ベスト良質なOracle 1z0-1075-24試験問題GoShikenリアル練習試験 [2025]
重要な試験問題でOracle Manufacturing Cloud 2024 Implementation Professional一発合格
Oracle 1z0-1075-24 認定試験の出題範囲：
| トピック | 出題範囲 |
|---|---|
| トピック 1 |
|
| トピック 2 |
|
| トピック 3 |
|
| トピック 4 |
|
| トピック 5 |
|
| トピック 6 |
|
質問 # 26
Which statement is NOT true about cumulative lead time?
- A. It calculates cumulative manufacturing lead times by rolling up manufacturing lead times of make Items.
- B. It updates lead time percent at the operation level in the work definition.
- C. It updates the item's lead time attributes at the end of the calculation process: cumulative manufacturing and cumulative total lead times.
- D. It calculates cumulative total lead times by rolling up lead times of make items and adding up lead time values of buy items.
正解：B
質問 # 27
You create a work order, in which some of the operations have components with the Push supply type. While reporting material consumption on the Report Material Transaction page, you want the Push components to default whenever the operator selects Show Components.
Which setup task must you perform in the Manage Plant Parameters section to achieve this?
- A. Set Default Transaction Mode to Entered and Default Transaction Quantity to Work Definition.
- B. Set Default Transaction Mode to Entered.
- C. Set Default Transaction Mode to AIL
- D. Set Default Transaction Mode to Work Definition.
正解：D
解説：
To ensure that Push components are automatically defaulted when reporting material consumption on the Report Material Transaction page, you must configure the system to use the Work Definition as the default source for transactions.
Setting Default Transaction Mode to Work Definition ensures that the system automatically pulls the component list and quantities as defined in the work order or work definition when operators perform material transactions. This setting streamlines the material consumption process for Push supply type components.
質問 # 28
You have been asked to set up cost estimates for 10 different purchased items. Which two tasks can you perform to achieve this?
- A. Import a spreadsheet.
- B. Use the Mass Edit functionality.
- C. Enter cost estimates directly into the UI.
- D. Run the "Update Item Cost Estimate" ESS process.
- E. Call a web service.
正解：A、C
解説：
To set up cost estimates for multiple purchased items in Oracle Manufacturing Cloud, the following tasks can be performed:
Import a spreadsheet (A): You can import cost estimates for multiple items at once using a preformatted spreadsheet, which allows for efficient data entry.
Enter cost estimates directly into the UI (E): Cost estimates can also be manually entered directly through the user interface for individual items, providing flexibility when fewer items need to be updated.
Incorrect options:
Calling a web service (B) is not the correct method for setting up cost estimates.
Mass Edit functionality (C) and Update Item Cost Estimate process (D) do not directly apply to entering new cost estimates for purchased items.
質問 # 29
Which three entities must you set up in Oracle Manufacturing Cloud to create a work definition for an item that will be manufactured in-house?
- A. Operations
- B. Production line
- C. Manufacturing lead time
- D. Resources
- E. Operation items
正解：A、D、E
解説：
To create a work definition for an in-house manufactured item in Oracle Manufacturing Cloud, the following entities must be set up:
Resources: Resources such as machines, labor, or tools are required to define what is needed to execute each operation.
Operations: These represent the steps in the manufacturing process. Each operation can have multiple resources and associated work instructions.
Operation Items: These are the items consumed or used during the operation. They include the components and materials needed for production.
While Production Line (C) and Manufacturing Lead Time (E) are important for scheduling and capacity planning, they are not mandatory for creating a basic work definition.
質問 # 30
Your customer needs to add additional information to their work order traveler. Which statement is NOT true about the Extensible Work Order Traveler?
- A. The production operator can invoke It from the Manage Work Orders, Review Dispatch ust. and Manage Supplier Operations pages.
- B. You can generate the Extensible Work Order Traveler report only from the Review Dispatch List and Manage Supplier Operations pages.
- C. Operators can invoke it by using the Generate Extensible Work Order Traveler Report task.
- D. You use Page Composer to display only the required actions.
- E. It is a critical document that travels with the physical material during production.
正解：B
解説：
The Extensible Work Order Traveler is a customizable report that contains detailed information about a work order and travels with the physical material during production. The statement that is not true is:
Statement A is incorrect because the Extensible Work Order Traveler report can be generated from multiple locations within Oracle Manufacturing Cloud, including the Manage Work Orders, Review Dispatch List, and Manage Supplier Operations pages. It is not limited to only the Review Dispatch List and Manage Supplier Operations pages.
