Fortinet FCSS_NST_SE-7.6試験問題集にはPDF問題とテストエンジンを試せ！ [Q39-Q63]

Fortinet FCSS_NST_SE-7.6試験問題集にはPDF問題とテストエンジンを試せ！

最新FCSS_NST_SE-7.6試験問題集には合格保証付きます

質問 # 39
Refer to the exhibit, which a network topology and a partial routing table.

FortiGate has already been configured with a firewall policy that allows all ICMP traffic to flow from port1 to port3.
Which changes must the administrator perform to ensure the server at 10.4.0.1/24 receives the echo reply from the laptop at 10.1.0.1/24?

A. A firewall policy that allows all ICMP traffic from port3 to port1.
B. Change the configuration from strict RPF check mode to feasible RPF check mode.
C. Enable asymmetric routing under config system settings.
D. Modify the default gateway on the laptop from 10.1.0.2 to 10.2.0.2.

正解：C

質問 # 40
Refer to the exhibit, which shows a session entry.

Which statement about this session is true?

A. Return traffic to the initiator is sent to 10.1.0.1.
B. Return traffic to the initiator is sent lo 10.200.1.254.
C. It is an ICMP session from 10.1.10.10 to 10.200.1.1.
D. It is an ICMP session from 10.1.10.1 to 10.200.5.1.

正解：D

質問 # 41
Refer to the exhibit, which shows the output of the command get router info ospf neighbor.

To what extent does FortiGate operate when looking at its OSPF neighbors? (Choose two.)

A. Neighbor 0.0.0.18 is the designated router (DR).
B. The local FortiGate is the DR.
C. The local FortiGate has at least one interface that participates in a point-to-point network.
D. The local FortiGate has at least one interface that participates in a broadcast network.

正解：C、D

解説：
The command on this slide shows a summary of the statuses of all the OSPF neighbors. For each neighbor, it displays the adjacency state and if it is a DR, a BDR, or neither (DROther) Pagina 362 Enterprise_Firewall_7.
2_Study. - Point-to-point networks contain only two peers, one at each end of a point-to-point link - Broadcast networks (multi-access) support more than two attached routers. They also support sending messages to multiple recipients (broadcasting). Pagina 365 Enterprise_Firewall_7.2_Study. In any multi-access network there is one DR and one BDR. Pagina 439 Network_Security_Support_Engineer_7.4_Study FULL/- This represents a point-to-point network

質問 # 42
Refer to the exhibit, which shows the partial output of a diagnose command.

Which two conclusions can you draw from the output shown in the exhibit? (Choose two.)

A. FortiGate will drop the expected traffic if it does not arrive within 23 seconds.
B. Clearing the master session has no impact on the expectation session.
C. This is a pinhole session to allow traffic for a TCP protocol that dynamically assigns TCP ports.
D. The session is checked against firewall policy ID 25.

正解：A、C

質問 # 43
Refer to the exhibit, which shows the output of a policy route table entry.

Which type of policy route does the output show?

A. A regular policy route, which is associated with an active static route in the FIB
B. An ISDB route
C. An SD-WAN rule
D. A regular policy route

正解：B

質問 # 44
Refer to the exhibits, which contain the partial configurations of two VPNs on FortiGate.

An administrator has configured two VPNs for two different user groups. Users who are in the Users-2 group are not able to connect to the VPN. After running a diagnostics command, the administrator discovers that FortiGate is not matching the user-2 VPN for members of the Users-2 group.
Which two changes must the administrator make to fix the issue? (Choose two.)

A. Use different pre-shared keys on both VPNs.
B. Set up specific peer IDs on both VPNs.
C. Change to aggressive mode on both VPNs.
D. Enable XAuth on both VPNs.

正解：B、C

質問 # 45
Refer to the exhibits.

An administrator Is expecting to receive advertised route 8.8.8.8/32 from FGT-A. On FGT-B, they confirm that the route is being advertised and received, however, the route is not being injected into the routing table.
What is the most likely cause of this issue?

