SAP C-S43-2023認定試験問題集には82練習テスト問題があります
最新C-S43-2023試験問題集には高得点で一発合格
SAP C-S43-2023 認定試験の出題範囲：
| トピック | 出題範囲 |
|---|---|
| トピック 1 |
|
| トピック 2 |
|
| トピック 3 |
|
| トピック 4 |
|
| トピック 5 |
|
質問 # 35
What is characteristic for a maintenance order with status REL - if you also consider the capabilities of business functions? Note: There are 3 correct answers to this question.
- A. The planner can change planned costs at the operation level.
- B. The planner can change estimated costs only at the header level.
- C. The assignment of the notification to the maintenance order header cannot be deleted.
- D. The controller can determine actual cost surcharges.
- E. Goods receipts for external services can be entered.
正解：A、D、E
解説：
Maintenance Processing - Basic Functions
質問 # 36
You want to set up a general maintenance task list for inspection rounds using the overall time confirmation as a simplified way to record measurement documents. What do you need to do? Note: There are 2 correct answers to this question
- A. Assign a piece of equipment with an allocated measuring point to a task list operation
- B. Assign an inspection lot to the task list header
- C. Assign an inspection document as a PRT to the task list operation.
- D. Assign a measuring point as a production resources/tools (PRT) to a task list operation.
正解：A、D
解説：
To set up a general maintenance task list for inspection rounds using the overall time confirmation as a simplified way to record measurement documents, you need to do the following steps:
* Assign a piece of equipment with an allocated measuring point to a task list operation. This will allow you to inspect the equipment and record the measurement readings for the measuring point during the inspection round. You can assign the equipment either manually or automatically using the object list in the task list header1.
* Assign a measuring point as a production resources/tools (PRT) to a task list operation. This will allow you to inspect the measuring point and record the measurement readings for it during the inspection round. You can assign the measuring point either manually or automatically using the PRT category
0010 (Measuring Point) in the task list operation1.
* You do not need to assign an inspection lot to the task list header, as this is not required for inspection rounds. Inspection lots are used for quality inspections that are triggered by events such as goods receipt, production order, or sales order2.
* You do not need to assign an inspection document as a PRT to the task list operation, as this is not supported for inspection rounds. Inspection documents are used for quality inspections that are based on inspection plans and inspection characteristics2. References: PM - General maintenance task list and Set up your SAP S/4HANA system for EAM Inspection Checklists in SAP Help Portal.
質問 # 37
Which activities can the technician perform with the Report and Repair Malfunction SAPUI5 app?
Note: There are 2 correct answers to this question.
- A. Release
* Print - B. Schedule
* Dispatch - C. Complete
* Close Report - D. Release
* Start Work
正解：C、D
解説：
Maintenance Processing - Basic Functions
質問 # 38
How can you assign a material BOM to a piece of equipment?
- A. Via field model number in the equipment master
- B. Via field construction type
- C. Via material BOM header in the serialization data
- D. Via creation of an equipment BOM
正解：B
解説：
Topic: 2
User Interface and Mobile Maintenance
質問 # 39
What are the prerequisites for serializing a piece of equipment? Note: There are 3 correct answers to this question
- A. Assign a serial number profile to an additional business view for equipment category
- B. Add a serialized material to the equipment serial data view.
- C. Assign a serial number profile to the related material master.
- D. Assign a serial number profile to the equipment category
- E. Maintain a serial number for an existing equipment master.
正解：C、D、E
解説：
Serializing a piece of equipment means assigning a unique serial number to identify and track the equipment throughout its lifecycle. The prerequisites for serializing a piece of equipment are:
* Assign a serial number profile to the equipment category. This defines the rules for creating and managing serial numbers for the equipment, such as the number range, the check digit, and the serial number usage. The serial number profile is assigned in the Customizing activity Define Equipment Categories under Plant Maintenance and Customer Service -> Master Data in Plant Maintenance and Customer Service -> Technical Objects -> Equipment -> Equipment Categories.
* Assign a serial number profile to the related material master. This ensures that the material and the equipment have the same serial number profile and that the serial number is automatically copied from the material to the equipment. The serial number profile is assigned in the material master data in the Plant Data/Stor. 1 view under Serial Number Profile.