Correct statements:
Statement B: The Extensible Work Order Traveler is a critical document used to communicate work order details during the production process.
Statement C: Production operators can invoke the traveler from several key pages like Manage Work Orders and Review Dispatch List.
Statement D: Operators can use the task "Generate Extensible Work Order Traveler Report" to invoke the report.
Statement E: You can use Page Composer to customize the Extensible Work Order Traveler and display only the required actions, allowing flexibility in what information is presented.
質問 # 31
Which three statements are true about executing rework work orders with manual control?
- A. You must manually issue the assembly item to rework a work order, either partial or full quantity.
- B. You can cancel the work order after releasing it and after performing any transactions.
- C. You cannot cancel the work order after releasing it or after performing any transactions.
- D. You can perform operation completion only after the assembly has been issued to the work order, and only up to the quantity that the assembly component item Is issued to the work order.
- E. If the group has grouping attributes, only work orders that match the grouping attribute values can be assigned to the groups.
正解：A、C、D
解説：
In Oracle Manufacturing Cloud, executing rework work orders with manual control requires certain steps and restrictions to ensure proper tracking of rework activities:
Statement A: You can perform operation completion only after the assembly item has been issued to the work order. The quantity that can be completed is limited to the quantity of the assembly issued.
Statement C: The assembly item must be manually issued to the work order, allowing for flexibility to issue either a partial or full quantity depending on the rework requirements.
Statement D: Once a work order is released and transactions have been performed, it cannot be canceled. This ensures that work orders already in progress are tracked properly.
Incorrect options:
Statement B: This is incorrect because you cannot cancel the work order after performing transactions.
Statement E: This statement is irrelevant in the context of executing rework work orders with manual control.
質問 # 32
Production operations need operators to execute the right steps to produce quality products, so want to use "View Document Items on a Dispatch List." Which statement is NOT true?
- A. You will always see the active revision of the attachment from currently effective revision of the document from Master Organization.
- B. You cannot view the document item attachment on the Manage Supplier Operations page.
- C. You can view the document item attachment in the dispatch list and on the Manage Supplier Operations page by using the attachment icon.
- D. You can add attachments to the document item and invoke the engineering change order to release the latest revision of the document item and attachment.
正解：A
解説：
When using the "View Document Items on a Dispatch List" functionality, production operators can view and access necessary document attachments to ensure correct steps in the manufacturing process. The statement that is not true is:
Statement B is incorrect because you do not always see the active revision of the attachment from the currently effective revision in the Master Organization. The revision displayed in the dispatch list may depend on the specific version that was assigned to the work order or operation at the time of creation, not necessarily the most current revision in the Master Organization.
Correct statements:
Statement A: Document attachments cannot be viewed on the Manage Supplier Operations page.
Statement C: Attachments can be added to document items, and updates can be managed through engineering change orders.
Statement D: Document item attachments are viewable both in the dispatch list and on the Manage Supplier Operations page via the attachment icon.
質問 # 33
Your client needs to implement operational checks for compliance with training and job requirements. Which four statements are true about this functionality?
- A. You have the ability to associate a Job profile with a Standard operation resource.
- B. You do not have the ability to associate a Job profile with a Work order operation resource.
- C. The qualification Is enforced during reporting of labor usage.
- D. You have the ability to associate a Job profile with a Work definition operation resource.
- E. The qualification Is used to warn a production supervisor If they assign operators that don't meet the skill requirements against the resource.
- F. A qualified operator need not be specified to report resource transactions.
正解：A、C、D、E
解説：
Oracle Manufacturing Cloud provides functionality to enforce compliance with training and job requirements through operational checks. The correct statements are:
Statement B: You can associate a job profile with a work definition operation resource. This ensures that only operators who meet the job requirements are allowed to perform the work.
Statement C: Qualifications are enforced when reporting labor usage, meaning that if an operator lacks the required qualifications, the system can prevent or warn about the labor transaction.
Statement D: You can also associate a job profile with a standard operation resource to enforce skills and training compliance.
Statement F: If an unqualified operator is assigned to a task, the system can notify the production supervisor to avoid non-compliance with skill requirements.
Incorrect options:
Statement A: A qualified operator must be specified to report resource transactions.
Statement E: You can associate a job profile with a work order operation resource, contrary to what is implied.
質問 # 34
During a Manufacturing Cloud implementation, a Production Supervisor wants to close the work orders for the previous month and make sure that they include the correct cost.
What must they do to achieve this?
