Network Appliance NS0-527リアルに2022年最新のブレーン問題集で模擬試験問題集
NS0-527試験問題 リアルなNS0-527練習問題集
質問 56
Which two NetApp tools would be used to set up protection relationships between a SolidFire cluster and an ONTAP cluster? (Choose two.)
- A. ONTAP CLI
- B. SolidFire Element Operating System UI
- C. OnCommand Insight
- D. SnapCenter
正解: A,B
質問 57
Click the Exhibit button.
Referring to the exhibit, which two statements are true? (Choosetwo.)
- A. A manual re-synchronization is needed.
- B. The source volume is unavailable for I/O
- C. The source volume is available for I/O.
- D. A manual re-synchronization is not needed.
正解: A,B
質問 58
Your customer wants to implement a solution to protect only a select number of NFSv3 volumes in aparticular aggregate that stores their mission-critical application data. The customer wants the volume's data replicated to secondary storage and have application write operations fail if they cannot be replicated. The customer needs to maintain a zero RPO and a very low RTO.
In this scenario, which solution satisfies these requirements?
- A. Mirrored aggregates using SyncMirror
- B. Mirrored SVMs using MetroCluster
- C. SnapMirror Synchronous using Sync mode
- D. SnapMirror Synchronous using StrictSync mode
正解: A
質問 59
You are asked to select a controller platform as a backup target with support for 40GbE, 32 Gbps FC, and the ability to attach three stacks of disk shelves.
Which tool would you use to find the information that you need?
- A. Hardware Universe
- B. Active IQ
- C. Interoperability Matrix Tool (IMT)
- D. OneCollect
正解: A
質問 60
Which attribute does Data ONTAP use the identify Snapshot copies between primary and secondary FlexVol volumes in a SnapVault relationship?
- A. Snapshot prefix
- B. SnapMirror policy
- C. FlexVol name
- D. SnapMirror label
正解: D
質問 61
A company is evaluating different data protection solutions. The company requires a solution that provides both local failover and storage tiering.
Which two solutions meet these requirements? (Choose two.)
- A. a FAS2650A system with HDD aggregates and FabricPool
- B. a FAS8200A NetApp Private Storage (NPS) system and Cloud Backup
- C. an AFF A300A with StorageGRID WebScale
- D. a FAS9000A system with SSD aggregates and FabricPool
正解: C,D
質問 62
Using SnapCenter 4.0, you are restoring a virtual machine.
Which additional tool would be used to monitor the restore?
- A. Virtual Storage Console
- B. OnCommand Unified Manager
- C. VMware vSphere Web client
- D. OnCommand System Manager
正解: C
質問 63
Click the Exhibit button.
Your customer has recently implemented a FabricPool solution that uses the default configuration. They notice that no data has moved to the cloud tier. Your customer is concerned that FabricPool might not be functioning properly.
Referring to the exhibit, what is causing the problem?
- A. The performance tier is not 75% full.
- B. The performance tier is not 100% full.
- C. The performance tier is not 50% full.
- D. The performance tier is not 90% full.
正解: C
質問 64
You are planning on archiving 200 TB of data with SnapVault to an ONTAP Cloud Instance.
Which NetApp tool manages your Bring Your Own License (BYOL)?
- A. OnCommand Unified Manager
- B. OnCommand Insight
- C. OnCommand Cloud Manager
- D. OnCommand System Manager
正解: C
質問 65
Using ONTAPSystem Manager, you are asked to replicate all the volumes contained in a Storage VM to a remote ONTAP 9.7 system for quick disaster recovery.
Which two steps need to be completed to accomplish this task? (Choose two.)
- A. Create a SnapMirror relationshipfor each volume.
- B. Create an SVM-DR relationship.
- C. Create a cluster peering relationship.
- D. Create an SVM peering relationship.
正解: C,D
質問 66
A previous administrator had configured an external backup system to use node-scoped NDMP for backups, but you want to change this system to use SVM-scoped NDMP.