* Maintain a serial number for an existing equipment master. This can be done either manually or automatically. Manually, you can enter the serial number in the equipment master data in the Serial Data view under Serial Number. Automatically, you can link the equipment with a serialized material and the serial number will be copied from the material to the equipment. This linking can be done either with a goods movement or manually.
The options that are not prerequisites for serializing a piece of equipment are:
* Add a serialized material to the equipment serial data view. This is not a prerequisite, but rather a possible way to link the equipment with a serialized material and copy the serial number from the material to the equipment. However, this can only be done if the serial number profile is already assigned to both the equipment category and the material master.
* Assign a serial number profile to an additional business view for equipment category. This is not a valid option, as the serial number profile is assigned to the equipment category itself, not to any additional business view.
References:
* Serial Number Management
* Explaining Refurbishment of Spare Parts
質問 # 40
Which of the following objects can you directly assign when you define the work center? Note: There are 2 correct answers to this question.
- A. Calculation key
- B. Planner group
- C. Organizational unit (HR)
- D. Capacity category
正解：C、D
質問 # 41
Which activities can the planner perform by using the Maintenance Planning Overview app with the default filters? Note: There are 3 correct answers to this question?
- A. Analyze maintenance orders that are still in planning and have NOT been released.
- B. Display approved purchase requisitions for which purchase orders have been generated.
- C. Analyze confirmed maintenance orders that have NOT been settled.
- D. Analyze overdue maintenance orders that have NOT been finally confirmed
- E. Display approved purchase requisitions for which NO purchase orders have been generated
正解：A、D、E
解説：
The Maintenance Planning Overview app allows the planner to analyze critical factors in a chosen reference period, such as outstanding notifications, maintenance orders, purchase requisitions, and purchase orders. The app displays the data in multiple cards that show the number of objects and their status. The planner can use the default filters or adapt them according to their needs.
The activities that the planner can perform by using the app with the default filters are:
* Display approved purchase requisitions for which NO purchase orders have been generated. This is shown in the card "Purchase Requisitions Not Released" which displays the number of purchase requisitions that have been approved but not converted into purchase orders. The planner can navigate to the list of purchase requisitions and take further actions, such as creating purchase orders or changing the requirement date.
* Analyze overdue maintenance orders that have NOT been finally confirmed. This is shown in the card
"Overdue Orders" which displays the number of maintenance orders that have been released but not completed within the planned end date. The planner can navigate to the list of overdue orders and check the status of the operations, confirmations, and goods movements.
* Analyze maintenance orders that are still in planning and have NOT been released. This is shown in the card "Orders in Planning" which displays the number of maintenance orders that have not been released for execution. The planner can navigate to the list of orders in planning and complete the planning activities, such as assigning task lists, materials, and resources.
The activities that the planner cannot perform by using the app with the default filters are:
* Display approved purchase requisitions for which purchase orders have been generated. This is not shown in any of the cards in the app. The planner can use the app "Manage Purchase Requisitions" to display this information.
* Analyze confirmed maintenance orders that have NOT been settled. This is not shown in any of the cards in the app. The planner can use the app "Maintenance Order Costs Analysis" to display this information.
References:
* SAP S/4HANA : New app in Plant Maintenance (Asset Management) - Maintenance Planning Overview
* Highlights for Asset Management in SAP S/4HANA 2021
* Maintenance Management | SAP Help Portal
質問 # 42
Which of the following are components of cloud-based SAP Intelligent Asset Management? Note: There are 2 correct answers to this question
- A. SAP Asset Performance Management
- B. SAP Work Manager
- C. SAP Service and Asset Manager (formerly SAP Asset Manager)
- D. Worker Safety applications
正解：A、C
解説：
SAP Intelligent Asset Management is a cloud-based solution that comprises of five components1:
* SAP Asset Intelligence Network: A central repository for asset information that facilitates collaborative asset management and leverages the Internet of Things (IoT).
* SAP Predictive Maintenance and Service: A tool that combines sensor and business data, machine learning, and engineering simulations to optimize asset performance and reduce downtimes.
* SAP Asset Strategy and Performance Management: A tool that measures and improves asset performance and enhances maintenance strategies.