- A. Update work order costs at any time; they can be updated regardless of the status of the work order
- B. Make sure that all costs are Included while closing last month's work orders; however, variances can be Included after closing the work orders.
- C. Exclude cost variances while closing last month's work orders because those can be applied directly In Subledger Accounting.
- D. Include all costs and variances in last month's work orders and close them; however, the work orders where updates are expected must not be closed.
正解：D
解説：
To ensure that work orders for the previous month are closed with the correct costs, the Production Supervisor must:
Include all costs and variances in the work orders before closing them. This ensures that the work orders reflect the true cost of production, including any deviations from the expected costs. However, if there are work orders that are still in progress or expected to receive updates (such as material or labor transactions), those work orders should not be closed until all costs are finalized.
Incorrect options:
A: Excluding cost variances would result in inaccurate costing.
B: All costs, including variances, must be included before closing.
D: Costs cannot be updated after the work order is closed, so all updates must occur before closing the work order.
質問 # 35
Which statement is NOT true about the Reservations tab?
- A. Manual reservations can be done for a work order in inventory.
- B. Demand details displayed are: Document Type (such as Sales Order), Customer Number and Name, Document Number, Due Date, and Quantity.
- C. You can view the reservation details of a work order as a source of demand, and a sales order as supply.
- D. A work order can be reserved against one or more sales orders.
- E. Reservations are generally created when a Back-to-Back sales order or a Configured Items sales order Is reserved for the work order.
正解：C
解説：
In Oracle Manufacturing Cloud, the Reservations tab provides detailed information on reservations linked to work orders and sales orders. The following explains why statement E is not true:
Statement E is incorrect: A work order is typically viewed as a source of supply, not demand. Sales orders generate demand, while work orders are created to supply the required products. Therefore, reservation details will show the work order as a source of supply and the sales order as the source of demand.
Correct statements:
Statement A: Demand details such as document type (e.g., Sales Order), customer number, document number, due date, and quantity are displayed.
Statement B: Reservations are often created for Back-to-Back or Configured Items sales orders to ensure the necessary products are reserved in the system for production.
Statement C: A work order can be reserved against one or more sales orders, especially in cases of configurable or customized items.
Statement D: Manual reservations for a work order can be made directly in inventory to allocate the necessary materials for production.
質問 # 36
A Production Supervisor queries a work order, WO-1025, from the Manage Work Orders page. On the Entering Edit Work Order: WO-1025 page, the supervisor finds a General Information, Operations, and History tab, but no Reservations tab.
What are two reasons for the Reservations tab not being displayed for WO-1025?
- A. It is not a Pick-to-Order work order.
- B. It is not a Back-to-Back work order.
- C. It Is not a Drop-Ship work order.
- D. It is not a Plan-to-Produce work order.
- E. It is not a Configured Item work order.
正解：B、E
解説：
In Oracle Manufacturing Cloud, the Reservations tab on the Edit Work Order page is displayed only for specific types of work orders that require reservations of components or materials. The absence of the Reservations tab in work order WO-1025 indicates that the work order is not one of the following types:
Configured Item Work Order (A): Configured items are typically built based on specific customer requirements, and reservations of components are often necessary. Since WO-1025 is not a configured item work order, the Reservations tab is not shown.
Back-to-Back Work Order (E): Back-to-back work orders are linked to sales orders and require reservations of materials to fulfill the specific demand. Since WO-1025 is not a back-to-back work order, the tab is not displayed.
Incorrect options:
B, C, D: Drop-Ship, Pick-to-Order, and Plan-to-Produce work orders do not typically require reservations in the same way as configured or back-to-back orders, which is why they are not the reasons for the absence of the Reservations tab.
質問 # 37
To help ensure compliance with the US Code of Federal Regulations (21 CFR Part 11), your client wants to enable audit trail for manufacturing work definitions and standard operations.
Which is NOT included in the audit trail for standard operations such as creation, update, and deletion?
- A. Work definition header and version attributes
- B. Operation resources. Including alternate resources
- C. Attachments at any level
- D. Descriptive flexfields (OFFs) at any level
- E. Item structure component attributes referenced from Product Information Management(PIM)
正解：E
質問 # 38
In a manufacturing plant, two purchase components, PI and P2, and a resource, Rl, are required to assemble a product. The cost of the assembly is calculated by using the standard costing method. The work definition and resource rates for the assembly have been defined as Required.
A Cost Accountant is estimating cost of the assembly, and analyzing rolled-up costs before finally publishing estimates as frozen standards to Cost Accounting by using a Cost Planning Scenario. While reviewing rolled-up costs, the extended costs of purchase components are not included in a rolled-up scenario.