How do you make this change in ONTAP?
- A. Restart the NDMP service on the cluster.
- B. Turn off node-scoped NDMP on the SVMs being backed up.
- C. Restart the NDMP service on the SVMs being backed up.
- D. Turn off node-scoped NDMP on the cluster.
正解: D
質問 67
You need to backup Exchange, MS SQL, and VMware virtual machines with application consistency.
Which tool accomplishes this task?
- A. OnCommand Unified Manager
- B. VMware vSphere Web client
- C. SnapCenter
- D. OnCommand System Manager
正解: C
質問 68
Click the Exhibit button.
A customer is interested in using SnapCenter tosupport Snapshot copies with their Oracle DB. They virtualized their environment but do not have any block protocols available.
In this solution, which protocol shown in the exhibit is supported?
- A. iSCSI
- B. FC
- C. SMB3
- D. NFS
正解: D
質問 69
A client has two regional offices that use SnapMirror cross-site replication to host disaster-recovery mirrors for both offices. A co-worker at one office is requesting read/write access to one of the volume mirrors. You must accomplish this task without interrupting data access or replication.
In this scenario. how should you proceed?
- A. Create a FlexClone volume based on one of the Snapshot copies at the destination so that it is writeable for the co-worker.
- B. Modify the export policy on the destination mirror volume so that it is now writeable for the co-worker.
- C. Create a FlexVol volume on the destination cluster so that it is writeable for the co-worker.
- D. Break the SnapMirror relationship between the local and remote clusters, and make the destination volume writeable for the co-worker.
正解: A
質問 70
In a clustered Data ONTAP environment, the customer is using SnapVault to back up data from aprimary to a secondary cluster.
Policies, Resource Pools, and Storage Efficiency are configured in OnCommand Unified Manager 6. OnCommand Workflow Automation takes care of the secondary provisioning. The customer wants to update the SnapMirror Policy witha custom Snapshot copy label.
What should be done to make sure that the Snapshot copies will be transferred to the secondary cluster?
- A. Add the SnapMirror label in the SnapMirror policy of the secondary system.
- B. Add the SnapMirror label in the efficiency policy of the secondary system.
- C. Re-initialize the SnapMirror relationship and transfer a new baseline.
- D. Re-initialize the SnapMirror relationship without transferring a new baseline.
正解: D
質問 71
You have recently installed and set up a new NetApp HCI deployment in your data center that consists of four compute nodes and four storage nodes. Inside this HCI deployment, you are using ONTAP Select for file services. You must protect the data inside the ONTAP Select VM in case of a rack failure.
Which two methods would accomplish this task? (Choose two.)
- A. Using SolidFire real-time remote replication, replicate the hosting volumes to an ONTAP cluster.
- B. Replicate the volumes using SnapMirror from inside the ONTAP Select VM to an existing ONTAP cluster.
- C. Replicate the SVMs from inside the ONTAP Select VM to an existing ONTAP cluster using SVM DR.
- D. Enable FabricPools in the ONTAP Select instance.
正解: A,C
質問 72
Click the Exhibit button.
Referring to the exhibit, what two Search Criteria check boxes need to be used to provide a supported solution for protecting Windows Server 2019 DCE 64-bit, x64 host using local NetApp LUNs with SnapCenter Server
4.1.1? (Choose two.)
- A. SnapCenter Host Plugin
- B. Browser
- C. SnapCenter Application Plugin
- D. Host OS (OS)
正解: A,D
質問 73
......
厳密検証されたNS0-527試験問題集と解答で無料提供のNS0-527問題と正解付き：https://www.goshiken.com/NetworkAppliance/NS0-527-mondaishu.html
あなたを合格させるNS0-527問題集無料で最新のNetwork Appliance練習テスト：https://drive.google.com/open?id=1exCj0TgYV8z96RMfjfC6Hi4vTpxNE6WH