* SAP Predictive Engineering Insights: A tool that uses digital twin technologies and finiteelement analysis to monitor asset health and predict failures.
* SAP Service and Asset Manager (formerly SAP Asset Manager): A mobile app that provides online and offline access to asset management processes and data.
Among the given options, only B and D are components of SAP Intelligent Asset Management. A and C are not part of the cloud-based solution, but rather standalone applications that can be integrated with SAP S
/4HANA Asset Management or other SAP solutions. References: 1: This Article Introduces SAP Intelligent Asset Management
質問 # 43
Which settings must be customized to set up Inspection Checklist processing? Note: There are 2 correct answers to this question.
- A. Maintain settings at plant level for usage decisions.
- B. Assign an Inspection Type to a Maintenance Order Type and a Planning Plant.
- C. Assign an Inspection Type to a Maintenance Order Type.
- D. Create a control key which expects inspection characteristic assignments.
正解：A、C
解説：
Maintenance Processing - Advanced Functions
質問 # 44
Which of these are necessary steps of the Inspection Checklist process? Note: There are 2 correct answers to this question.
- A. Generate Inspection Lots within the checklists view.
- B. Link PM task list with assigned inspection point type to a maintenance item.
- C. Record the usage decision for an Inspection Lot.
- D. Generate Inspection Lots assigned to maintenance order headers.
正解：A、C
解説：
Maintenance Processing - Advanced Functions
質問 # 45
The planner adds stock materials in the maintenance order. What are possible options for handling of reservations within a maintenance order? Note: There are 2 correct answers to this question
- A. For the combination of order type and planner group, you can decide when reservations are created
- B. Open reservations can be cleared when a maintenance order operation is finally confirmed.
- C. Reservations are created only after a material availability check has been performed
- D. All open reservations are closed when the maintenance order is set to TECO.
正解：B、D
質問 # 46
You are analyzing the data transfer of the cost center of a piece of equipment. What are the possible data origins? Note: There are 2 correct answers to this question
- A. The individual maintenance of the cost center in the equipment master record
- B. The cost center of the superior equipment
- C. The reference functional location of the superior functional location
- D. The cost center of the related maintenance work center
正解：A、B
質問 # 47
To which objects can a personnel number be directly assigned?
Note: There are 2 correct answers to this question.
- A. Maintenance plan
- B. Business partner
- C. Planner group
- D. Work center
正解：B、D
解説：
Organizational Units and Master Data
質問 # 48
How do you set up the visible tiles for a specific user in SAP Fiori Launchpad? Note: There are 2 correct answers to this question
- A. By assigning a PFCG role with an SAP Fiori catalog
- B. By assigning a portal role with an SAP Fiori catalog
- C. By assigning a PFCG role with an SAP Fiori tile group
- D. By assigning the tiles directly
正解：A、C
解説：
The visible tiles for a specific user in SAP Fiori Launchpad are determined by the PFCG roles that are assigned to the user. The PFCG roles contain the SAP Fiori catalogs and tile groups that define the available and visible tiles for the user.
The steps to set up the visible tiles for a specific user are:
* Create or use an existing PFCG role in the backend system that contains the SAP Fiori catalogs and tile groups that are relevant for the user. The catalogs and tile groups can be created or copied from the SAP Fiori Launchpad Designer app. The catalogs contain the tiles and target mappings that represent the apps that can be launched from the launchpad. The tile groups are collections of tiles that are displayed on the launchpad home page.
* Assign the PFCG role to the user in the backend system. The user can have multiple PFCG roles assigned, depending on their business needs and authorizations.
* Log on to the SAP Fiori Launchpad with the user credentials. The user will see the tiles that are assigned to them through the PFCG roles on the launchpad home page. The user can also personalize the launchpad by adding, removing, or rearranging the tiles and groups.
The other options are incorrect because:
* Portal roles are not used to assign SAP Fiori catalogs and tile groups. Portal roles are used to assign portal content, such as iViews and pages, to users in the SAP Enterprise Portal.
* Assigning the tiles directly to the user is not possible. The tiles are part of the catalogs and tile groups that are assigned to the user through the PFCG roles.