What is the reason for this?
- A. Create Accounting Distributions was not initiated.
- B. Costs for purchase components PI and P2 are not defined In Cost Accounting.
- C. Create Accounting was not initiated.
- D. Purchase components PI and P2 are not associated with the material cost plan of the Cost Planning Scenario.
正解：D
解説：
In Oracle Manufacturing Cloud, when performing a cost analysis using Cost Planning Scenarios, all components and resources involved in the assembly must be associated with the material cost plan to be included in the rolled-up cost estimates. The reason the extended costs of purchase components (P1 and P2) are not included in the rolled-up scenario is that:
Purchase components PI and P2 are not associated with the material cost plan of the Cost Planning Scenario. This means that although the components are defined in the system, they haven't been linked to the cost planning scenario, so their costs are not included in the rolled-up calculations.
Incorrect options:
Costs for purchase components PI and P2 are not defined in Cost Accounting (A): While defining costs is necessary, the issue here is the components not being associated with the cost plan.
Create Accounting (C) and Create Accounting Distributions (D) are not relevant to the rolled-up scenario in this context, as they relate to the accounting process, not cost planning.
質問 # 39
A Production Operator needs to review the materials issued, resources charged, and operations performed for a job that was executed in the previous shift.
Which task should the operator select to review all the transactions in a single place for both work order and orderless execution?
- A. Manage Work Orders
- B. Review Production Transaction History
- C. Report Resource, Material, and Operation Transactions
- D. Review Dispatch List
正解：B
解説：
To review all the transactions associated with a job, including materials issued, resources charged, and operations performed, the Production Operator should select Review Production Transaction History. This task provides a comprehensive overview of all transaction types, whether for work order or orderless execution, in a single place.
Review Production Transaction History offers a detailed record of all activities performed during a work order or orderless transaction, making it easy for operators to audit and review the work executed in previous shifts.
Incorrect options:
Report Resource, Material, and Operation Transactions (A) is used for recording transactions, not for reviewing historical data.
Manage Work Orders (B) and Review Dispatch List (D) provide more general management and operational details, but not the comprehensive transactional history.
質問 # 40
Which statement is NOT true about using a Quick Complete action for an operation transaction?
- A. You can use it to transact only one serial number at a time.
- B. You can use it to collect Inspection results.
- C. You can use it for simultaneous reporting of one or more transactions.
- D. It is used on serial tracked operations and non-serial tracked operations with or without inspections.
- E. You can use It to transact one or more serial numbers.
正解：A
解説：
The Quick Complete action allows for fast, simplified transaction processing for work orders and operations. The statement that is not true is:
Statement E is incorrect because Quick Complete can be used to transact multiple serial numbers at a time, not just one. This feature is designed to handle both serial-tracked and non-serial-tracked operations efficiently.
Correct statements:
Statement A: Quick Complete supports simultaneous reporting of multiple transactions, allowing for streamlined processing.
Statement B: It can be used for both serial-tracked and non-serial-tracked operations, whether or not inspections are involved.
Statement C: Multiple serial numbers can be transacted at once using this feature.
Statement D: While Quick Complete can handle inspection-related transactions, it is not specifically for collecting inspection results.
質問 # 41
Your customer runs production 24 x 7 x 365 and wants to track Overall Equipment Effectiveness (OEE) online.
Which key setup can they use to achieve this?
- A. Enable IoT Asset Monitoring and turn on "Enable synchronization to IoT Asset Monitoring" In Plant Parameters.
- B. Enable IoT Fleet Monitoring and enable synchronization to IoT Production Monitoring in Plant Parameters.
- C. Enable IoT Production Monitoring and turn on "Enable synchronization to IoT Production Monitoring" In Inventory Organization.
- D. Enable IoT Production Monitoring and turn on "Enable synchronization to IoT Production
- E. Enable IoT Asset Monitoring and turn on "Enable synchronization to IoT Asset Monitoring" in Resources.
正解：C
解説：
To track Overall Equipment Effectiveness (OEE) in real-time, Oracle Manufacturing Cloud can integrate with IoT solutions. The correct setup involves:
Enabling IoT Production Monitoring and turning on synchronization to IoT Production Monitoring in the Inventory Organization. This allows real-time data from the shop floor to be captured, processed, and used to monitor equipment effectiveness, performance, and availability.
Incorrect options:
IoT Fleet Monitoring (A) and IoT Asset Monitoring (B, D) focus on tracking assets and fleets, which are more relevant for logistics or asset management, not production monitoring for OEE.