A. FGT-B is configured with a prefix list denying the 8.8.8.8/32 network to be injected into the routing table.
B. The administrator has misconfigured redistribution of routes on FGT-A.
C. A batter route to the 8.8.8.8/32 network exists in the routing table.
D. FGT-8 is configured with a distribution list denying the 8.8.8.8/32 network to be injected into the routing table.

正解：A

質問 # 46
Refer to the exhibit, which shows a partial output of a real-time LDAP debug.

What two conclusions can you draw from the output? (Choose two.)

A. FortiOS performs a bind to the LDAP server using the user's credentials.
B. FortiOS collects the user group information.
C. FortiOS is performing the second step (Search Request) in the LDAP authentication process.
D. The user was found in the LDAP tree, whose root is TAC.ottawa.fortinet.com.

正解：C、D

質問 # 47
Refer to the exhibit.

Assuming a default configuration, which three statements are true? (Choose three.)

A. User C: Fail. There is no route to 10.0.4.63 using port1 in the touting table.
B. User B: Pass. FortiGate will use asymmetric routing using wan1 to reply to traffic for 95.56.234.24.
C. Strict RPF is enabled by default.
D. User A: Pass. The default static route through wan1 passes the RPF check regardless of the source IP address.
E. User B: Fail. There is no route to 95.56.234.24 using wan2 in the routing table.

正解：A、B、E

質問 # 48
In IKEv2, which exchange establishes the first CHILD_SA?

A. IKE_SA_INIT
B. CREATE_CHILD_SA
C. INFORMATIONAL
D. IKE_Auth

正解：B

質問 # 49
Which statement about IKEv2 is true?

A. Both IKEv1 and IKEv2 share the feature of asymmetric authentication.
B. IKEv1 and IKEv2 use same TCP port but run on different UDP ports.
C. IKEv1 and IKEv2 share the concept of phase1 and phase2.
D. IKEv1 and IKEv2 have enough of the header format in common that both versions can run over the same UDP port.

正解：D

質問 # 50
Refer to the exhibit, which shows the output of a debug command.

Which two statements about the output are true? (Choose two.)

A. In the network connected to port4, two OSPF routers are down.
B. One of the neighbors has a router ID of 0.0.0.4.
C. The interlace is part of the OSPF backbone area.
D. There are a total of five OSPF routers attached to the vorz4 network segment

正解：A、C

質問 # 51
What are two functions of automation stitches? (Choose two.)

A. You can create automation stitches to run diagnostic commands and attach the results to an email message when CPU or memory usage exceeds specified thresholds.
B. You can configure automation stitches to execute actions sequentially by taking parameters from previous actions as input for the current action.
C. You can set an automation stitch configured to execute actions in parallel to insert a specific delay between actions.
D. You can configure automation stitches on any FortiGate device in a Security Fabric environment.

正解：A、B

質問 # 52
Refer to the exhibit, which shows a truncated output of a real-time LDAP debug.

What two conclusions can you draw from the output? (Choose two.)

A. FortiOS is able to locate the user in step 3 (Bind Request) of the LDAP authentication process.
B. The user is authenticating using CN=John Smith.
C. The name of the configured LDAP server is Lab.
D. FortiOS is performing the second step (Search Request) in the LDAP authentication process.

正解：B、D

質問 # 53
Refer to the exhibit, which shows the port1 interface configuration on FortiGate and partial session information for ICMP traffic.

What happens to the session information if a routing change occurs that affects this session?

A. Only the interface and gateway information for dev=7 will be removed.
B. Sessions involving port7 or port19 will not have their routing information flushed.
C. The session information will not change unless the current route has been removed from the routing table.
D. The session will be flagged as dirty but no route lookups will be performed.

正解：C

質問 # 54
Refer to the exhibits.

An administrator is attempting to advertise the network configured on port3. However, FGT-A is not receiving the prefix.
Which two actions can the administrator take to fix this problem? (Choose two.)

A. Use the set network-import-check disable command.
B. Modify the prefix using the network command from 172.16.0.0/16 to 172.16.54.0/24.
C. Restart BGP using a soft reset to force both peers to exchange their complete BGP routing tables.
D. Manually add the BGP route on FGT-A.

