedded storage node to handle the clone data flow.
正解:D
質問 # 57
An EMC NetWorker client has a file system with two files; A and B.
As the NetWorker administrator, you have created a backup schedule for this client consisting of the following:
- Full back up every Sunday
- Level 2 on Monday
- Level 3 on Wednesday
- Incremental on Thursday
- Level 2 on Friday
File B is changed on Monday, file C is created on Tuesday, file A is changed on Wednesday, and file D is created on Thursday.
Which files will be backed up on Friday?
- A. A, C, and D only
- B. A and D only
- C. A, B, C, and D
- D. D only
正解:C
質問 # 58
A backup administrator uses the EMC Networker Module for Microsoft Applications. The administrator wants faster recovery of data directly from snapshots on disk for their Microsoft Exchange implementation.
Which technology is used by NMM to perform backups and recovery?
- A. Volume Shadow Copy Service
- B. PowerSnap
- C. Snaplmage
- D. NDMP
正解:A
質問 # 59
What are valid backup levels in EMC Networker?
- A. Full, Incremental, Cumulative Incremental, and Level 0-9
- B. Full, Incremental, Cumulative Incremental, Logs only, and Synthetic Full
- C. Full, Incremental, Differential, Logs only, and Synthetic Full
- D. Full, Incremental, Differential, Level 0-9, and Synthetic Full
正解:B
質問 # 60
Which NetWorker resource determines the level of backup performed by the client or group?
- A. Pool
- B. Action
- C. Directive
- D. Policies
正解:B
質問 # 61
An Administrator found a corruption on Resource Files on an EMC NetWorker Server.
Which type of recovery should the administrator use?
- A. Disaster
- B. Direct
- C. Browsable
- D. Save Set
正解:A
質問 # 62
What configuration information is stored by the EMC NetWorker server?
- A. Clients, Devices, and Policies only
- B. Groups, Policies, Schedules, and Licensing
- C. Clients, Devices, Index, and Pools
- D. Groups, Policies, and Schedules only
正解:B
質問 # 63
A client save set is backed up to an EMC NetWorker backup pool and later cloned to a volume in a clone pool.
Which parameter determines when the volume in the clone pool is a candidate for recycling?
- A. Longest retention time of any incremental save set on the clone volume
- B. Longest retention time of any differential save set on the clone volume
- C. Longest retention time of any full save set on the clone volume
- D. Longest retention time of any save set on the clone volume
正解:D
質問 # 64
What is a characteristic of NMDA for MySQL backups?
- A. MySQL data and binary logs can be sent to separate backup pools during a single NMDA backup
- B. NMDA interacts with the MySQL Enterprise Backup software through the MySQL SBT interface
- C. NMDA cannot delete the binary logs from the disk after completing a binary log backup
- D. Scheduled and manual backups can be run using the NetWorker User for MySQL interface
正解:A
質問 # 65
If an incremental backup is performed for an EMC NetWorker client, at what level is its Client File Index (CFI) backed up?
- A. 0
- B. 1
- C. 2
- D. Full
正解:C
質問 # 66
In an EMC NetWorker storage node with four stand-alone LTO tape drives, which daemons must be running?
- A. Four nsrmmd and one nsrlcpd
- B. Four nsrlcpd only
- C. Four nsrmmd only
- D. One nsrmmd and four nsrlcpd
正解:C
質問 # 67
What is the correct sequence of events in a scheduled backup workflow using Dell EMC NetWorker Module for Databases and Applications (NMDA)?
正解:
解説:
質問 # 68
A Dell EMC Networker backup administrator wants to identify bottlenecks for a file server with poor backup performance. The administrator discovers that Client Direct is disabled for the file server.
What happens when Client Direct is enabled?
- A. Backup data is sent directly to the target device and metadata is sent to the storage node.
- B. Backup data is sent directly to the target device and metadata is sent to the NetWorker server.
- C. Back up data and metadata are sent to the storage node and then to the target device.
- D. Backup data is sent to the storage node and metadata is sent to the NetWorker server.
正解:A
質問 # 69
For the Hyper-V File Level Recovery feature, what does the message queue adapter communicate with?
- A. NetWorker Server and NetWorker Server components
- B. Authentication Server and Authentication Server components
- C. License Server and License Server components
- D. NMC Server and NMC Server components
正解:A
質問 # 70
An EMC NetWorker administrator configured a Microsoft Exchange client with the NetWorker Module for Microsoft (NMM).
In which attribute did the administrator specify the backup options?
- A. Save set
- B. Application information
- C. Backup command
- D. Schedule
正解:B
質問 # 71
An EMC NetWorker administrator wants to create a new custom notification. The notification needs to send an e-mail when a backup failure of a policy occurs.
Which attribute is configured to specify the alert severity that will trigger the notification?
- A. Action
- B. Alert
- C. Priority
- D. Event
正解:C
質問 # 72
When backing up Active Directory with NetWorker Module for Microsoft, which feature provides the ability to recover individual objects?
- A. GLR
- B. VSS
- C. Online backup
- D. Parallelism
正解:A
質問 # 73
Which EMC Net Worker process reads and manages the port range information?
- A. nsrd
- B. nsrexecd
- C. nsrstat
- D. nsrmmd
正解:B
質問 # 74
What is a consideration for a block based backup (BBB) installation and configuration?
- A. Client Direct should be disabled in the client configuration
- B. Only Data Domain backup target devices are supported
- C. Linux BBB package (lgtobbb) is required for full and incremental support
- D. Checkpoint restart and standard EMC NetWorker directives are not supported
正解:D
質問 # 75
A backup administrator has configured Data Domain Cloud Tier for long-term retention with ECS cloud. After setting up the data movement policy in NetWorker, the administrator discovers that the save set has not moved to their cloud even after cloning completed successfully.
What is a possible reason for this issue?
- A. Backup administrator does not have admin privileges on the Data Domain system
- B. Data movement policy has not yet run on the Data Domain system
- C. ECS does not support an app-based policy for cloning using NetWorker
- D. Data Domain does not have a replication license for managed-file replication
正解:B
質問 # 76
......
無料Dell Data Protection D-NWR-DY-23試験問題:https://www.goshiken.com/EMC/D-NWR-DY-23-mondaishu.html
D-NWR-DY-23問題集でDell Data Protection必ず合格できる練習問題集:https://drive.google.com/open?id=166cGR44iN3IJ2uy4pkDrwVRCVRSqjk2w