質問 # 42
Which option represents all the production exception types that can be reported by a Production Operator in Oracle Manufacturing Cloud?
- A. Work Area, Work Center, Resources, and Components
- B. Work Area, Work Center, and Resources
- C. Resources and Components
- D. Work Center and Resources
- E. Work Area. Work Center. Resources, Components, and Miscellaneous
正解：A
解説：
In Oracle Manufacturing Cloud, production operators can report several types of production exceptions that affect the flow of the production process. The complete list of production exception types that can be reported includes:
Work Area: Issues related to the broader production environment.
Work Center: Problems or exceptions that arise at specific work centers.
Resources: Issues with labor, machines, or tools that are part of the production process.
Components: Exceptions related to materials or components used in manufacturing.
Incorrect options:
Options A, B, C, D are incomplete and miss one or more of the exception types available in Oracle Manufacturing Cloud.
質問 # 43
An employee is responsible for dealing with different manufacturing practices and processes, machines, tools, and equipment that turn raw material into a product.
Which seeded job role must you assign to this employee?
- A. Production Engineer
- B. Manufacturing Engineer
- C. Manufacturing Supervisor
- D. Production Supervisor
- E. Production Operator
正解：B
解説：
In Oracle Manufacturing Cloud, the Manufacturing Engineer role is responsible for dealing with various manufacturing practices, processes, machines, tools, and equipment that transform raw materials into finished products. This role focuses on defining and managing production processes, resources, and operations in manufacturing plants.
Manufacturing Engineer: This role involves creating and maintaining manufacturing processes, production resources, and work instructions. It ensures that products are manufactured efficiently and in compliance with quality standards.
質問 # 44
Which statement is NOT true about cumulative lead time?
- A. It calculates cumulative manufacturing lead times by rolling up manufacturing lead times of make Items.
- B. It updates lead time percent at the operation level in the work definition.
- C. It updates the item's lead time attributes at the end of the calculation process: cumulative manufacturing and cumulative total lead times.
- D. It calculates cumulative total lead times by rolling up lead times of make items and adding up lead time values of buy items.
正解：B
解説：
Cumulative lead time is a key concept in Oracle Manufacturing Cloud, where it calculates the total time required to manufacture an item. The following points clarify the calculations:
Statement D is incorrect because cumulative lead time does not update the lead time percent at the operation level in the work definition. Instead, cumulative lead time focuses on rolling up the lead times of both make and buy items to provide an overall lead time for the entire production process.
Correct Statements:
Statement A: The system calculates cumulative manufacturing lead time by summing up the lead times of all make items in the production process.
Statement B: At the end of the cumulative lead time calculation process, it updates the lead time attributes of the item, specifically cumulative manufacturing and cumulative total lead times.
Statement C: Cumulative total lead time includes both make and buy item lead times, representing the complete production cycle from procurement to manufacturing.
質問 # 45
Your client has asked you to implement the functionality to ensure that the system checks for Qualified Operators when reporting labor usage.
Which statement is NOT true?
- A. Quick Complete is allowed for operations that contain resources with associated job profiles.
- B. Validation of operator qualification is also enforced when reporting operation is completed through the dispatch list.
- C. Qualified labor must be reported at the resource train stop.
- D. You will need to report a qualified operator to manually report resource transactions, if the resource has a job profile associated with It.
正解：A
解説：
When implementing the functionality for checking Qualified Operators during labor usage reporting in Oracle Manufacturing Cloud, it is important to enforce validation for operator qualifications. The following explains why statement C is not true:
Quick Complete is not allowed for operations that have resources with associated job profiles. This is because operations with specific job profile requirements must go through a more detailed validation process to ensure that the assigned operator has the necessary qualifications before the operation can be completed. Quick Complete bypasses detailed validations, making it unsuitable for operations with strict qualification checks.
Correct statements:
Statement A: Operator qualification is enforced when reporting operation completion through the dispatch list to ensure compliance.
Statement B: A qualified operator is required to manually report resource transactions when the resource has an associated job profile.
Statement D: Labor for qualified operators must be reported at the resource train stop to ensure the resource's qualifications are properly validated before continuing with the operation.
質問 # 46
......
1z0-1075-24試験問題集合格保証：https://www.goshiken.com/Oracle/1z0-1075-24-mondaishu.html
ベスト良質なOracle 1z0-1075-24試験問題：https://drive.google.com/open?id=1hVGr4ew0lY4i1MKh2Ek-Mg0sRSLM6y4g