References:
* Setting Up Launchpad Content | SAP Help Portal
* Creating and Configuring Tiles | SAP Help Portal
* SAP Fiori Launchpad Tiles Setup - Go Coding
* How to create Fiori Catalog, Group and custom Fiori tiles
質問 # 49
Which functions characterize a Strategic analysis as opposed to Embedded analysis within the SAP S/4HANA core system?
Note: There are 2 correct answers to this question.
- A. SAP BusinessObjects as a part of SAP Business Warehouse (BW)
- B. SAP BusinessObjects Business Intelligence for Visualization
- C. Preconfigured Core Data Service (CDS) containing SQL views
- D. A collection of tools that are not included with core SAP S/4HANA
正解：A、C
解説：
Maintenance Processing - Basic Functions
質問 # 50
Which requirements have to be fulfilled so that an Inspection Checklist with Inspection Lots is generated?
Note: There are 2 correct answers to this question.
- A. An Inspection Plan and a technical object must be assigned to the same class.
- B. An object list must have been generated manually or automatically.
- C. A checklist type must be assigned to the maintenance order header.
- D. A PM task list with inspection point type must be assigned to the maintenance order
正解：A、B
解説：
* A. An Inspection Plan and a technical object must be assigned to the same class. This is true because the inspection plan and the technical object must have matching classification characteristics for the inspection checklist generation. The class defines the characteristics that are relevant for the inspection plan and the technical object1.
* B. A PM task list with inspection point type must be assigned to the maintenance order. This is false because the inspection checklist generation does not depend on the PM task list. The inspection checklist is based on the QM inspection plan, which is a different type of task list2.
* C. An object list must have been generated manually or automatically. This is true because the object list contains the technical objects that will be checked for matching inspection plans. The object list can be generated from the header object of the order, and objects from the maintenance plan item3.
* D. A checklist type must be assigned to the maintenance order header. This is false because the checklist type must be assigned to the maintenance order operation, not the header. The checklist type defines the inspection lot origin and the inspection type for the inspection checklist4. References
: 1: Explaining Inspection Checklists 2: Inspection Lot 3: Object List and Inspection Checklist 4: Checklist Type in Task List Operation
質問 # 51
Which parameter in a maintenance strategy do you use to set the start/end date of the maintenance order?
- A. Package offset
- B. Scheduling type
- C. Initial/subsequent buffer
- D. Call horizon
正解：C
解説：
Preventive Maintenance
質問 # 52
You want to create a new functional location. Which selling is part of the Customizing for the functional location category? Note: There are 3 correct answers to this question
- A. Measuring point category
- B. Object information
- C. Warranty category
- D. Usage period
- E. Status profile
正解：A、B、E
解説：
The Customizing for the functional location category includes the following settings: usage period, object information, and status profile.
* The usage period defines the start and end dates of the functional location's usage. It can be used to control the validity of maintenance plans and orders, and to calculate the age of the functional location. You can define the usage period in the Customizing activity Define Functional Location Categories1.
* The object information defines the additional data that can be entered for the functional location, such as manufacturer, construction type, serial number, and equipment number. You can define the object information in the Customizing activity Define Functional Location Categories1.
* The status profile defines the user statuses that can be assigned to the functional location. The user statuses can be used to control the business transactions that are allowed for the functional location, such as creating orders, notifications, or measuring documents. You can define the status profile in the Customizing activity Define Status Profile2.
References: 1: Define Functional Location Categories 2: Define Status Profile
質問 # 53
What are some SAP recommended guiding principles to achieve clean core operations?
Note: There are 3 correct answers to this question.
- A. Establish release management.
- B. Establish regular housekeeping tasks and procedures.
- C. Define roles and responsibilities as part of a process transformation office.
- D. Establish an organizational structure, technical foundation, and transformation methodology for clean core.
- E. Integrate clean core practices in the end-to-end value process chain.
正解：B、C、E
解説：
Topic: 7
Maintenance Processing - Basic Functions
質問 # 54
......
無料提供中C-S43-2023ブレーン問題集とC-S43-2023リアル試験問題を試そう：https://www.goshiken.com/SAP/C-S43-2023-mondaishu.html
SAP C-S43-2023実際の問題とブレーン問題集：https://drive.google.com/open?id=1EgldkP7EeC742VMW0cLGfAebY9zMD0Rg