正解：A、B

質問 # 55
Consider the scenario where the server name indication (SNI) does not match either the common name (CN) or any of the subject alternative names (SAN) in the server certificate.
Which action will FortiGate take when using the default settings for SSL certificate inspection?

A. FortiGate uses the first entry listed in the SAN field in the server certificate.
B. FortiGate uses the CN information from the Subject field in the server certificate.
C. FortiGate uses the SNI from the user's web browser.
D. FortiGate closes the connection because this represents an invalid SSL/TLS configuration.

正解：B

質問 # 56
What are two reasons you might see iprope_in_check() check failed, drop when using the debug flow?
(Choose two.)

A. Packet was dropped because of policy route misconfiguration.
B. Packet was dropped because of traffic shaping.
C. Trusted host list misconfiguration.
D. VIP or IP pool misconfiguration.

正解：C、D

質問 # 57
Exhibit.

Refer to the exhibit, which shows the output of diagnose automation test.
What can you observe from the output? (Choose two.)

A. The automation stitch test is not being logged.
B. The test was unsuccessful.
C. An HA failover occurred.
D. The automation stitch test failed but the HA failover was successful.

正解：A、B

質問 # 58
Exhibit.

Refer to the exhibit, which shows two entries that were generated in the FSSO collector agent logs.
What three conclusions can you draw from these log entries? {Choose three.)

A. DNS resolution is unable to resolve the workstation name.
B. A firewall is blocking traffic to port 139 and 445.
C. The user's status shows as "not verified" in the collector agent.
D. The FortiGate firmware version is not compatible with that of the collector agent.
E. Remote registry is not running on the workstation.

正解：B、C、E

質問 # 59
Refer to the exhibit, which shows the output of diagnose sys session list.

If the HA ID for the primary device is 0, what happens if the primary fails and the secondary becomes the primary?

A. Traffic for this session continues to be permitted on the new primary device after failover, without requiring the client to restart the session with the server.
B. The session state is preserved but the kernel will need to re-evaluate the session because NAT was applied.
C. The session will be removed from the session table of the secondary device because of the presence of allowed error packets, which will force the client to restart the session with the server.
D. The secondary device has this session synchronized; however, because application control is applied, the session is marked dirty and has to be re-evaluated after failover.

正解：A

質問 # 60
Which statement about parallel path processing is correct (PPP)?

A. PPP does not apply to packets that are part of an already established session.
B. Only FortiGate hardware configurations affect the path that a packet takes.
C. Software configuration has no impact on PPP.
D. PPP chooses from a group of parallel options lo identity the optimal path tor processing a packet.

正解：D

質問 # 61
Exhibit.

Refer to the exhibit, which contains partial output from an IKE real-time debug.
Which two statements about this debug output are correct? (Choose two.)

A. Perfect Forward Secrecy (PFS) is enabled in the configuration.
B. It shows a phase 2 negotiation.
C. The local gateway IP address is 10.0.0.1.
D. The initiator provided remote as its IPsec peer ID.

正解：B、D

質問 # 62
Refer to the exhibit.

Which three pieces of information does the diagnose sys top command provide? (Choose three.)

A. The diagnose sys top command has been running for 18 minutes.
B. The miglogd daemon would be on top of the list, if the administrator pressed m on the keyboard.
C. The cmdbsvr process is occupying 2.4% of the total user memory space.
D. If the neweli daemon continues to be in the R state, it will need to be manually restarted.
E. The miglogd daemon is running on CPU core ID 0.

正解：B、C、E

質問 # 63
......

信頼できるFortinet Certified Solution Specialist FCSS_NST_SE-7.6問題集PDFには2026年03月19日更新された問題です：https://www.goshiken.com/Fortinet/FCSS_NST_SE-7.6-mondaishu.html

必ず合格できるFortinet FCSS_NST_SE-7.6試験正確な68問題と解答あります：https://drive.google.com/open?id=15oFVJjXlj0v22xK6Wi_DdZpfxbqFoEB4

関するブログ

もっと

FCSS_NST_SE-7.6無料問題集